化学工业园区重大环境风险源监控技术研究与应用

基于监控系统综合集成的思想,以重大环境污染事件风险源监控技术规范、重大危险源控制规章、污染源在线监测为基础,从监控指标体系、监控布点范围及监控技术筛选三方面建立化学工业园区中重大环境风险源监控技术体系. 结果表明:重大环境风险源监控指标体系主要从企业内部及企业周边敏感受体两方面进行构建;监控范围从重大环境风险源本体、缓冲区及环境敏感受体三方面确定;监控技术筛选时考虑了环境风险源的状态、监控技术方法的实用性和环境风险源/受体属性. 以上海闵行区化学工业园区为例,经调研统计,该化学工业园区共有重大风险源87个,其中罐区60个、排放口12个,其余分散在库房、生产场所等处. 根据化学工业园区企业内部风险设施及周围敏感受体的监控指标、监控范围及常用监控技术,制定了以罐区、排放口的特征风险物质为指标,以储罐的温度、压力、图像视频、液位及排放口特征风险物质浓度的传感器监控技术为主的监控方案.      

水体中磺胺甲恶唑和甲氧苄氨嘧啶的自然光降解

实验研究了磺胺甲恶唑和甲氧苄氨嘧啶连续暴露于自然光下72 h,在pH值为4.0、7.0、9.0水体中的光降解行为,同时考察了黑暗条件下对照样品在不同pH条件下的稳定性.实验表明,光强、光照时间、水体pH都直接影响到磺胺甲恶唑的去除率.在自然光照环境下,不同pH溶液中的磺胺甲恶唑均易发生光降解,而黑暗对照样品去除率较小.甲氧苄氨嘧啶则比较稳定,几乎未发生降解,但黑暗对照样品在pH值为4.0和7.0的溶液中,与起始浓度相比,去除率大于10%,这可能主要与该药物在不同pH溶液中的离子形态及光照过程中的温度波动有关.     

尾矿库上覆排土场工程危险源辨识及安全评估技术研究

随着我国对尾砂及尾矿库场地综合利用的更高要求,尾矿库上覆排土场工程的数量不断增多。尾矿库上覆排土场工程是金属非金属矿山高危、典型并涵盖许多关键安全科学问题的特殊工程。提出了“尾矿库上覆排土场工程”的定义,总结了尾矿库上覆排土场工程的结构特点,具备隐蔽工程复杂、尾矿库固结程度难以判断、排土场变形趋势复杂等特点,提出了尾矿库上覆排土场工程危险有害因素的辨识方法;研究了工程中尾矿库固结程度、排土场结构的探测技术和方法,利用图像处理技术分析了尾矿库上修建排土场工程的隐蔽工程质量。基于上述分析结果,提出了尾矿库上覆排土场工程的灾害防治措施。上述成果可为今后在闭库尾矿库上修建排土场的安全鉴定提供重要依据。     

Heavy metals distribution and risk assessment in soils affected by tannery effluents

Effluents collected from tanneries in Sialkot showed considerably higher levels of heavy metals. Sodium (12 660.91 mg/L) among macronutrients and Cr (592.20 mg/L) among heavy metals were found in the highest concentrations. Effluent parameters, i.e. biological oxygen demand (BOD; 12.40), chemical oxygen demand (COD; 16.53), Cd (5.90), Cr (592.20) and Fe (18.59) were the respective times higher than Pakistan National Environmental Quality Standards and their continuous unchecked discharge into agricultural soils poses a potential risk. Mean concentrations (mg/L) of Cr (592.20), Ni (2.66), Mn (1.16), Fe (37.17), Zn (0.90), Cd (0.59) and Pb (1.18) in this study exceeded levels recorded to date from different tanning hubs in Pakistan. Factor analysis/principal components analysis (FA/PCA) for the effluent parameters resulted in six varimax factors, i.e. VF1 (salinity, electrical conductivity, total dissolved solids, chloride, phosphate, BOD and COD; including characteristic tannery effluent features), VF2 (pH, Cr and alkalinity; tanning operations), VF3 (Cd and Pb; dyeing processes), VF4 (Mn and Fe; finishing operations), VF5 (Ni; retaining processes) and VF6 (hardness, Ca and Cu; bating processes). Cluster analysis performed on metal data resulted in three clusters confirming metal–metal relations obtained either from FA/PCA or a correlation matrix. The results of this study are useful for heavy metal source apportionment, assessment of risk to peripheral soils and the future management of environments around tanneries.     

A modeling system for drinking water sources and its application to Jiangdong Reservoir in Xiamen city

Drinking water sources are highly valued by authorities for safeguarding the life of a city. Models are widely applied as important and effective tools in the management of water sources. However, it is difficult to apply models in water source management because water managers are often not equipped with the professional knowledge and operational skills necessary for making use of the models. This paper introduces a drinking water source simulation and prediction system that consists of a watershed model, a hydrological model and a water quality model. This system provides methods and technical guidance for the conventional management of water sources and emergency water event response. In this study, the sub-models of the system were developed based on the data of the Jiangdong Reservoir in Xiamen, and the model validation was based on local monitoring data. The hydrological model and water quality model were integrated by computer programming, and the watershed model was indirectly integrated into the system through a network platform. Furthermore, three applications for Jiangdong Reservoir water protection utilizing the system were introduced in this paper, including a conventional simulation, an emergency simulation, and an emergency measures evaluation.     

碘铈共掺杂纳米TiO_2的制备及可见光光催化性能

采用溶胶凝胶法制备了不同原料比例碘铈共掺杂纳米TiO2催化剂,运用X射线光电子能谱（XPS）,X射线衍射（XRD）,透射电镜（TEM）等检测手段对催化剂进行了初步表征.结果表明,经过450℃煅烧处理得到的TiO2、铈掺杂TiO2以及碘铈共掺杂TiO2催化剂均为锐钛矿相,掺杂的Ce和I原子可能以I—Ce—O及O—Ti—I等键合方式进入TiO2晶格内部,此外,I-Ce离子共掺杂能有效降低TiO2表面的电子-空穴对的复合.以染料罗丹明B（Rhodamine B,RhB）和无色小分子水杨酸（Salicylic acid,SA）为降解的目标化合物,发现碘铈共掺杂的最佳物质的量之比为nCe∶nI∶nTi=0.04∶0.05∶1,即I0.05Ce0.04TiO2催化剂在可见光照射下（λ〉420 nm）降解目标化合物其光化学活性明显优于单掺铈的TiO2催化剂和未掺杂的TiO2.该催化反应涉及到空穴氧化,并伴有羟基自由基（.OH）、超氧自由基（O2.-）及H2O2等氧化物种的产生.     

1,10-菲啰啉-全氟辛烷磺酸(PFOS)体系共振光散射法测定痕量镉(Ⅱ)

在pH 6.8 Britton-Robinson(BR)缓冲介质中,镉(Ⅱ)与1,10-菲啰啉(Phen)作用后与全氟辛烷磺酸(PFOS)形成离子缔合物,使体系的共振光散射信号显著增强.最大散射峰位于307.0 nm处,其增强散射信号强度与镉(Ⅱ)的浓度在6.0—342.5 ng·mL-1范围内呈线性关系,据此建立了测定镉(Ⅱ)含量的共振光散射分析方法,检出限(3!)为0.6 ng·mL-1,研究了反应产物的RLS光谱特征,适宜的反应条件和影响因素,考察了共存物质的影响.该方法用于自来水和实验室废水样中镉(Ⅱ)的测定,RSD≤4.4%.     

白光散斑法原理及其发展

白光散斑法——一种较新的用于力学实验分析的方法,从其发展历程出发,简述其在40多年里的发展历史和其目前在中国国内的发展研究现状,并就其基本原理,位移信息提取的两种方法即逐点分析法和全场分析法,做了简要叙述.简单的介绍了白光散斑法的实际测量过程,并简要总结其自身独特的优势、适用的领域和其今后大体发展的趋势.图1,参27.     

加拿大最佳管理措施流域评价项目评述

可持续农业的目的是在保持良好环境质量的同时获得较高的农业生产率。最佳管理措施(BMPs)在世界范围内已得到广泛应用,以减少农业污染物对水环境的影响。自2004年以来,加拿大农业部实施了最佳管理措施流域评价(WEBs)项目,在全国各地选择了有代表性的9个小流域,对BMPs的环境和经济效益进行评价。笔者对过去几年来WEBs项目的进展、研究方法及主要成果进行简要的回顾,并对在中国开展类似项目的必要性和启示进行了探讨。     

三江平原农田源头排水沟渠截留排水中氮素动态

通过小尺度野外原位试验,研究排水沟渠水体、底泥和植物中氮含量的变化规律.结果表明,随水体停留时间增加,沟渠对水体氮素的净化能力增强,认为停留8d左右较适宜.沟渠对NH4-N的截留率大于TN和NO3--N.渠水停留11d时,4条试验沟渠[氮浓度高、磷浓度低(NHPL),氮浓度高、磷浓度高(NHPH),氮浓度低、磷浓度低(NLPL),氮浓度低、磷浓度高(NLPH)]对NH4+-N的截留率均达100％,对NO3--N的截留率分别为84.63％、84.35％、75.67％和76.14％,对TN的截留率分别为88.02％、89.89％、90.88％和88.53％.试验结束时沟渠表层(0～15 cm)底泥氮含量降低,植物氮累积量远大于进水TN总量,说明植物生长同时吸收了水体、土壤和底泥中的氮,建议在秋季适时收割植物,以避免植物分解导致二次污染.