石墨相氮化碳协同UV-H_2O_2光催化降解亚甲基蓝

以三聚氰胺为前驱体,经热解—回流法制备了石墨相氮化碳(g-C3N4),采用XRD、FTIR、SEM、EDS、PL等技术对g-C_3N_4进行了表征。研究了g-C_3N_4在UV-H_2O_2体系中对废水中亚甲基蓝(MB)的光降解效果。实验结果表明,UV+g-C_3N_4催化剂+H_2O_2体系能协同降解MB,在初始MB质量浓度为20 mg/L、初始废水p H为5、废水体积为250 mL、g-C_3N_4加入量为0.10 g、H_2O_2浓度为0.4 mmol/L、反应温度为25℃的优化工艺条件下,紫外光照射70 min时MB脱色率达98.32%。g-C_3N_4催化剂具有较好的重复使用性能,使用5次后MB脱色率仍保持在95.10%。     

Limits of ecodesign: the case for open source product development

Abstract

In pursuit of coping mechanisms for the challenges of sustainable manufacturing, systematic methods have been developed to allow engineers to improve the ratio between products’ utility and environmental impact. These necessary efforts remain however limited if the surrounding production and consumption practices are not called into question at the same time. This article introduces open source product development as a potential approach for unlocking the limits of existing sustainable product design practices and to lead towards alternative and eco-efficient production and consumption practices termed as participative production. First, it discusses the potential advantages of this emerging practice in terms of environmental sustainability. Second, it provides a screened qualitative environmental analysis of 18 exemplary open source hardware products. Specific sustainable design principles implemented by these products are highlighted and discussed in order to identify challenges for further common research in the field of open source and sustainable product development.     

黄、渤海滨海带大气颗粒物时空分布与来源特征

PM10作为大气污染物监测的主要指标之一,探究大气PM10浓度对大气环境质量和人体健康评价具有重要意义。黄、渤海滨海带包括京、津和辽、冀、鲁、苏等工、农业大省,区域大气PM10污染的时空分布和来源特征具有复杂性和典型性。在锦州、北京、天津、烟台、青岛、连云港和盐城7个城市布设10个采样点,含7个城市点和3个农村点,开展为期一年的大气颗粒物的采样;同时,于冬季1月和夏季7月在锦州、天津和烟台进行合计60 d的加密采样,藉以确定研究区域大气PM10的时空分布和来源特征。结果表明,黄、渤海滨海带大气年均PM10总浓度为(129’18)"g·m~(-3),单月最低值出现在2015年7月盐城农村样点15"g·m~(-3),最高值为2015年3月北京城市点307"g·m~(-3)。盐城大气PM10浓度(城市点(85’27)"g·m~(-3)和农村点(66’35)"g·m~(-3))显著低于其他样点大气PM10浓度。渤海滨海带中西部的京(140’68"g·m~(-3))、津(169’60"g·m~(-3))两市大气PM10年均浓度显著高于东部的锦州(125’41"g·m~(-3))和烟台(109’31"g·m~(-3));而且黄海滨海带大气PM10年均浓度(114"g·m~(-3))显著低于渤海滨海带年均浓度(136"g·m~(-3)),总体上表现出西高东低、北高南低的特征。黄、渤海滨海带城市点和农村点年均浓度分别为(129’18)"g·m~(-3)和(112’30)"g·m~(-3);农村点春冬季大气PM10浓度和城市点浓度相当,无显著差异,夏秋季大气PM10浓度略低于城市浓度,表明农村地区大气颗粒物污染情况也较为严重,需受到关注。区域内PM10浓度季节变化整体表现为春冬高、夏秋低。利用多元回归分析初步判断黄、渤海滨海带PM10属于复合来源,大气PM10浓度约30%的变化与降水、人均能耗和沙尘天气相关。黄、渤海滨海带大气PM10浓度的昼夜变化不大,大气PM10浓度与气温呈现正相关,与风速和降水呈现负相关,表现为受各种气象因素综合作用的影响。     

太原市土壤六六六和滴滴涕的暴露格局及健康风险

为研究六六六(HCHs)和滴滴涕(DDTs)在太原市不同功能区土壤中的暴露格局、来源以及对周围人群的健康风险,在太原市化工区、灌区、矿区、生态区周边荒地土壤中进行采样,分析测定了土壤中HCHs和DDTs含量,根据太原市人群实际情况的暴露参数和USEPA的部分参数,对土壤HCHs和DDTs的健康风险进行评价。结果表明:1)太原市表层土壤中HCHs的平均含量大小依次为化工区>灌区>矿区>生态区;DDTs平均含量的大小依次为化工区>灌区>矿区>生态区,仅6%的HCHs和3%的DDTs和的平均残留水平均高于我国土壤质量标准一级标准,但均不超过二级标准值;2)土壤中HCHs残留主要源于历史上林丹的使用,DDTs残留则来源于历史和新污染源的共同影响;3)太原市表层土壤HCHs和DDTs致癌风险大小为化工园区>矿区>灌区>生态区。非致癌风险大小为化工区>矿区>灌区>生态区。3种暴露途径的在不同功能区的健康风险贡献率大小均为经口摄入>呼吸吸入>皮肤接触;综合来看太原市表层土壤中的HCHs和DDTs并未对人类造成非致癌风险,但有一定的致癌风险。本文的研究结果可为太原市土壤质量评价和环境污染防治提供科学指导,并对太原市人群的健康风险防治提供依据。     

地面浓度反推法计算石化企业无组织排放源强

对某石化企业储罐区和原油脱酸装置区的无组织排放非甲烷总烃进行监测,对监测数据进行Pearson相关分析,运用地面浓度反推法计算源强。实验结果表明：原油脱酸装置区各采样线浓度间的相关性好,反推出的源强较为准确,50,100,150 m采样线的反推源强非常接近,分别为21.68,21.60,19.76 t/a;而储罐区监测浓度的相关性不佳,该区域的非甲烷总烃无组织排放源可能不单一,不适用地面浓度反推法计算其源强。     

阿什河水系枯水期氮污染特征与同位素源解析

在阿什河水系设置20个采样点,采用水质监测技术和稳定氮同位素示踪技术,研究了枯水期阿什河氮污染特征和硝酸盐氮污染来源。结果表明:(1)阿什河枯水期大部分采样点氨氮浓度较低,大部分区域达到或优于《地表水环境质量标准》(GB3838—2002)中Ⅲ类。上游河段硝酸盐氮浓度较低,中游河段较高,到下游河段略有降低。总氮浓度较高,最高达19.4mg/L。(2)阿什河水系采样点15 N的丰度(δ15 N)主要处于0.11%~0.21%、0.42%~0.78%、0.83%~0.88%和1.09%~1.26%。稳定15 N同位素示踪解析阿什河硝酸盐氮污染来源表明,阿什河上游污染源主要为大气沉降、土壤有机氮和人工化肥;中游主要受畜禽养殖污水和生活污水污染;下游主要受城镇生活污水和工业废水影响。     

南京大气细粒子中重金属污染特征及来源解析

利用2011年1月、4月、7月和10月在南京市区和北郊采集的气溶胶样品,研究了南京大气细粒子中zn、Ph、Hg、As和cd5种重金属的污染水平,通过元素相关性分析和因子分析方法,对细粒子中这些重金属的污染来源进行了初步解析。结果表明,南京大气细粒子及其重金属污染严重,北郊普遍比市区严重;As严重超标,cd在南京北郊超标约5倍,zn在市区与北郊的质量浓度均高于其他重金属元素。每种重金属的浓度均随季节而变化。市区细粒子中,As和zn可能主要与燃煤、轮胎灰尘和建筑扬尘等有关,Pb、Hg和cd主要来自交通尘、城市垃圾焚烧等。北郊细粒子中,As、Hg和zn主要来源于燃煤、钢铁冶炼等工业,Pb和cd主要与农作物秸秆燃烧、汽车尾气、道路扬尘等影响有关。     

Optimization-Based Atmospheric Plume Source Identification

This work applies optimization and an Eulerian inversion approach presented by Bagtzoglou and Baun in 2005 in order to reconstruct contaminant plume time histories and to identify the likely source of atmospheric contamination using data from a real test site for the first time. Present-day distribution of an atmospheric contaminant plume as well as data points reflecting the plume history allow the reconstruction and provide the plume velocity, distribution, and probable source. The method was tested to a hypothetical case and with data from the Forest Atmosphere Transfer and Storage (FACTS) experiment in the Duke experimental forest site. In the scenarios presented herein, as well as in numerous cases tested for verification purposes, the model conserved mass, successfully located the peak of the plume, and managed to capture the motion of the plume well but underestimated the contaminant peak.     

Evaluating anthropogenic N inputs to diverse lake basins: A case study of three Chinese lakes

The environmental degradation of lakes in China has become increasingly serious over the last 30 years and eutrophication resulting from enhanced nutrient inputs is considered a top threat. In this study, a quasi-mass balance method, net anthropogenic N inputs (NANI), was introduced to assess the human influence on N input into three typical Chinese lake basins. The resultant NANI exceeded 10 000 kg N km⁻² year⁻¹ for all three basins, and mineral fertilizers were generally the largest sources. However, rapid urbanization and shrinking agricultural production capability may significantly increase N inputs from food and feed imports. Higher percentages of NANI were observed to be exported at urban river outlets, suggesting the acceleration of NANI transfer to rivers by urbanization. Over the last decade, the N inputs have declined in the basins dominated by the fertilizer use but have increased in the basins dominated by the food and feed import. In the foreseeable future, urban areas may arise as new hotspots for nitrogen in China while fertilizer use may decline in importance in areas of high population density.

Electronic supplementary material

The online version of this article (doi:10.1007/s13280-015-0638-8) contains supplementary material, which is available to authorized users.     

农业源水污染物削减技术探讨

农业面源污染是水体中COD、氮、磷等指标的主要来源。它包括农药化肥施用、畜禽养殖和农村生活污水排放。对农业源水污染物进行削减是实现污染物总量控制的重要手段。通过详细总结国内外现有农业源水污染物削减技术方法,分析对比其优缺点和实用性,筛选出适用于不同农业污染来源的污水处理技术。结果表明,畜禽养殖废水的适宜处理技术有厌氧/缺氧/好氧(A/A/O)、序批式活性污泥法(SBR)、膜生物反应器(MBR)、升流式厌氧污泥床(UASB)、厌氧沼气池;农地施肥污水的适宜处理技术有SBR、MBR、UASB;农村生活污水的适宜处理技术有厌氧沼气池、生物滴滤池、人工湿地、稳定塘。