聚二乙烯基苯功能化纺织布用于快速油水分离的研究

面对日趋严重的海洋漏油事故及工业含油废水排放问题,本研究提出了一种基于聚二乙烯基苯（PDVB）的超疏水纺织布制备方法,将二乙烯基苯单体在纺织布纤维上聚合生长,形成超疏水涂层,用于快速油水分离.结果表明,制备的纺织布具有优异的超疏水性,水接触角为155°,对不同油/水混合物的分离效率均高于97%,渗透通量达3077 L·m^-2·h^-1.在砂纸磨损40次、超声处理60 min和不同溶剂浸泡实验中依旧维持超疏水性.研究表明,该超疏水纺织布的制备方法高效、简单、环保、成本低,适合大规模生产,所制备的超疏水超亲油的纺织布是用于溢油清理和工业含油废水处理的非常有前途的材料.     

Pyrolysis behaviors of oil sludge based on TG/FTIR and PY-GC/MS

Pyrolysis is an alternative technology for oil sludge treatment. Thermogravimetric Analysis-Fourier Transform Infrared Spectroscopy and Pyrolysis-Gas Chromatography/Mass Spectrometry were employed to investigate the pyrolysis process and products of oil sludge. The pyrolysis process was divided into five stages: drying and gas desorption, oil volatilization, main pyrolysis, semi-coke charring, and mineral decomposition. The main reaction temperatures ranged from 497.6 K to 753.2 K. The products were mainly composed of pairs of alkane and alkene (carbon number ranges from 1 to 27). The mechanisms consisted of random chain scission followed by end chain scission at high temperatures with volatilization occurring during the whole process. This study is useful not only for the proper design of a pyrolysis system, but also for improving the utilization of liquid oil products.     

储油条件下拱顶油罐的油气爆炸实验

为研究储油条件下拱顶油罐油气爆炸的发展过程,设计了中尺度拱顶油罐油气爆炸实验台架,并完成了储油条件下油罐油气爆炸试验。实验结果表明:储油条件下油气爆炸会导致罐顶破坏,超压发展分为多个阶段,并出现强烈的超压振荡和二次爆炸现象,最大超压由二次爆炸所产生;爆炸最大超压随着初始油气体积分数的降低而升高;在储油条件下,油罐油气爆炸后会诱导产生二次爆炸现象,第2次爆炸超压峰值和升压速率均远大于第1次爆炸的数值,且二次爆炸对外场的影响更加明显;火焰强度随时间的变化曲线具有2个明显的峰值,其形成原因分别为第1次爆炸和第2次爆炸。     

油气管道本质安全影响因素分析及启示

管道运输是油气运输的主要方式,为了研究油气管道本质安全的影响因素和薄弱环节,通过分析美国和加拿大油气管道的事故原因,识别了3种影响因素和7个薄弱环节;通过统计管道工程各阶段的事故和影响因素的数量,分析了每个阶段存在的本质安全问题。结果表明:施工阶段的事故和影响因素的数量远多于其他阶段;施工和制管阶段的影响因素种类多,事故原因分散,本质安全提升难度较大;设计和运营阶段的影响因素种类少,事故原因相对集中,本质安全提升难度相对不大;各阶段都存在技术和管理的不足。根据油气管道本质安全影响因素分析结果,得出管道本质安全5个方面的启示。     

基于SVM的CO2驱油藏输油管道脆弱性评价研究

CO2驱油在全国范围内的广泛开展导致内外扰动对输油管道的威胁大大增加,为指导企业发现输油管道的薄弱点从而预防事故发生,提出CO2驱油藏输油管道脆弱性概念及研究思路。将脆弱性分为5个等级并确定各级脆弱性的取值范围。深入分析脆弱性要素,从致灾因子、承灾体和灾害响应3个方面建立脆弱性评价指标体系,并确定各等级脆弱性对应的指标范围。利用MATLAB R2013a的SVM回归方法,构建脆弱性评价模型并进行实例应用。结果表明:模型训练的输出与期望输出拟合较好,均方误差为9.98052×10-7;训练好的SVM模型具有较强的泛化能力和较高的准确性,其对检验样本脆弱性进行预测的最大相对误差为0.027。利用模型得到研究区域某输油管道的脆弱性值为0.381,其脆弱性程度为不太脆弱。     

基于资源价值折耗的石油资源账户建立与分析——以黄河三角洲石油开发为例

在国际上通行的环境经济综合核算体系(SEEA)的基础上,以黄河三角洲石油资源开发为研究案例,根据黄河三角洲2003-2008年石油开发利用等数据,经过计算和统计依次建立了石油资源的实物型账户、价值型账户和综合账户。计算和统计结果表明:2003-2008年,黄河三角洲石油资源因开采而造成的价值折耗分别为154.0×10⁸、111.3×10⁸、121.6×10⁸、104.9×10⁸、106.0×10⁸、83.0×10⁸元,考虑了资源价值折耗的石油行业增加值占工业增加值和地区GDP的比例,以及因价值折耗造成的工业经济和地区GDP损失比例都有减小的趋势,平均分别为59.1%和42.0%,以及14.3%和9.8%。巨大的价值折耗带来了石油资源利用的可持续性下降,但是在当地的整体经济中,黄河三角洲石油开发带来的经济增长的可持续性在一定程度上增强。最后对结果进行了分析和讨论。     

淬火油泥的热解动力学分析及协同作用研究

采用热重差热分析法和傅里叶变换红外光谱分析联用的方法（TG-FTIR）研究淬火油泥（QOS）的热解过程,解析了热解过程的动力学特性,分析了其中的矿物油（MO）和残渣（SR）在QOS热解过程中的相互作用。实验结果表明：QOS热解过程包含油分热解阶段和矿物质分解阶段;低温段热解温度为150~520 ℃,高温段热解温度为800~980 ℃;SR的热解过程分为油分热解反应和残渣中Fe₂O₃的还原反应;MO的热解过程只有轻质油分的挥发和重质油分的热解。FTIR表征结果显示：QOS热解过程析出的气体主要为CO₂、CO和有机化合物;SR热解过程中CO₂的特征峰强度高于其他气体的特征峰强度;MO热解过程中烷烃的特征峰强度高于其他气体的特征峰强度,且MO主要以轻质油分为主。在QOS的热解过程中,初温~480 ℃时,SR所含的Fe₂O₃对MO的热解起促进作用,300 ℃左右时促进效果最明显。     

Storage stability of biocrude oils from fast pyrolysis of poultry litter

The unstable nature of biocrude oils produced from conventional pyrolysis of biomass is one of the properties that limits its application. In the disposal of poultry litter via pyrolysis technology, the biocrude oil produced as a value-added product can be used for on farm applications. In this study, we investigated the influence of bedding material (wood shavings) on the storage stability of biocrude oils produced from the fast pyrolysis of poultry litter. The biocrude oils produced from manure, wood (pine and oak), and mixtures of manure and wood in proportions (75:25 50:50, and 25:75 w/w%) were stored under ambient conditions in sealed glass vials for a period of 6 months and their stability were monitored by measuring the changes in viscosity over time. The manure oil had the lowest rate of viscosity change and thus was relatively the most stable and the oils from the 50:50 w/w% litter mixtures were the least stable. The rate of viscosity change of the manure biocrude oil was 1.33 cP/day and that of the 50/50 litter mixture was 7.6 cP/day for pine and 4.17 cP/day for oak.The spectrometric analyses of the biocrude oils showed that the presence of highly reactive oxygenated functionalities in the oil were responsible for the instability characteristic of the litter biocrude oils. The poor stability of the biocrude oil from the 50:50 w/w% litter mixtures was attributed to reactions between nitrogenous compounds (amides) from protein degradation and oxygenated compounds from the decomposition of polysaccharides and lignin. The addition of 10% methanol and 10% ethanol to the oil from 50% manure and 50% pine reduced the initial viscosity of the oil and was also beneficial in slowing down the rate of viscosity change during storage.     

氮气气提法去除油田废水中的H2S

以氮气为载气,采用气提法去除油田废水中的H2S.实验结果表明,氮气气提法去除油田废水中的H2S效果显著,在水浴温度为45℃、氮气流量为3 L/min、通气时间为30min、油田废水pH为5.0的条件下,废水中H2S的去除率可达98％以上,升高水浴温度和降低废水中的含油量有助于提高H2S去除率.经氮气气提法处理后废水pH提高到7.5,碳钢的腐蚀速率降至0.02 mm/a,废水达到SY/T5329-1994《碎屑岩油藏注水水质推荐指标及分析方法》的指标.     

润滑油降解菌的分离、鉴定及降解特性

以HVI 500润滑油为唯一碳源进行选择性富集培养,从油污染土壤中筛选出3株菌,分别命名为SN0901,SN0902和SN0903. 采用重铬酸钾法测定含HVI 500润滑油培养液的ρ(COD_Cr),用以评价分离菌对润滑油的降解能力. 结果表明,由于润滑油降解而使培养液ρ(COD_Cr)降低,即3株菌均为HVI 500润滑油降解菌. 根据形态学观察、生理生化试验和16S rDNA基因序列比对分析,初步确定3株菌分别属于假单胞菌属(Pseudomonas)、苍白杆菌属(Ochrobactrum)和博德特氏菌属(Bordetella). 采用倾注平板法对不同温度下降解菌的菌落计数,采用重铬酸钾法测定不同pH下培养液的ρ(COD_Cr). 结果显示,温度和pH对菌株降解作用影响显著,3株菌最适宜的降解温度为30～34 ℃,pH为6.0～7.8,但每株菌的最适宜降解温度和pH稍有不同.