Diatom Thalassiosira weissflogii in oligotrophic versus eutrophic culture: models and ultrastructure

Populations of marine diatom Thalassiosira weissflogii were grown in continuous cultures enriched with f/2 medium. One of the two contrasting cultures (‘eutrophic’) received 5.6 times more nutrients than the other (‘oligotrophic’). Two mathematical models are analyzed to estimate eutrophication differences. The second model based on the Michaelis–Menten uptake and Droop growth shows that cells in the eutrophic culture should have about 56% higher content of silica which is the limiting nutrient. Diatom samples were prepared for the transmission electron microscopy after cells have been kept in chemostats for 37 days. The structure of diatom cells was investigated and a comparison is made between cells grown in oligotrophic and eutrophic conditions. In eutrophic culture, dividing cells were encountered more frequently while cell concentration was approximately equal in both chemostats. The central vacuole of cells in eutrophic culture accumulated dispersed and compact material from amorphous to spherical shape. In some cells the large central vacuole had fibrilar and peppered dense materials in addition to translucent granules, vesicules and multivesicular bodies. In the cytoplasm we found increased number of multivesicular bodies, dense and lucent granules some of which enclose membrane particles and lucent vesicules. Dense material depositions observed in the vacuole are also seen in the cytoplasm associated with organelles, mitochondria and plasmalemma. Cells have well-developed, active and slightly increased number of dictyosomes (5–6). Some dictyosomes with dense secretory material in the cistern are apparently engaged in a granule formation process. Functional significance of dense material in the central vacuole, which has not been observed in cells grown in oligotrophic condition, is discussed.     

The performance of RAMS in representing the convective boundary layer structure in a very steep valley

Data from a comprehensive field study in the Riviera Valley of Southern Switzerland are used to investigate convective boundary layer structure in a steep valley and to evaluate wind and temperature fields, convective boundary layer height, and surface sensible heat fluxes as predicted by the mesoscale model RAMS. Current parameterizations of surface and boundary layer processes in RAMS, as well as in other mesoscale models, are based on scaling laws strictly valid only for flat topography and uniform land cover. Model evaluation is required to investigate whether this limits the applicability of RAMS in steep, inhomogeneous terrain. One clear-sky day with light synoptic winds is selected from the field study. Observed temperature structure across and along the valley is nearly homogeneous while wind structure is complex with a wind speed maximum on one side of the valley. Upvalley flows are not purely thermally driven and mechanical effects near the valley entrance also affect the wind structure. RAMS captured many of the observed boundary layer characteristics within the steep valley. The wind field, temperature structure, and convective boundary layer height in the valley are qualitatively simulated by RAMS, but the horizontal temperature structure across and along the valley is less homogeneous in the model than in the observations. The model reproduced the observed net radiation, except around sunset and sunrise when RAMS does not take into account the shadows cast by the surrounding topography. The observed sensible heat fluxes fall within the range of simulated values at grid points surrounding the measurement sites. Some of the scatter between observed and simulated turbulent sensible heat fluxes are due to sub-grid scale effects related to local topography.     

Structure of turbulent plumes from a momentumless source in a smooth bed

The spatial development of a passive scalar plume is studied within the inhomogeneous turbulence of a boundary layer flow in a recirculating laboratory flume with a smooth bed. The source of the scalar is located flush with the bed, and the low-momentum source design is intended to simulate a diffusive-type scalar release. A weakly diffusive fluorescent dye is used as the scalar. Planar laser-induced fluorescence (PLIF) techniques were used to record the structure of the plume at a spatial resolution of 150 μm. The measured structure of the mean concentration field is compared to an analytical solution for shear-free, homogeneous turbulence. The laboratory plume exhibits spatial development in the mean concentration field that deviates from the self-similar behavior predicted by the analytical solution; this deviation is due to the mean shear and inhomogeneity of the turbulence. In particular, the influence of the viscous sublayer on the plume development is seen to be significant. Nonetheless, the analytical solution replicates some of the features seen in the laboratory plume, and the solution suggests methods of reducing the laboratory data even for cases where the results deviate from the analysis. We also examine the spatial development of the root-mean-square (rms) fluctuating concentration field, and use scalar probability density functions to examine the relationship between the mean and fluctuating concentrations.     

介孔纳米TiO2的超声化学法合成及其表征

采用超声化学法制备介孔TiO2，并采用XRD，TEM，FT-IR等方法对样品进行了表征．结果表明，在超声波作用下，液相体系中能够一步合成锐钛矿相TiO2；添加有机模板剂并控制实验条件，则能直接合成具有介孔结构的锐钛矿相TiO2．超声化学法能更好地控制粒子的形貌和尺寸，所制备的TiO2晶型完整，孔径均匀，分散性好．     

屋顶绿化生态系统箱的研制

调查发现广州市屋顶自然生长的维管植物有49科109属128种,植物种类较多的科为菊科、禾本科、桑科、景天科、茜草科和鸭跖草科;屋顶自然生长的植物种类数量与环境受污染程度成反比,而与周围植物的多少成正比;屋顶自然生长的植物由于长期适应屋顶的极端环境,形成了的一些独特的生态生物学特征。基于上述结果配置相应的植物组合,设计适于屋顶绿化的生态系统箱、配制相应土壤并进行技术集成,观测其生长和隔热效应。同时进行空白对照、黑网荫蓬对照、生态隔热层对照、普通土壤种植区对比试验,发现生态隔热层和生态系统箱具有成本低、易维持、隔热好、景观美的效果。     

东北过伐林灌木层物种多样性与林分因子的典型相关分析

研究林分特征尤其是经营上可以控制的因子对生物多样性的影响，将有助于制定合理的经营措施来维持和保护生物多样性，本文作者以我国东北过伐林区3种典型天然林类型为对象，采用典型相关分析方法，研究影响灌木层物种多样性的主要因子。结果表明：影响灌木层物种多样性的主要因子包括土壤含水率，树种多样性和林分密度；灌木层多样性组的变异被林分组第一典型变量解释的比例为68.32%,仍有31.68%的变异不能得到解释。     

Scanning proton microprobe microanalysis for the assessment of homogeneity of IAEA urban dust reference materials

In order to develop new reference materials for microanalytical nuclear techniques, scanning proton microprobe(SPM) technique was used to determine homogeneity level within 100x200 μm2 micro-area on the small pieces of IAEA urban dust reference materials. The experimental methods were described in detail. The results show that IAEA-396A/M Vienna urban dust is homogeneous enough for small sample analysis of standard reference material (SRM).     

装备环境工程及其管理体系的探讨

阐述了环境适应性与环境工程的概念,对国内外环境适应性领 域的现状作了介绍和分析。提出了建立环境工程及其管理体系的思 路和建议措施,以及装备研制周期各阶段的各项环境工程工作项目 及工作重点。     

电极材料对电解法处理循环式准好氧垃圾填埋场渗滤液效果的影响研究

分别用3种不同材料电极（不锈钢、Ti／Pt和Ti／RuO2-IrO2）作阳极、石墨电极作阴极在同一条件下分别对循环式准好氧填埋垃圾场渗滤液进行电解处理对比研究。研究结果表明，随着电解时间的变化，渗滤液中的COD、BOD5、BOD5／COD、重金属离子浓度、色度和pH值均会发生改变。当电解时间为10—20min时，用上述3种电极作阳极电解均会出现渗滤液COD、BOD5、BOD5／COD增大的现象；当电解时间为30—40min时，用Ti／RuO2-IrO2或Ti／Pt电极作阳极电解均可使渗滤液的色度降为0；当电解时间为120min时，分别用3种电极作阳极电解都可使渗滤液中的COD、BOD5和重金属得到有效的去除，其中用Ti／RuO2-IrO2电极作阳极电解对COD、BOD5的去除效果最好：用Ti／Pt电极作阳极电解对Pb^2＋的去除效果最好。     

Progress in developing an ANN model for air pollution index forecast

An air pollution index (API) reporting system is introduced to selected cities of China for public communication on air quality data. Shanghai is the first city in China providing daily average API reports and forecasts. This paper describes the development of an artificial neural network (ANN) model for the API forecasting in Shanghai. It is a multiple layer perceptron (MLP) network, with meteorological forecasting data as the main input, to output the next day average API values. However, the initial version of the MLP model did not work well. To improve the model, a series of tests were conducted with respect to the training method and structure optimization. Based on the test results, the training algorithm was modified and a new model was built. The new model is now being used in Shanghai for API forecasting. Its performance is shown reasonably well in comparison with observation. The application of the old model was only weakly correlated with observation. In 1-year application, the correlation coefficients were 0.2314, 0.1022 and 0.1710 for TSP, SO₂ and NO_x, respectively. But for the new model, for over 8 months application, the correlation coefficients are raised to 0.6056, 0.6993 and 0.6300 for PM₁₀, SO₂, and NO₂. Further, the new algorithm does not rely on manpower intervention so that it is now being applied in several other Chinese cities with quite different meteorological conditions. The structure of the model and the application results are presented in this paper and also the problems to be further studied.