哈尔滨市产业转移前后水环境安全度变化研究

基于松花江流域特点与产业转移对水环境的影响,从压力层、状态层、响应层3个方面构建水环境安全评价指标体系,并利用模糊综合评价的方法,对哈尔滨市产业转移前后的水环境安全进行了评价。结果表明：在承接产业转移初期哈尔滨市水环境安全度有所下降,但在转移后期却有了明显提高。另外,各目标层水环境安全度在转移初期也均有不同程度的下降,且随着产业转移进程的推进,压力层水环境安全度基本保持不变,状态层与响应层水环境安全度呈现缓慢上升趋势,说明产业转移不一定对水环境造成消极影响,如果政府能采取合理应对措施,产业转移也能成为水环境保护的契机。     

CRH_1型动车组一等座车厢火源热释放速率研究

为了得到不同通风条件和旅客行李条件下CRH1动车组一等座车厢的火源热释放速率的合理取值范围,以CRH1型动车组一等座车厢为研究对象,以锥形量热仪和大型量热仪测定的高速客车车体内材料和行李的燃烧性能为输入参数,运用FDS软件模拟6种火灾场景下车厢的火源热释放速率随时间的变化规律,分析了通风条件、火灾荷载密度、可燃物间距和行李重量对车厢火源热释放速率的影响。研究结果表明:在不考虑旅客行李时,各种通风条件下车厢最大火灾热释放速率在1.86-4.34MW之间;在车门与车窗开启条件下,与不考虑旅客行李的情况比较,人均携带10、20kg行李时,火源热释放速率分别增加了12.84、15.38MW,增加的幅度分别为570%和684%。     

珠光体耐热钢膜式水冷壁制造工艺优化

本文简要介绍了膜式水冷壁管屏制作工艺过程和珠光体耐热钢水冷壁管屏制造过程中易产生的缺陷分析,通过改进优化成排弯曲模具,焊前清理、预热,避免外侧管椭圆度、焊接气孔、咬边等缺陷。结合工艺试验分析了珠光体耐热钢管屏热矫正后不恰当的冷却方式引起延迟裂纹的原因,从而总结出珠光体耐热钢水冷管屏焊后热矫正时需特别注意的加热方法、加热温度及冷却方式,确保产品质量。     

北京城市发展新区土地利用景观格局分析

以北京南部城市发展新区典型代表———房山、大兴、通州3处作为研究区,运用马尔科夫转移矩阵和景观格局指数的方法,进行土地利用变化和景观格局分析。通过对2001—2006年、2006—2011年两个时段的对比分析,发现2001—2006年研究区存在草地、林地、耕地等非建设用地类型面积下降,建设用地面积上升的趋势,且2006—2011年该趋势更加明显。结果表明研究区自然景观向人文景观变革迅速,并面临着后备土地资源不足等问题,亟需调整土地利用方式并优化景观系统空间格局。     

API Standard 521 new alternative method to evaluate fire relief for pressure relief device sizing and depressuring system design

Since the 1950's, API Standards have provided guidance on determining relief loads for equipment exposed to pool fires. The API method is empirical based on tests performed in the 1940's. There is increasingly widespread interest in analytical methods based on heat transfer principles to model fire heat input. The API committee agreed to include an analytical method in the 6th edition of API Standard 521 to establish relief loads for pressure relief devices and to design depressuring systems for the fire scenario. The analytical method provides more flexibility than the empirical method but has limitations (e.g., too many permutations are possible leading to potential under-sizing of the pressure relief device).This paper discusses the basis for the empirical method in API Standard 521 and provides comparisons of the empirical and analytical method with two more recent large-scale pool fire tests. This pool fire test data indicates that the empirical method will provide a conservative estimate of pool fire heat input for most applications and is still the method of choice when designing pressure relief systems. However, these recent tests indicate the empirical method needs to be modified when a vessel or equipment is partially confined by adjacent embankments or walls equal or greater than the vessel height. In such cases, the wetted area exponent should be 1.0 instead of 0.82.The analytical method is useful in determining time-versus-temperature profiles for heating unwetted vessels of varying wall thicknesses and materials of construction. These profiles, which depend upon the type of fire (e.g., unconfined pool fire, jet fire, etc.), can be combined with tensile strength and stress-rupture data to specify a depressuring system's pressure-versus-time profile. This will minimize failure and/or mitigate the effects of failure due to overheating from fire exposure.     

热媒炉导热油的清洗与更换

对热媒炉导热油系统结垢的原因进行分析.介绍了热媒炉导热油系统清洗的方法,比较各种清洗方法的异同.对清洗更换导热油时的注意事项进行说明,对试运情况及取样化验数据进行分析.     

Ecological selection of bacterial taxa with larger genome sizes in response to polycyclic aromatic hydrocarbons stress

Polycyclic aromatic hydrocarbons(PAHs) are ubiquitous priority pollutants that cause great damage to the natural environment and health. Average genome size in a community is critical for shedding light on microbiome’s functional response to pollution stress within an environment. Here, microcosms under different concentrations were performed to evaluate the selection of PAHs stress on the average genome size in a community. We found the distinct communities of significantly larger genome size w...     

估算天津环境中γ-HCH归宿的逸度模型

以全天津市为研究区域,利用稳态假设的逸度模型,用Matlab软件计算了γ-HCH(林丹)在环境各相中的浓度和相间迁移通量.γ-HCH在天津气、水、土壤、沉积物、鱼、作物、蔬菜各相中的浓度分别为1.57×10^-11、7.95×10^-7、1.17 × 10^-4、4.58×10^-4、6.03×10^-4、1.60×10^-4和6.42×10^-5mol/m³,在数量级上与实测值吻合很好.估算结果表明农业施用和农药厂废水是该地区环境中γ-HCH最主要的来源,最大的汇是土壤和沉积相(占环境中总量的99%),最主要的迁移过程是水-沉、气-土的扩散和沉降,土壤和沉积物中的降解是γ-HCH消失的最主要途径.     

The correlation of total and extractable heavy metals from soil and domestic sewage sludge and their transfer to maize ( Zea mays L.) plants

A study to understand the mobility and transport of heavy metals (HMs) from soil and soil amended with sewage sludge to maize plants was carried out. The total and ethylenediaminetetraaceticacid (EDTA)-extractable HMs in agricultural soil and untreated domestic sewage sludge samples, and the correlation between the total and extractable metals in soil and sewage sludge were carried out. Pot experiments were performed to study the transfer of HMs to maize grains, grown in soil (control) and in soil amended with sewage sludge (test samples). The total and extractable HMs in soil, sewage sludge, and maize grains were analysed by FAAS/ETAAS (flame atomic absorption spectrometer/electrothermal atomic absorption spectrometer) after digestion in microwave oven. Statistically significant correlations were obtained between the total contents of Cu, Cd, As and their respective extractable fractions in soil, while in domestic wastewater sludge (DWS) the better correlation was observed only for Ni and Cd. The edible part of maize plants (grains) from test samples presented high concentration of Zn, Pb, Ni, Cd, Cu, As, and Cr concentrations (80.7–85.6, 3.8–3.95, 2.35–2.5, 0.75–0.82, 3.21–3.29, 0.23–0.27, and 0.22–0.29?mg?kg^?1, respectively). Good correlations were found between metals in exchangeable fractions of both soil and DWS and total metals in control and test samples of maize grains. The transfer factor of all HMs from DWS to maize grains was also determined.     

Charge‐transfer chromatographic study of the interaction of commercial pesticides with hydroxypropyl‐β‐cyclodextrin

The interaction between 33 commercial pesticides with hydroxypropyI‐β‐cyclodextrin (HPBCD) was studied by charge‐transfer reversed‐phase thin‐layer chromatography using aqueous sodium chloride solutions as eluents. Each pesticide interacted with HPBCD, their lipophilicity linearly decreased with increasing HPBCD concentration, the pesticide ‐ HPBCD complex (probably inclusion complex) always being more hydrophilic than the uncomplexed pesticide. In many cases the retention of pesticide increased with increasing concentration of salt in the eluent. This effect can be tentatively explained by the suppression of the dissociation of the polar groups in the solute molecules resulting in increased apparent lipophilicity. No significant correlation was found between lipophilicity and complex stability or between salting‐out effect and lipophilicity, that is other than hydrophobic forces are involved in the pesticide ‐ HPBCD interaction.