用环己烷氧化副产物制备浮选剂

在固体酸催化剂作用下,用环己烷氧化制备环己酮的副产物——酸性油和轻质油进行酯化反应,制备了羧酸混合酯,酯化反应的最佳工艺条件：n（C4-C5醇）：n（有机羧酸）=1．2：1,催化剂质量分数为1．5％,反应温度为110-160℃,反应时间为5h。经应用评价结果表明,该羧酸混合酯是一种性能优异的选煤浮选剂。     

稠油废水生物处理主要影响因素分析

有机聚合物和石油烃类物质是稠油废水中的主要污染物.应用辽河油田锦采污水处理厂稠油废水中筛选分离出的菌株B0501,分析其在稠油废水生物处理过程中对废水COD_Cr的去除作用,研究了不同温度,pH,水力停留时间以及添加氮、磷营养盐等条件下微生物对废水COD_Cr去除的影响.结果表明:稠油废水中投加的外源微生物B0501提高了废水中COD_Cr的去除率;接种后,废水在30 ℃,pH为7.5,水力停留时间为216 h,添加氮、磷营养盐(ρ(氮)/ρ(磷)为5.63)的条件下,废水COD_Cr去除率大幅度提高,其ρ(COD_Cr)满足国家污水综合排放一级标准(GB 8798-1996).经形态观察和生理生化反应鉴定,菌株B0501为液化金杆菌(Aureobaterium liquefaciens).      

操作条件对超滤膜运行经济稳定性能的影响

采用正交实验的方法对棕榈油生产废水二级处理出水的超滤工艺条件进行考察和优化,并用膜通量衰减系数、平均跨膜压差及产水量各自加权相加所得综合指标来表征不同超滤操作条件下膜运行的经济稳定性能。正交试验结果表明,减小膜表面流速和产水率,提高处理废水温度均有利于系统经济稳定地运行;各运行参数对综合指标影响的大小顺序为:膜表面平均流速>产水率>温度;在保证出水质量的前提下,最佳组合操作条件为膜表面平均流速0.7m/s,产水率80%,废水温度30℃。     

蜡防印花生产废水处理工程扩改设计

对蜡防印花生产废水处理工程进行扩改设计,实际结果表明:机械洗蜡废水分流后经双级气浮处理,蜡回收率和处理水回用率可达90%以上;皂化脱蜡废水分流后采用酸化-气浮处理,蜡回收率可达95%以上,出水与印花水洗废水经微电解脱色,脱色率可达85%以上;混合废水经混凝气浮-生物接触氧化-沉淀-过滤组合工艺处理,出水达标排放。该处理工艺效率高,效果稳定,经济效益和环境效益高。     

Decommissioning of offshore oil and gas facilities: a comparative assessment of different scenarios

A material and energy flow analysis, with corresponding financial flows, was carried out for different decommissioning scenarios for the different elements of an offshore oil and gas structure. A comparative assessment was made of the non-financial (especially environmental) outcomes of the different scenarios, with the reference scenario being to leave all structures in situ, while other scenarios envisaged leaving them on the seabed or removing them to shore for recycling and disposal. The costs of each scenario, when compared with the reference scenario, give an implicit valuation of the non-financial outcomes (e.g. environmental improvements), should that scenario be adopted by society. The paper concludes that it is not clear that the removal of the topsides and jackets of large steel structures to shore, as currently required by regulations, is environmentally justified; that concrete structures should certainly be left in place; and that leaving footings, cuttings and pipelines in place, with subsequent monitoring, would also be justified unless very large values were placed by society on a clear seabed and trawling access.     

Oil and power industries’ responses to EU emissions trading: laggards or low-carbon leaders?

ABSTRACT

How have petroleum and power companies and their European industry associations responded to the EU emissions trading system (ETS)? Responses can be political, directed externally towards the initiation and reforms of the EU ETS itself, or internally and market-based, directed at low-carbon solutions. Proactive response strategies shape companies’ leadership potential. Variation in responses is explained by two models that differ in assumptions about corporate behaviour as well as the wider multilevel regulatory context in which companies operate. Responses are found to have converged within the two industries, with reactive companies following the proactive ones. Secondly, responses between the two industries increasingly diverge, with the power industry becoming much more proactive than the petroleum industry. The main explanation is found in the differing relevance of the two models and the wider regulatory context, particularly differing exposure to international competition and weak international climate agreements.     

用膨润土处理油田污水的研究进展

介绍了膨润土的基本特性及其存油田污水处理中的研究情况。天然膨润土经改性后,可吸附去除油田污水中的油、烃类衍生物、注聚残留聚合物及表面活性剂;负载金属氧化物的改性膨润土可对光催化氧化产生协同效应,提高光催化氧化油田污水中有机物的能力;在高压下将膨润土制成薄膜,对油田污水中的无机离了有一定的截留去除作用。     

盐效萃取法从电子产品清洗废液中回收异丙醇

用盐效萃取法从电子产品清洗废液中回收片丙醇,考察了碳酸钾水溶液与该清洗废液的质量比对脱水率的影响,测定了异丙醇-水-碳酸钾体系存40℃时的液液相平衡数据,用Pitzer理论和NRTL方程对液液相平衡数据进行了理论计算。结果表明：当质量分数为60．00％的碳酸钾水溶液与该废液的质晕比为2．00时,脱水率高达90．00％;将有机相进行精馏可得到质量分数为99．50％的异丙醇;计算值与实测值接近,水相和有机相的绝对平均偏差分别为0．62％和0．46％。     

化学混凝法去除稠油废水中的硅

以新疆油田稠油废水为研究对象,采用化学混凝除硅方法对稠油废水进行处理。实验结果表明:采用锌复合混凝剂的混凝、软化及镁剂除硅相结合的方法具有较好的除硅效果。确定了最佳除硅配方:NaOH的加入量为500~600mg/L,除硅剂MgCl2.6H2O的加入量为700~800mg/L,锌复合混凝剂加入量为100~150mg/L,处理后废水中SiO2的质量浓度小于50mg/L,达到热采锅炉的用水标准。     

从6-APA和7-ADCA生产废液中回收苯乙酸

采用溶剂萃取、水法提取等方法从6-氨基青霉烷酸和7-氨基-3-去乙酰氧基头孢烷酸生产废液（简称废液）中回收苯乙酸（PAA）,考察了各种因素对回收效果的影响。实验结果表明：以甲苯为萃取剂,在萃取温度30℃、萃取时间15m in、500mL废液中萃取剂加入量130mL的最佳条件下,萃取率为96.5%;在提取温度为65℃左右、结晶温度低于10℃的条件下,PAA收率大于89%,纯度大于99%;所得PAA产品质量好,可用于青霉素G等医药产品的生产。