茂名石化炼油废水处理扩建一期工程A/O系统改O/O工艺运行探索

茂名石化炼油废水A/O系统改O/O工艺运行后,出水水质各项指标均达到国标和地标排放。为期两个月的工业试运行,为工艺操作与管理提供了经验和依据,同时也为二期工程的设计、施工和管理奠定了基础。     

用废催化剂作原料制CIM油脂氢化催化剂

介绍用废油脂氢化催化剂作原料,回收Cu2+-Ni2+液,再用此液作原料制CIM油脂氢化催化剂的工艺流程和制作方法。结果表明:其所制成的CIM催化剂的性能与用工业硫酸铜和硫酸镍为原料制的CIM催化剂的性能相同。     

查干淖尔生态治理恢复期鸟类调查分析

鸟类是自然环境好坏的重要指示物种。为了解查干淖尔生态治理后的环境效果,2014年8月采用实地调查、文献调查、访谈调查等方法对查干淖尔生态治理效果及其鸟类分布等进行了调查。结果表明,2008年＂查干淖尔干湖盆治理项目＂启动后,鸟类数量逐年增加,查干淖尔生态环境逐步得以恢复。调查期间,共记录到鸟类112种,隶属于17目32科。     

Implementation of Waste Electrical and Electronic Equipment Directive in Finland: Evaluation of the collection network and challenges of the effective WEEE management

Further to the European Waste Electrical and Electronic Equipment (WEEE) Directive, setting up efficient collection schemes is necessary to ensure the recovery targets set. Following the subsidiary principle, the WEEE Directive defines only the general requirements for mandatory collection and recycling objectives. The modalities of the logistics and the organisation of the take-back schemes are left to the choice of Member States. In this paper, the implementation of the WEEE Directive and the development of the WEEE recovery infrastructure in Finland are described and the challenges to the effective management of the WEEE recovery system in Finland are expressed. It can be said that the implementation of the WEEE Directive has succeeded in Finland and, at the same time, the legislative basis has been enacted. In addition, a functional WEEE recovery infrastructure has been built and, the collection requirements of the WEEE Directive have been exceeded in a relatively short time. However, the paper outlines that some inefficient practices still exist, particularly in the registration and WEEE collection stages. It is concluded that raising awareness would lead to a more environmentally sound behaviour and would, ultimately, improve WEEE recovery efficiency.     

Mechanical recycling of EOL concrete into high-grade aggregates

Recycling End of Life (EOL) concrete into high-grade aggregate for new concrete is a challenging prospect for the building sector because of the competing constraints of low recycling process cost and high aggregate product quality. A further complicating factor is that, from the perspective of the environment, there is a strong societal drive to reduce bulk transport of building materials in urban environments, and to apply more in situ recycling technologies for Construction & Demolition Waste. The European C2CA project investigates a combination of smart demolition, grinding of the crushed concrete in an autogenous mill to increase the liberation of cement mortar from the surface of aggregates and a novel dry classification technology called ADR to remove the fines. The feasibility of this recycling process was examined in a demonstration project involving 20,000 tons of EOL concrete from two office towers in Groningen, the Netherlands. Results show that the +4 mm recycled aggregate compares favorably with natural aggregate in terms of workability and the compressive strength of the new concrete, showing 30% higher strength after 7 days.     

Evaluating the potential of biodiesel (via recycled cooking oil) use in Singapore,an urban city

Singapore has pledged to attain 7–11% Business-As-Usual carbon emissions reduction by 2020. About 19% of CO₂ contribution stemmed from road transport in 2005. Commercial vehicles, which uses mainly diesel, consumed 695 million litres diesel in 2012. An estimated 115,585 tonnes or 127 million litres cooking oils (derived from seeds/fruits) were consumed in 2010, in which the bulk of used cooking oil is re-incorporated into the food preparation process while only a small amount is being recycled into biodiesel or disposed into the sewerage. Nevertheless, the present research reveals that biodiesel derived from spent cooking oil has potential to be a viable fuel supplement. Surveys were carried out involving three market segments – suppliers, processors and end-users – to identify the barriers and obstacles in mass production of biodiesel. A key enabler of biodiesel as a fuel supplement towards a greener environment lies in government mandate/policies in promoting greater biodiesel usage.     

Material flow analysis of lubricating oil use in California

Petroleum lubricating oils, used throughout the economy, are distinct among petroleum products in their capacity to be recovered and recycled at the end of their useful life. Used lubricating oil is regulated at the state and federal level because of concerns about environmental impacts arising from improper disposal, although rates of recovery are not known. We present a material flow analysis of lubricants through California's economy in the years 2007–2012. We introduce a novel technique for computing aggregate waste generation from a collection of hazardous waste manifest records, and apply it in order to determine a recovery rate for used oil and to estimate the quantity of oil managed informally in the state. The records also offer a detailed view of the fate of used oils after they are recovered. We find that around 62% of lubricants are recoverable at end of life, of which 70–80% is being recovered. This rate shows a slight downward trend. If the trend is accurate, measures should be taken to improve the performance of the used oil management system. Policy opportunities exist to reduce the quantity of oil managed informally through improving access to responsible used oil management methods. These include increasing the collection of used oil from industrial sources as well as “do it yourself” oil changes, expanding in-state reprocessing capacity, and promoting increased out-of-state reprocessing of used oil. Our methods introduce new possibilities to make use of direct observation in material flow analysis, potentially improving data availability and quality and increasing the relevance of material flow methods in policy applications.     

油料作物对土壤老化残留DDT的吸收积累

油料作物对亲脂性DDT的吸收富集能力是否会更强是一个值得研究的问题。采用DDT老化残留土壤,温室盆栽油料作物花生(Arachishypogaea),大豆(Glycinemax)和芝麻(Sesamumindicum)。果实成熟后将植株分成根、茎、果壳和果仁四部分,GC-ECD测定各部位中的DDT浓度。研究了油料作物对土壤老化残留DDT的吸收积累情况,结果表明,∑DDT在三种作物不同部位中的浓度顺序都是:根>茎>果壳>果仁。含油量高的花生果仁和芝麻果仁中∑DDT浓度都明显高于大豆果仁的∑DDT浓度,这种差异有可能是由果仁含油量的差异造成的。单株植物吸收积累∑DDT的总量顺序为:花生>芝麻>大豆。花生、大豆和芝麻三种作物的根和茎的生物富集系数都比较高,特别是花生的,说明这三种油料作物根部从土壤中吸收积累老化残留DDT的能力以及从根部向茎部运输DDT的能力都是相当强的。     

西南部分地区麻疯树种子油的理化性质及脂肪酸组成分析

从西南6个地区采集了麻疯树种子并分析比较了其生物学性状和种子油的理化性质及脂肪酸组成.所有样品的百粒重范围为41.80~71.39g,出仁率60.02%~81.43%,种仁含油率51.76%~57.93%,种子含油率31.07%~47.17%,不饱和脂肪酸含量74.89%~79.68%.其中永胜产麻疯树的种子品质最好,其出仁率为81.43%,种仁含油率57.93%,种子含油率47.17%,不饱和脂肪酸含量79.68%.攀枝花和宁南产麻疯树的种子品质次之.双柏和罗甸麻疯树的种子油酸值为0.81,在所有样品(0.81~9.46)中最低.对麻疯树种子及种子油性质的相关数据进行方差分析,结果表明,产地不同,麻疯树种子的生物学性质、种子油理化性质和脂肪酸组成都有一些差异.图2表3参18     

Fe2+EDTA溶液络合-铁还原脱除烟气中NO

提出了“Fe2 螯合剂络合-铁粉还原-酸吸收”回收法脱除烟气中NO的新工艺,重点研究了模拟烟气中O2体积分数对NO络合量的影响,以及铁粉用量、铁粉粒径、搅拌速度对NO脱除效率的影响,确定了最佳的铁粉脱氮工艺条件,并对铁粉和铁屑的脱氮效果进行了比较。结果表明,烟气中O2的体积分数从0%增加到4.2%,NO络合量下降90.2%;NO脱除效率随铁粉用量和反应器搅拌速度的增加而增加,随铁粉粒径的增加而降低;过程的最佳工艺参数为,铁粉用量0.8g,铁粉粒径≤0.077mm,搅拌速度900r·min-1,在此条件下,对O2体积分数为5%的模拟烟气在搅拌反应器中可取得90%以上的NO脱除效率;用铁粉在1台搅拌反应器中取得的NO脱除效率和用铁屑在2个鼓泡反应器串联时所取得的效率相当。