用电解锰阳极泥和含SO_2工业尾气制备硫酸锰

以电解锰阳极泥与电解锌生产中产生的含SO_2尾气为原料,经过反应、浸出、浸出液两次净化和浓缩结晶制备硫酸锰,考察了反应时间、含SO_2尾气的流量及反应温度对Mn~(4+)转化率的影响.实验结果表明:在反应时间45 min、反应温度20～30 ℃、含SO_2尾气流量16 L/min的条件下,Mn~(4+)转化率达90%以上;尾气中SO_2利用率随尾气流量增加而降低;所得MnSO_4·H_2O产品质量达到GB1622-86<工业级硫酸锰标准>.     

Carbon dioxide emissions from cities in China based on high resolution emission gridded data

Based on the China high resolution emission gridded data (1 km spatial resolution), this article is aimed to create a Chinese city carbon dioxide (CO₂) emission data set using consolidated data sources as well as normalized and standardized data processing methods. Standard methods were used to calculate city CO₂ emissions, including scope 1 and scope 2. Cities with higher CO₂ emissions are mostly in north, northeast, and eastern coastal areas. Cities with lower CO₂ emissions are in the western region. Cites with higher CO₂ emissions are clustered in the Jing-Jin-Ji Region (such as Beijing, Tianjin, and Tangshan), and the Yangtze River Delta region (such as Shanghai and Suzhou). The city per capita CO₂ emission is larger in the north than the south. There are obvious aggregations of cities with high per capita CO₂ emission in the north. Four cities among the top 10 per capita emissions (Erdos, Wuhai, Shizuishan, and Yinchuan) cluster in the main coal production areas of northern China. This indicates the significant impact of coal resources endowment on city industry and CO₂ emissions. The majority (77%) of cities have annual CO₂ emissions below 50 million tons. The mean annual emission, among all cities, is 37 million tons. Emissions from service-based cities, which include the smallest number of cities, are the highest. Industrial cities are the largest category and the emission distribution from these cities is close to the normal distribution. Emissions and degree of dispersion, in the other cities (excluding industrial cities and service-based cities), are in the lowest level. Per capita CO₂ emissions in these cities are generally below 20 t/person (89%) with a mean value of 11 t/person. The distribution interval of per capita CO₂ emission within industrial cities is the largest among the three city categories. This indicates greater differences among per capita CO₂ emissions of industrial cities. The distribution interval of per capita CO₂ emission of other cities is the lowest, indicating smaller differences of per capita CO₂ emissions among this city category. Three policy suggestions are proposed: first, city CO₂ emission inventory data in China should be increased, especially for prefecture level cities. Second, city responsibility for emission reduction, and partitioning the national goal should be established, using a bottom-up approach based on specific CO₂ emission levels and potential for emission reductions in each city. Third, comparative and benchmarking research on city CO₂ emissions should be conducted, and a Top Runner system of city CO₂ emission reduction should be established.     

环丁砜-哌嗪溶液吸收烟道气中二氧化碳

采用搅拌实验装置,研究环丁砜溶液及不同配比的环丁砜-PZ复合溶液对烟道气中二氧化碳的吸收和解吸性能,揭示了吸收容量与酸碱度、时间之间的内在联系,并对CO2初始逸出温度、试液再生温度、试液再生率、再生pH下降率进行了细致记录分析。实验结果表明,环丁砜-PZ复合溶液配比为0.4∶0.6时:吸收效果最佳,吸收量约为0.126 mol;再生温度最高,为105℃;再生率最高,为90.34%。同时与相同配比的MEA、DEA相比具有较大再生优势。实验结果还表明,环丁砜-PZ复合体系之间存在负交互作用。     

纳米二氧化钛复合石墨烯催化剂的制备及处理染料废水

以硫酸钛为原料,采用共沉淀法,制备了一系列纳米二氧化钛复合石墨烯催化剂,采用XRD和FTIR对样品进行表征。通过紫外光照射亚甲基蓝溶液光催化降解实验,研究石墨烯的加入量对TiO2光催化性能的影响,结果表明,TiO2-GO-5具有最佳的光催化性能。在pH=6.00、TiO2-GO-5的投加量为0.070 g/50 mL、光照3 h条件下,100 mg/L亚甲基蓝溶液的脱色率达到最大值为90.52%。     

模拟阳光下Ag／I-TiO2光催化预处理山核桃加工废水

研究了在模拟太阳光下,采用银修饰的碘掺杂二氧化钛光催化剂（Ag／I—TiO2）对某食品厂山核桃加工废水进行光催化预处理的效果。结合x射线衍射（XRD）、比表面积分析（BET）、紫外-可见漫反射光谱（uV—Vis）的表征结果,来分析催化剂结构对于废水处理效果的影响。探讨了Ag含量、废水初始pH（pHi）和光照时间等因素对化学需氧量（COD）去除及水质可生化性（B／C）提高的影响。并得出适宜的反应参数为：3％Ag含量;pHi为6;光照时间为240min。在最佳条件下,COD去除率45％,废水B／C比由0．17上升到0．31。光催化氧化法能够有效降低山核桃加工废水的COD含量,并达到显著提高废水可生化性的目的。     

ClO2氧化法预处理联苯胺类染料中间体废水

采用ClO₂氧化法预处理联苯胺类染料中间体生产废水,探讨了影响COD和联苯胺去除率的主要因素,并采用GC/MS技术对ClO₂氧化前后废水中的有机组分进行了分析。实验确定了较佳的工艺参数：ClO₂加入量为45~55 mg/L,ClO₂与联苯胺的化学计量比控制在（3.0~3.5）∶1,反应时间为 30~35 min。在此条件下,ClO₂氧化后出水中联苯胺去除率达到80%以上,联苯胺类污染物含量得到有效降低,废水BOD₅/COD由原水的0.18提高到0.40。该方法能提高废水的可生化性,是一种较好的生化预处理技术。     

循环式超声强化光催化降解双酚A

设计了一种循环式超声强化光催化反应器,以TiO2作为光催化剂,研究了超声功率、TiO2加入量、循环液流速和空气流量对双酚A(BPA)降解效果的影响。实验结果表明:超声与光催化过程在循环式超声强化光催化反应器中实现了较好的协同效应;在初始BPA质量浓度为20.0mg/L、超声功率为600W、TiO2加入量为7g/L、循环液流速为4.05×10-2m/s、空气流量为200mL/min的条件下,反应150min后,BPA降解率可达90.5%,溶液中剩余BPA质量浓度仅为1.8mg/L,反应240min后TOC去除率可达84.5%。     

对普光气田油菜的二氧化硫熏气实验

为探讨普光气田废气对周围农作物的影响和生物监测方法,选择气田周边油菜作为受试样本,对其进行二氧化硫现场熏气实验。结果表明,油菜在受到1.43 mg/m3浓度、3小时二氧化硫熏气后,植株耐受,不产生明显受害症状;叶片含硫量、MDA含量、可溶性蛋白含量等指标的测定结果与二氧化硫熏气浓度、熏气时间存在显著的相关关系。     

Ti（Ⅳ）催化臭氧／过氧化氢预处理酸性难降解废水

在Ti（Ⅳ）和过氧化氢存在条件下,考察了臭氧化酸性苯乙酮溶液、硝基苯溶液和垃圾渗滤液（浙江衢州某垃圾填埋场）的预处理效能。结果表明,在pH2．86条件下,单独臭氧化处理对苯乙酮、硝基苯和垃圾渗滤液的COD去除率分别为10．1％、44％和28．6％。BOD,／COD值分别从原来的0．039、0．060和0．085提高到了0．130、0．158和0．174,仍属生化难降解废水。当体系加入Ti（Ⅳ）后,臭氧化苯乙酮和硝基苯的COD去除率分别达到了75．5％和65％,BOD;／COD则提高到了0．679和0．314,可生化性提升明显。对于垃圾渗滤液,只有当体系加入Ti（Ⅳ）和H22后,臭氧化COD的去除率达到66．6％,BOD、／COD提高至0．425。上述结果对酸性难降解废水的处理实际意义非常突出。     

云母钛珠光颜料的应用研究

介绍了一种不使用有机溶剂获得云母钛珠光颜料、水性金属效果云母钛珠光浆、珠光涂料的环保型制备工艺和性能.采用液相沉积法获得了不同厚度的纳米TiO2薄膜包覆层而显示银白、金、红、紫、蓝、绿等各种色彩的系列珠光云母颜料;应用珠光云母颜料与分散剂等水性助剂混合,获得了水性金属效果云母钛珠光浆的制备工艺;应用云母钛珠光浆与乳液配合,获得了云母钛珠光涂料的制备工艺.制备的云母钛珠光涂料系列多彩,白度高、反射率大、珠光效果好,硬度、附着力、耐候性等指标优异.