Fe3O4/CS磁性纳米绒球高效吸附水体中的五氯酚钠

采用溶剂热法成功制备了具有新型形貌的Fe3O4/CS单分散磁性纳米绒球。选取Fe3O4/CS纳米绒球作为磁性吸附剂,研究了其脱除水中五氯酚钠(PCP-Na)的吸附性能。吸附平衡实验表明,Fe3O4/CS吸附脱除PCP-Na的吸附过程能在30 min以内迅速实现吸附平衡,且对于初始浓度为100 mg/L、初始pH为6.5的PCP-Na溶液,在25℃吸附条件下能使溶液中的PCP-Na去除率高达91.5%。吸附等温线和吸附动力学研究表明,Fe3O4/CS吸附脱除PCP-Na的吸附过程属于放热反应,遵循Langmuir吸附模型,符合Lagergren二级动力学方程。此外,在完成吸附过程后,通过一块永久磁铁即能从吸附溶剂中迅速分离出Fe3O4/CS,从而实现吸附剂的有效分离和重复利用,显示了该磁性吸附剂的优越性和用于实际废水处理的潜力。     

Synthesis and antibacterial activity of a Fe3O4–AgCl nanocomposite against Escherichia coli

In this investigation, Fe₃O₄ magnetic nanoparticles (MNPs) were prepared by the alkalinization of an aqueous medium containing ferrous sulfate and ferric chloride. In the next step, a Fe₃O₄–AgCl magnetic nanocomposite was fabricated by the drop-by-drop addition of silver nitrate solution into a NaCl solution containing Fe₃O₄ MNPs. All prepared nanoparticles were characterized by transition electron microscopy (TEM), X-ray diffraction (XRD), and energy-dispersive X-ray spectroscopy (EDS). Both particle types varied in size from 2.5 to 20?nm, with an average size of 7.5?nm for Fe₃O₄ MNPs and 12.5?nm for Fe₃O₄–AgCl nanocomposites. The antibacterial effect of the Fe₃O₄ MNPs and fabricated Fe₃O₄–AgCl nanocomposites against Escherichia coli (ATCC 35218) were investigated by conventional serial agar dilution method using the Müller–Hinton Agar medium. The minimum inhibitory concentration was 4?mg?mL^?1 for Fe₃O₄ MNPs and 2?mg?mL^?1 for the Fe₃O₄–AgCl magnetic nanocomposites. Time-kill course assays showed that the Fe₃O₄–AgCl magnetic nanocomposites successfully killed all inoculated bacterial cells during an exposure time of 60?min. The antibacterial activity of recycled Fe₃O₄–AgCl magnetic nanocomposites over four 60?min cycles of antibacterial treatment was further tested against E. coli by the colony-forming unit (CFU) method. The antibacterial efficiency of the nanocomposites was constant over two cycles of antibacterial testing.     

聚酰亚胺/锌铝双氢氧化物纳米复合材料的制备和表征

在N,N-二甲基乙酰胺溶剂中,以对氨基苯甲酸（AB）修饰改性的ZnAl双氧氧化物（ZnAl LDH）,通过原位插层方法制备聚酰亚胺／ZnAl双氢氧化物纳米复合材料。采用XRD、TEM、DMA、TGA等对其结构进行表征,与纯聚酰亚胺材料相比。纳米复合材料的储能模量、损耗模量和玻璃化转变温度L、热失重等性质,都有较大的提高。     

Au/Fe3O4/GO复合SERS基底的制备及对水溶液中低浓度芘的富集-检测

以氧化石墨烯(GO)为载体,利用静电吸附将氨基修饰的Fe_3O_4磁性纳米颗粒负载到GO表面得到GO-Fe_3O_4复合材料,再通过静电作用将Au纳米颗粒与GO-Fe_3O_4复合材料组装,制备了Au/Fe_3O_4/GO复合材料,并考察其表面增强拉曼(SERS)活性.首先以罗丹明B(Rh B)为探针分子,考察Au纳米颗粒的粒径对SERS性能的影响,发现平均粒径为40 nm的Au纳米颗粒具有最好的SERS效果.SERS检测性能随着Au负载量的提高而逐渐变优,Au/GO中Au负载量为20%时最优.以多环芳烃分子芘为探针分子,探究Au/Fe_3O_4/GO复合材料中各组分对SERS性能的影响发现,Au纳米颗粒对拉曼信号的增强起主要作用,GO可以通过化学增强效应及对芘的吸附富集作用有效提高SERS检出限,Fe_3O_4的存在可以使基底快速分离,简化实验步骤,便于基底重复利用.该方法对水溶液中芘的检出限达到10-8mol·L-1,相对于普通拉曼的检出限有了明显的降低,有望被用于环境中痕量多环芳烃的富集-检测.     

聚合物/改性白泥纳米复合材料研究与应用

白泥是造纸碱回收的废渣,国内外对造纸碱回收白泥的回收和再利用有了一定的研究,但由于技术问题和回收成本较高等原因,对白泥有效利用问题没能彻底的解决.我们在总结了目前国内外白泥回收现有技术状况的基础上,着重对白泥与聚合物共混制功能材料方面进行了相应的分析和研究,通过对白泥的改性处理并与聚合物共混制得高级别的聚合物/改性白泥纳米复合材料,扩大了回收白泥的应用领域和范围,降低了白泥的回收成本,并有效解决了白泥再利用问题.     

纳米级Pd/Fe@SiO2复合颗粒对2,4-DCP的还原脱氯研究

为有效抑制纳米级Pd/Fe颗粒的团聚和钝化及改善其表面特性,将纳米SiO_2包覆在Pd/Fe颗粒表面,超声波辐照下液相还原法制备纳米级Pd/Fe@SiO_2复合颗粒,采用TEM、SEM、XRD、EDX及BET表征其物性,以2,4-二氯苯酚(2,4-DCP)为目标污染物,探究其对2,4-DCP的还原脱氯影响因素、降解机理和动力学,结果表明:制备的纳米级颗粒粒径均匀、分散性好,比表面积大;体系中纳米级Pd/Fe投加量、钯化率、TEOS投加量、反应温度及溶液初始pH均会对2,4-DCP的降解效果产生明显影响;并推测出纳米级Pd/Fe@SiO_2复合颗粒对2,4-DCP的降解机理即快速吸附—逐步脱氯—最终脱附释放,其降解符合拟一级动力学关系.     

以废碱性电池为原料制备磁性纳米复合材料

以硝酸溶解废碱性锌锰电池所得溶液为原料,采用溶胶-凝胶法成功地制备出了Mn0.6Zn0.4Fe2O4/SiO2磁性纳米复合材料, 并对制备机理进行了探讨.借助于DTA、TG、XRD、IR、SEM和TEM等手段对制备过程进行检测, 并对产物进行表征.研究表明,先将干凝胶在590 ℃条件下预烧,再在1 120 ℃条件下煅烧可直接合成粒径在20 nm左右具有尖晶石结构的磁性纳米复合材料.     

Enhanced dechlorination of 2,4-dichlorophenol by recoverable Ni/Fe–Fe3O4 nanocomposites

Ni/Fe-Fe_3O_4 nanocomposites were synthesized for dechlorination of 2,4-dichlorophenol(2,4-DCP). The effects of the Ni content in Ni/Fe-Fe_3O_4 nanocomposites, solution pH, and common dissolved ions on the dechlorination efficiency were investigated, in addition to the reusability of the nanocomposites. The results showed that increasing content of Ni in Ni/Fe–Fe_3O_4 nanocomposites, from 1 to 5 wt.%, greatly increased the dechlorination efficiency; the Ni/Fe–Fe_3O_4 nanocomposites had much higher dechlorination efficiency than bare Ni/Fe nanoparticles. Ni content of 5 wt.% and initial p H below 6.0 was found to be the optimal conditions for the catalytic dechlorination of 2,4-DCP. Both 2,4-DCP and the intermediate product 2-chlorophenol(2-CP) were completely removed, and the concentration of the final product phenol was close to the theoretical phenol production from complete dechlorination of 20 mg/L of 2,4-DCP, after 3 hr reaction at initial p H value of 6.0,3 g/L Ni/Fe-Fe_3O_4 , 5 wt.% Ni content in the composite, and temperature of 22℃. 2,4-DCP dechlorination was enhanced by Cl-and inhibited by NO3-and SO_4~(2-). The nanocomposites were easily separated from the solution by an applied magnetic field. When the catalyst was reused, the removal efficiency of 2,4-DCP was almost 100% for the first seven uses, and gradually decreased to 75% in cycles 8–10. Therefore, the Ni/Fe–Fe_3O_4 nanocomposites can be considered as a potentially effective tool for remediation of pollution by 2,4-DCP.     

Mg (OH)2@粉煤灰复合材料对重金属离子的去除研究

根据“粒子设计”思想，以粉煤灰为载体，采用非均匀形核法制备了一种核壳结构粉煤灰负载纳米氢氧化镁复合材料，并对其吸附废水中Cu （II）、Ni （II）和Pb （II）性能进行研究.采用扫描电子显微镜（SEM）、EDS能谱、比表面积分析仪（BET）、X射线衍射（XRD）、红外光谱（FTIR）等技术对包覆前后的复合粉体进行了表征.结果表明，复合粉体表面均匀包覆了大量纳米氢氧化镁和少量水合碳酸镁，比表面积增大到原来（粉煤灰1.79m²/g）的30多倍，平均孔径由11nm增加至14.7nm.平均孔隙宽度从12.8nm增加至15.4nm.粉煤灰表面的Si-O-Si、Si-O-C与氢氧化镁之间形成Si-O-C-O-Mg和Si-O-Mg-OH.复合粉体材料去除重金属的效率明显高于原粉煤灰和氢氧化镁，其单位饱和吸附量分别达到了216.30、116.50、160.96mg/g.根据Zeta电位、FTIR及模拟方程分析了复合粉体吸附重金属离子机理，结果表明复合粉体材料对重金属离子通过沉淀反应、静电吸引、离子交换等方式进行吸附，吸附过程等温线符合Langmuir等温模型，动力学符合颗粒内扩散模型，热力学符合自发吸热反应.通过解吸再生试验发现，经过5次循环再生利用后，复合粉体对重金属离子的去除率达到50%以上，这说明复合粉体在吸附过程中具有良好的再生性能.