酸性矿山废水的处理研究

简要分析了酸性矿山废水的主要污染物及危害,叙述了几种主要的处理技术:中和法、硫化沉淀浮选法、微生物法和人工湿地,并介绍了它们的机理、特点及实验研究和工业应用情况,由此对我国的酸性矿山废水的治理技术进行了前景展望。     

车门框条滚压成形工艺及滚压线设计

以X110型车门为例,分析零件工艺性,介绍滚压成形工艺过程,强调在模具设计和制作中应注意的问题。设计由滚压、校正、滚焊和自动断料等工艺流程组成的滚压线,可作为类似滚压工艺参考。     

SBR工艺处理维生素C废水试验研究

采用颗粒污泥和普通絮体污泥SBR反应器对维生素C生产废水进行可生化性对比试验研究，结果表明，在进水CODcr为400—1800mg／L，运行周期为8h，其中曝气时间为5．5h，换水比为80％的条件下，颗粒污泥反应器CODer去除率为75-90％，污泥浓度介于6．11～8．32g／L，污泥指数为20～40mL／g.     

Decomplexation of Cu-1-hydroxyethylidene-1,1-diphosphonic acid by a three-dimensional electrolysis system with activated biochar as particle electrodes

The feasibility of decomplexation removal of typical contaminants in electroplating wastewater, complexed Cu(II) with 1-hydroxyethylidene-1,1-diphosphonic acid (Cu-HEDP), was first performed by a three-dimensional electric reactor with activated biochar as particle electrodes. For the case of 50 mg/L Cu-HEDP, Cu(II) removal (90.7%) and PO initial pH 7, acid-treated almond shell biochar (AASB) addition 20 g/L, and reaction time 180 min, with second-order rate constants of 1.10 × 10⁻³ and 1.94 × 10⁻⁵ min⁻¹respectively. The growing chelating effect between Cu(II) and HEDP and the comprehensive actions of adsorptive accumulation, direct and indirect oxidation given by particle electrodes accounted for the enhanced removal of Cu-HEDP, even though the mineralization of HEDP was mainly dependent on anode oxidation. The performance attenuation of AASB particle electrodes was ascribed to the excessive consumption of oxygen-containing functionalities during the reaction, especially acidic carboxylic groups and quinones on particle electrodes, which decreased from 446.74 to 291.48 µmol/g, and 377.55 to 247.71 µmol/g, respectively. Based on the determination of adsorption behavior and indirect electrochemical oxidation mediated by in situ electrogenerated H₂O₂ and reactive oxygen species (e.g., •OH), a possible removal mechanism of Cu-HEDP by three-dimensional electrolysis was further proposed.     

用废催化剂作原料制CIM油脂氢化催化剂

介绍用废油脂氢化催化剂作原料,回收Cu2+-Ni2+液,再用此液作原料制CIM油脂氢化催化剂的工艺流程和制作方法。结果表明:其所制成的CIM催化剂的性能与用工业硫酸铜和硫酸镍为原料制的CIM催化剂的性能相同。     

利用废渣废碱液年产3000t粒状五水偏硅酸钠工艺初步设计

介绍以铝矾土提取硫酸铝废渣和氧氯化锆副产废碱液为原料生产泡花碱 ,然后利用一次造粒法生产五水偏硅酸钠新工艺确定影响产品质量指标工艺因素。小试试验产品质量指标达到HG/T2 5 6 8- 94要求 ,工艺成本低 ,避免废碱液及废渣排放对环境的污染。     

城市污水处理厂工艺和自控系统

归纳了城市生化污水处理厂工艺、自控系统的构成和作用，具体分析了沈阳市北部污水处理厂自控系统     

生物氧化塔的应用

介绍了生物氧化培处理含油污水的装置运行情况．大量数据说明该塔具有操作弹性大，适用范围广，能耗低，脱除率高，不外排过剩的活性污泥等特点，具有广阔的推广应用前景。     

Mn-Cu-O负载型催化剂上CO氧化性能的研究

研究了ＺｒＯ２或Ａｌ２Ｏ３负载Ｍｎ－Ｃｕ－Ｏ体系催化剂ＣＯ催化氧化活性，以及物相结构，表面氧性能与活性的关系。结果表明，锆基催化剂的氧化活性明显优于铝基催化剂，起燃温度Ｔ５０低达５０℃，ＺｒＯ２载 利于活性组份形成高活性物相，并促进表面吸附氧的脱附，表现出催化剂表面吸附氧的脱附温度高低次序与其氧化活性有一致的对应关系。     

预防水体黑臭的水质指标研究

水体黑臭的指标，是研究其成因，判断其黑芨科学合理地管理水体的重要内容，该文选择了与一黑臭生化过程有关的的一些参数，进行了理场和模拟试验测定研究，结果证明ＤＯ、ＢＯＤ５、硫酸还原菌数等，与水体黑臭具有较好的相关性。水体黑臭与不黑臭的临界指标为：ＣＨ－２１．５，ＤＯ＝１．８ｍｇ／Ｌ，Ｎ＝２０００个／ｍｌ，ＢＯＤ５＝１４ｍｇ／Ｌ。