中药工业废水处理研究进展

概述了目前中药工业废水处理应用的各种物化、生物处理技术;对主要处理工艺的应用特点进行了论述;指出了中药工业废水处理技术今后的研究开发方向和思路。     

卫生填埋场黏土衬层密实性试验研究

开展卫生填埋场中的黏土衬层密实性试验研究对填埋场的工程设计和后期运营具有现实意义.黏土压实的直接影响之一就是孔隙率的减小,并改变黏土的电阻率,为高密度电阻率法在衬层密实性中的调查研究提供了前提条件和物理基础.文章采用高密度电阻率法三种装置(测深、温纳、偶极-偶极)进行对比测量,通过电阻率成像技术对压实黏土的电性特征进行...     

戊唑醇残留分析方法实验室内质量控制研究

文章确立了小麦、香蕉中戊唑醇残留检测方法,小麦样品加水10 mL用丙酮为萃取溶剂,石油醚液液分配,中性氧化铝柱层析净化,用气相色谱(GC-NPD)检测。香蕉样品加水5 mL用丙酮为萃取溶剂,石油醚液液分配,浓缩后用气相色谱(GC-NPD)检测。分别设置不同时间批次,同一批次间的平行样及实验室内人员分析,分别从方法灵敏度、方法准确度、方法精密度及其质量控制图、标准工作液的稳定性来探讨该方法的可靠性,结果表明该方法可以作为香蕉和小麦种戊唑醇残留检测的标准分析方法。     

碳钢在高温高盐矿井水中腐蚀与缓蚀性能的试验研究

为了解决高温高盐矿井水对碳钢管道和设备腐蚀问题,进行了缓蚀挂片试验,研究适应该类水质的缓蚀剂种类和最佳投加量。试验结果表明：软化剂氢氧化钙和碳酸钠对碳钢均有一定缓蚀效果．其平均缓蚀率分别为17．33％、57．46％。因此药剂软化过程同时达到防腐效果有限：单独投加缓蚀剂HEDP的缓蚀效果明显,其静态缓蚀率82．46％以上,动态缓蚀率76．45％：复合配方缓蚀剂的缓蚀效果最好,最佳配方为“有机膦酸一聚环氧琥珀酸一锌盐”或“有机膦酸一磺酸基团多元共聚物一锌盐”,在投加量80mg／L时动态缓蚀率接近90％。     

火焰原子吸收光谱法测定电镀废水中高浓度的锡

采用盐酸消解样品,用火焰原子吸收光谱法测定电镀废水中高浓度的锡的质量浓度,方法简单可靠。通过实验样品的分析,验证了方法的准确度和精密度。该方法干扰少,数据准确,适合废水分析。     

Removal of phosphate from wastewater using alkaline residue

Alkaline residue(AR) was found to be an efficient adsorbent for phosphate removal from wastewater. The kinetic and equilibrium of phosphate removal were investigated to evaluate the performance of modified alkaline residue. After treatment by NaOH(AR-NaOH), removal performance was significantly improved, while removal performance was almost completely lost after treatment by HCl(AR-HCl). The kinetics of the removal process by all adsorbents was well characterized by the pseudo second-order model. The Langmuir model exhibited the best correlation for AR-HCl, while AR was effectively described by Freundlich model. Both models were well fitted to AR-NaOH. The maximum adsorption capacities calculated from Langmuir equation were in following manner: AR-NaOH AR AR-HCl. Phosphate removal by alkaline residue was pH dependent process. Mechanisms for phosphate removal mainly involved adsorption and precipitation, varied with equilibrium pH of solution. For AR-HCl, the acid equilibrium pH( 6.0) was unfavorable for the formation of Ca-P precipitate, with adsorption as the key mechanism for phosphate removal. In contrast, for AR and ARNaOH, precipitation was the dominant mechanism for phosphate removal, due to the incrase on pH( 8.0) after phosphate removal. The results of both XRD and SEM analysis confirmed CaHPO4·2H2O formation after phosphate removal by AR and AR-NaOH.     

Removal of polycyclic aromatic hydrocarbons from aqueous solution by raw and modified plant residue materials as biosorbents

Removal of polycyclic aromatic hydrocarbons （PAHs）, e.g., naphthalene, acenaphthene, phenanthrene and pyrene, from aqueous solution by raw and modified plant residues was investigated to develop low cost biosorbents for organic pollutant abatement. Bamboo wood, pine wood, pine needles and pine bark were selected as plant residues, and acid hydrolysis was used as an easily modification method. The raw and modified biosorbents were characterized by elemental analysis, Fourier transform infrared spectroscopy and scanning electron microscopy. The sorption isotherms of PAHs to raw biosorbents were apparently linear, and were dominated by a partitioning process. In comparison, the isotherms of the hydrolyzed biosorbents displayed nonlinearity, which was controlled by partitioning and the specific interaction mechanism. The sorpfion kinetic curves of PAHs to the raw and modified plant residues fit well with the pseudo second-order kinetics model. The sorption rates were faster for the raw biosorbents than the corresponding hydrolyzed biosorbents, which was attributed to the latter having more condensed domains （i.e., exposed aromatic core）. By the consumption of the amorphous cellulose component under acid hydrolysis, the sorption capability of the hydrolyzed biosorbents was notably enhanced, i.e., 6-18 fold for phenanthrene, 6-8 fold for naphthalene and pyrene and 5-8 fold for acenaphthene. The sorpfion coefficients （Kd） were negatively correlated with the polarity index [（O＋N）/C], and positively correlated with the aromaticity of the biosorbents. For a given biosorbent, a positive linear correlation between logKoc and logKow for different PAHs was observed. Interestingly, the linear plots of logKoc-logKow were parallel for different biosorbents. These observations suggest that the raw and modified plant residues have great potential as biosorbents to remove PAHs from wastewater.     

固相萃取-高效液相色谱法测定水中丙烯酰胺研究

采用固相萃取-高效液相色谱法对水中的丙烯酰胺定性、定量分析。结果显示:丙烯酰胺含量在20μg/L~400μg/L之间呈良好线性关系,回归方程Y=0.476 8X+0.845 4,相关系数R为0.997 72,检出限0.1μg/L,样品回收率在71.85%~92.28%之间,相对标准偏差为3.4%~10.9%。该方法减少了有机溶剂用量,缩短了有机溶剂暴露时间,降低污染,且能满足地表水环境质量标准(GB 3838-2002)限值要求,是水中丙烯酰胺含量准确稳定的检测方法。用该方法测定了呼和浩特市引黄入呼左岸、右岸、中浅和中深4个断面水样,均未检出丙烯酰胺。     

餐厨废弃物资源化利用与政府监管的探讨——以苏州市为例

以苏州市餐厨垃圾管理为例,从资源化处理、市场化运营模式与政府监管的角度出发,通过理论与实践相结合,对中国餐厨废弃物资源化利用的特点和现状进行分析,借鉴国内外先进工艺及管理经验,结合中国实施餐厨废弃物资源化利用和无害化处理地区的实施情况,指出并剖析在餐厨废弃物资源化不同处理模式中存在的问题,提出了加强餐厨废弃物管理的建议方案和对策.     

高效液相色谱法测定水中的六种邻苯二甲酸酯研究

建立了高效液相色谱法测定水中六种邻苯二甲酸酯(邻苯二甲酸二甲酯、邻笨二甲酸二乙酯、邻苯二甲酸二丁酯、邻苯二甲酸二(2-乙基己基)酯、邻苯二甲酸二辛酯、邻苯二甲酸丁基苄酯)的检测方法.对水样中邻苯二甲酸酯的萃取条件和高效液相色谱分析条件进行优化,采用正己烷二次萃取,浓缩定容后分析,以乙腈-水为流动相梯度洗脱,紫外检测波长226 nm,16 min可将六种邻苯二甲酸酯分离出.方法的检出限为0.13μg/L ～0.37 μg/L,加标回收率为78.6％～118.5％,相对标准偏差为0.82％～2.17％,是一种理想的测定水中六种邻苯二甲酸酯的方法.