AA3流动注射仪快速测定地表水中的总氰化物

在反复实验的基础上建立了运用Bran+Luebbe AutoAnalyzer 3流动注射分析仪快速测定地表水中总氰化物的分析方法。结果表明,该方法与传统的分光光度法相比,具有自动进样、分析速度快、测定成本低等优点。与经典的分析方法相对照,结果无显著性差异,能够满足大批量地表水监测的要求。在测试系统中引入了恒温槽,进一步提高了测试的精密度和准确度。     

Kinetic-spectrophotometric determination of free cyanide by stopped-flow reversed flow injection analysis

A stopped-flow reversed flow injection method for the determination of free cyanide is proposed. Pyridine-barbituric acid mixture is injected in the flow system as reagent to form the colour species with cyanide. The flow is stopped when the reagent zone comes in the flow cell, where absorbance-time data are collected at 580nm wavelength. The linear range of the determination is 0.1 -10μg/ml CN-. The sampling rate is 60h-1 and the relative standard deviation is 1.6% (n=16) at 5.0 μg/ml CN-1 level. With satisfactory results, the proposed method was applied to the determination of free cyanide in wastewater without sample pretreatment.     

流动注射-分光光度法测定工业废水中的Fe^2＋和Fe^3＋

将Fe^2 与邻菲啰啉的显色反应引入流动注射系统，用盐酸羟胺将Fe^3 预先还原，0～6μg/ml的Fe^2符合比耳定律，检测出限0．11μg／ml。0．25μg／mlFe^2 经5次测定的标准偏差为2．2％，进样频率为120次／h，回收率98．5～104％。对工业废水中铁的测定取得了满意的效果。     

基于固定化AChE的流动注射型酶传感器研究

以固定化鲅鱼脑组织乙酰胆碱酯酶[acetylcholinesterase,AChE(EC 3.1.1.7)]为识别元件,以pH电极为换能器,构建流动注射型AChE酶传感器.该传感器在以磷酸盐缓冲液为载液的条件下具有良好的重现性(RSD=1.427%,n=10)和敏感性,可实现对有机磷化合物的在线监测;对甲基对硫磷具有线性响应的浓度范围为4.29×10-10^-4.29×10^-8mol·L^-1,最低检测限为1.3×10^-     

Novel Biocomposites Sheet Molding Compounds for Low Cost Housing Panel Applications

Biocomposites were made by a novel high volume processing technique named biocomposite sheet molding compound panel (BCSMCP) manufacturing process. This process design was inspired by the commercial glass fiber–polyester resin composite fabrication method called sheet molding compounding (SMC). This process yields continuous production of biocomposites on a large scale, and thus can be easily adopted in industries. A unique fiber dispersion method, which enabled uniform distribution of natural fibers, was used in this process. Consistency of the process was tested by evaluating the repeatability of the resultant materials mechanical properties. The low cost biocomposites produced as a result of the processing will be used for various panel applications such as housing and transportation. The molded samples were tested for various mechanical and thermal properties, in accordance with ASTM procedures. The biocomposites were made with various natural fibers including, big blue stem grass, jute, and industrial hemp. By combining different natural fibers in varying mass fractions, hybrid biocomposites were made using this process. Grass fiber reinforced polyester biocomposites processed by the SMC line showed very promising results.     

注水残渣固化修路技术研究

针对注水残渣含碱量大,盐、油及其它杂质含量高,处理困难等特点,研究出注水残渣固化修路工艺技术。注水残渣固化后,既消除了污染源,保护了周围环境的土壤及地下水资源,又减少了土地占用面积,从而取得了显著的经济效益。     

Managing disposal of water produced with petroleum in Kuwait

Disposal of water produced with petroleum has been of great interest in Kuwait for the last 20 years. The current problem arose when the Burgan oil field, which is the second largest field in the world, experienced successive increases in the water content of the produced oil. This study introduces a decision-making analysis of the considered alternatives for the disposal of the produced water. Four alternative solutions exist for the industry as practical solutions for the disposal of water produced in Kuwait. The first method utilizes a large number of pits to discharge water. The second alternative depends on discharging water into sealed pits. The third approach to dispose water is by injecting the water underground. The last method is similar to the previous one, but takes into consideration the recovery of reservoir pressure to maintain the rate of oil production. A questionnaire was distributed to 48 experts at the top management level of the petroleum companies and the governmental authority. The data collected considered cost, efficiency, and environmental parameters. Based on the data, a statistical analysis was conducted using the factor analysis method to reduce the number of investigated variables. The analysis concluded that the optimal solution is to use the effluent injection method to discharge water produced with oil in Burgan and similar fields in Kuwait.     

果树缺铁矫正新技术—高渗液注射法

本文概述了植物的铁素营养、果材缺铁黄化病的诊断治疗方法，论述了高涌液注射法矫治果树缺铁黄化病的理论、假说、树木微型注射器、克黄灵高渗液、树干穴位注射法、树干穴位插管法及其应用前景。     

喷射时刻对柴油甲醇组合燃烧发动机颗粒物排放的影响

为了进一步减少甲醇掺烧后的柴油机颗粒物排放,在一台由增压中冷的高压共轨柴油机改造成的柴油甲醇组合燃烧(DMCC—diesel/methanol compound combustion)发动机上详细研究了柴油喷射时刻对两种燃料共燃时的颗粒物生成及其排放的影响.试验工况选择重型柴油机常用的A50工况.试验结果表明,当柴油在上止点后喷射时,颗粒物排放的数量浓度随着甲醇替代率的增加而减少,当上止点前喷射时,颗粒物的数量浓度先减少后增加.随着喷射时刻的提前,颗粒中超细颗粒所占比例增大.随着喷射时刻的推迟,甲醇替代率降低颗粒物质量浓度的作用增强,同时甲醇替代率降低颗粒物几何平均直径的作用减弱.     

成型秸秆炭吸附剂对水中Cd2+的去除特性

以水稻秸秆为原料,制取对Cd2+去除效果最佳的成型生物炭吸附剂。采取限氧升温方法,分析不同热解温度和不同热解时间的成型炭对Cd2+去除规律和特性。研究结果表明：热解温度不变,热解时间90 min去除率最大;热解时间不变,热解温度550 ℃时去除率最大;去除速率分快、慢两阶段,快阶段2 h内去除率最低达到76.83%,慢阶段10 h去除率仅20%左右;该成型炭对Cd2+吸附规律可用准二级动力模型进行拟合,拟合度Rmax2=0.987 2,该成型炭对Cd2+吸附不是单层吸附过程,而存在大量的阳离子交换量,化学反应较强烈。