垃圾焚烧飞灰物理化学性质的实验研究

应用激光粒度粒形分析仪、灰熔融性测定仪、原子吸收光谱仪和XRD等仪器手段对国内2种垃圾焚烧飞灰的密度、颗粒特性、熔点、成分和晶相结构等物理化学性质进行了详细的研究。研究发现，2种灰样颗粒直径的数量积分分布非常接近，其中基本没有超过40／μm的颗粒。由于垃圾焚烧飞灰在化学成分上存在的差异导致了其熔点有很大的不同。此外，XRD结果显示不同来源的飞灰其晶相结构存在较大的差别，这可能与垃圾的来源和焚烧工艺以及烟气处理方法有关。实验结果为飞灰无害化低温烧结工艺的选择和运行参数的制定提供了依据。     

Carbon isotope ratios in logged and unlogged boreal forests: Examination of the potential for determining wildlife habitat use

Due to assimilation of recycled CO₂ from litter decomposition and photosynthetic changes in carbon fractionation at low light levels, the foliage at the base of a forest is often more depleted in¹³C compared to that exposed to the atmosphere in either the canopy or in open clearings. This is referred to as the canopy effect. African research has indicated that these habitat differences in foliar ¹³C can be substantial enough to affect the carbon isotope ratios of resident fauna. Previous work documenting a 30-year chronology on moose teeth from Isle Royale National Park indicated a progressive depletion in¹³C and suggested that this could be due to forest regrowth following extensive burning. The present study examined the assumption implicit in this hypothesis that foliar ¹³C varies between open and closed boreal forest sites. I found a marginal canopy effect of 2 ¹³C difference between upper canopy and ground flora for a forest in northwestern Ontario and an average difference of 1.2 in under- and mid-story vegetation between closed forests and open clear-cuts. Because of these small differences, the utility of carbon isotope analysis in quantifying temporally integrated exploitation of deforested habitats will be low for northern boreal locations. In denser forests, such as those in the tropics or western North American where the canopy effect can be expected to be much greater, ¹³C analysis may still offer some promise for determining selection by wildlife of disturbed habitats.     

Synthesis and biodegradation of poly(γ-butyrolactone-co-l-lactide)

Biodegradable polyesters were synthesized by ring-opening copolymerization of -butyrolactone (BL) and its derivatives withl-lactide (LLA). Although tetraphenyl tin was the main catalyst used, other organometallic catalysts were used as well.¹H and¹³C NMR spectra showed that poly(BL-co-LLA)s were statistical and that their number-average molecular weights were as high as 7×10⁴. The maximum BL content obtained from copolymerization BL/LLA was around 17%. TheT _m andT _g values of the copolymers showed a gradual depression with an increase in BL content. NoT _m was obtained for the copolymers containing more than 13 mol% BL. The biodegradability of the copolyesters was evaluated by enzymatic hydrolysis and nonenzymatic hydrolysis tests. The enzymatic hydrolysis was carried out at 37°C for 24 h using lipases fromRhizopus arrhizus andR. delemar. Hydrolyses by both lipases showed that an increase in BL content of the copolymer resulted in enhanced biodegradability. Nonenzymatic accelerated hydrolysis of copolymers at 70°C was found to increase proportionally to their exposure time. The hydrolysis rate of these copolymers was considerably faster than that of PLLA. The higher hydrolyzability was recorded for the BL-rich copolymers. The copolymerization of -methyl--butyrolactone (MBL) or -ethyl--butyrolactone (EBL) with LLA resulted in relatively LA-rich copolymers.     

Enzymatic degradation of poly([R,S] β-hydroxybutyrate)

The synthetic analogue of a bacterially produced polyester, poly(-hydroxybutyrate) (PHB) was synthesized from racemic -butyrolactone using anin situ trimethyl aluminum-water catalyst. The polymer was fractionated into samples differing in molecular weight and isotactic diad content. The latter was closely related to degree of crystallinity. The biodegradation of these fractions were examined by monitoring mass loss over time in the presence of anAlcaligenes faecalis T1 extracellular bacterial poly(-hydroxybutyrate) depolymerase. The fraction with high isotactic diad tacticity content showed little or no degradation over a 50 hour incubation period, whereas the fraction of intermediate isotactic diad content degraded in a continuous steady fashion at a rate that was less than that for bacterial PHB. The low isotactic diad fraction underwent a rapid initial degradation, followed by no further mass loss. The presence of stereoblocks in the polymer structure of the various fractions was an influence on the degree of susceptibility towards degradation and is related to sample crystallinity.     

混合填充体系对铬渣中六价铬的阻留作用

以铬渣和粉煤灰为混合填充体系的主要填料，采用柱子淋洗法，通过改变混合填料的配比来研究其对铬渣中Cr(Ⅵ)的阻留作用。试验结果表明，各种混合填充体系对Cr(Ⅵ)均有一定程度的阻留作用，其中I—5校对Cr(Ⅵ)的阻留固定效果最佳，淋出液中Cr(Ⅵ)的质量分数为0．删％，相对阻留效果达94．53％。     

Effects of Acidification and its Mitigation with Lime and Wood Ash on Forest Soil Processes: A Review

Anthropogenic acid deposition causes forest soil acidification and perturbation of the soil forming processes. The impact of soil acidification on tree growth is discussed in view of the role of mycorrhizal fungi in weathering and nutrient uptake. A review has been carried out of experiments involving treatments of forest soil by lime and wood ash, where soil properties and soil solution composition have been investigated. Results from these experiments in Europe and North America are summarized. In general, the content of C in the mor layer decreased as a result of treatment due to higher microbial activity and soil respiration as well as increased leakage of DOC. In addition, the content of N in the mor layer, in general, decreased after treatment and there are occasional peaks of high NO₃concentrations in soil solution. In nearly all reviewed investigations the pH of the deep mineral soil solution decreased and Al, SO₄and NO₃concentrations increased after treatment. These effects are probably due to the high ionic strength and increased microbial activity as a consequence of the treatments. In the soil, pH, CEC and base saturation increased in the upper horizons, but decreases in the upper mineral soil are also reported. In general, there was no increase in tree growth as a result of these treatments. The positive effects of the treatments on soil processes and tree growth are therefore questionable. In view of these conclusions, an investigation was carried out on the soil and soil solution chemistry and the role of mycorrhizal fungi in a spruce stand treated with two doses of lime and another treated with lime/ash in southern Sweden. The results of this investigation is reported in this volume.     

Drying of granulated wood ash by flue gas from saw dust and natural gas combustion

At the district heating plant of Kalmar, Sweden an on-line unit for production of granulated wood ash for nutrient recycling on forest soils is being applied. Currently, the granules are dried by hot air from an oil-fired burner. The objective of this work was to investigate how drying by flue gas affects the hardening of granules, or impacts their chemical composition and properties. Ninety-six granule samples were treated by flue gas from natural gas combustion in a laboratory pilot scale flue gas generator. CO₂, CO, O₂, C₃H₈ and NO concentrations were varied during the experiment. Additionally, some samples were treated by flue gas from combustion of sawdust at the heating plant in Kalmar. Drying by flue gases did not affect the chemical composition of granules, but minor effects were seen in their mineralogy. The carbonate content was slightly higher in granules treated with flue gas from natural gas combustion compared to the granules dried by hot air only, when measured by wet chemical methods. Results from XRD analysis imply that the calcite content is higher and the portlandite and arcanite content slightly less in granules treated with flue gas from sawdust combustion compared to the granules dried by hot air only. The results from this investigation showed no negative effects on ash granule composition or physical structure by the use of a flue as a drying medium.     

以造粒粉煤灰为过滤介质去除景观水中磷的研究

研究了造粒粉煤灰的最大磷吸附量、磷吸附速率等吸附特征，以及颗粒粒径、磷浓度、水力负荷对景观水除磷效果的影响。还进行了为期21天的连续过滤试验，发现滤床在高水力负荷条件下能持续地去除景观水中的磷。     

青岛理工大学安全工程专业实验室建设探讨

安全工程专业的学科建设离不开安全实验室的建设,就青岛理工大学的安全工程专业实验室建设进行了探讨.从实验室建设的重要地位入手,结合安全工程的专业课程设置情况,提出了安全工程实验室应设置的实验内容.     

安全工程的专业课程设置中存在的问题与研究

笔者首先指出了我国高校安全工程的专业课程设置和课程内容安排中存在的较为普遍的问题:课程设置与课程内容安排缺乏可操作性强的理论指导;在教学中同名专业课程,不同学校采用不同教材,教师讲授的内容,都存在较大差别和分歧。其次,从学科知识体系的层次结构的角度,将安全工程学科的专业知识划分为两大层次(包含6个小层次)。在此基础上,笔者将安全工程专业课程体系分为学科基础课程和横向展开课程;提出了安全工程的专业课程设置与课程内容安排应遵循的完备性和系统性原则;同时,给出了支持具体操作的表格。通过实践,对安全工程专业课程设置的新思路的合理性与可行性进行了检验。