BUILDUP,WASHOFF, AND EVENT MEAN CONCENTRATIONS1

ABSTRACT: Most watershed water quality simulation models require the user to specify pollutant buildup and washoff rate parameters for pollutants, by land use. Buildup and washoff rates are difficult to measure directly, and only limited guidance and few observed data are available from the literature. Many studies, however, report storm event mean concentrations (EMCs). These EMCs must arise as a result of the buildup and washoff processes, but typically represent the net contribution from a variety of pervious and impervious surfaces. This paper explores the relationship between EMCs and buildup/washoff parameters. An assumption of the mathematical form of the buildup/washoff relationship gives an algebraic expression for the EMC consistent with model assumptions. This yields techniques to separate observed EMCs into contributions from different land uses and from pervious and impervious surfaces. Given this relationship, numerical optimization may be used to estimate site specific values of buildup and washoff parameters from observed storm EMCs for use in modeling. Use of this approach helps ensure that model parameters are consistent with observed data, providing a rational starting point for final model calibration. Several site examples demonstrate use of the method.     

Evidence for biodegradation and volatilisation of dissolved petroleum hydrocarbons during in situ air sparging in large laboratory columns

Laboratory column experiments run for up to 13 days compared air sparging of groundwater contaminated by dissolved petroleum hydrocarbons in sterile and non-sterile aquifer sediments as well as uncontaminated sediments and groundwater. Loss of dissolved BTEX compounds in the contaminated columns was very rapid, occurring through volatilisation. The majority of the dissolved total organic carbon (TOC) persisted for much longer periods however. A direct comparison between losses from sterile and non-sterile columns suggested a negligible contribution of biodegradation to the removal of TOC. This was difficult to confirm through examination of O₂ utilisation because oxidation of a small amount of reduced sulphur in the aquifer materials was the dominant sink for O₂. Despite this, it was possible to conclude that less than 22% of the removal of TOC was through biodegradation during the first three days of air sparging.     

石油开发废水中氯化物的测定──氯离子选择电极法

用氯离子选择电极法测定油田废水中氯化物是一种新方法。通过电极响应平衡速度试验、干扰消除试验、方法适应性试验等，探讨了温度对能斯特斜率的影响；ＰＨ对测定值的影响；总离子强度调节缓冲溶液（ＴＩＳＡＢ）的选择。本方法分析速度快，测定浓度范围宽，操作简便，成本低，值得推广。     

我国石油工业环境保护相关法律问题

目前,我国对石油工业领域环境保护立法,采取的是特殊行业规制与一般规制相结合的模式。总体上看,我国石油工业环境保护领域已建立起初步的法制框架,但仍须进一步完善立法、执法、制订应急预案和建立信息公开机制等。     

回转窑煅烧石油焦清洁生产方案研究

在回转窑煅烧石油焦的过程中,大量的高温烟气和比较严重的粉尘是污染环境的主要因素。文章以清洁生产理论为依据,综合论述了回转窑煅烧石油焦全过程,并对污染处理和资源、能源综合利用等方案进行了研究。在我国,比较成熟的清洁生产技术是采用余热回收蒸汽和袋式除尘技术。回转窑产能大,机械化程度较高,投资少,建设速度快,所产生的污染物易控制,维修费用低,换料容易,是大规模煅烧焦厂家应优先采用的石油焦煅烧设备。     

美国油气开发钻井废物排放管理法规浅析

钻井是石油天然气勘探开发过程中的重要环节,钻井过程中污染物的排放管理也受到各国普遍的重视。对钻井污染物的特点进行了分析,在此基础上概括地介绍了美国的相关环境管理法规体系。重点论述了与钻井排污有关的资源保护与补偿法、安全饮用水法、清洁水法等,总结了可供我国借鉴的若干法规、标准制定的理念和方法。     

环评中锅炉房大气污染源强的确定

在环境评价中,污染源强的确定对环境影响因素评价的分析结果有重要作用。对锅炉房污染物排放的分析表明,影响锅炉房大气污染物的主要因素有燃料的构成、发热量和燃烧方式等。确定锅炉房大气污染物的方法主要有物料衡算法、实测法和经验系数法。在这三种方法中,物料衡算法被普遍采用。在确定锅炉房大气污染物的排放量时,也可以采用物料衡算法和实测法相结合的方法。     

浅析国际环境公约对石油工业的影响

随着人类环境意识、资源意识的不断深化,越来越多的国家签署了国际环境公约。中国石油企业若要进一步参与国际化竞争,在环境保护方面就势必面临更大的挑战与压力。对气候变化框架公约、巴塞尔公约、湿地公约、海洋环境保护公约以及酸雨问题等与石油工业相关的国际环境公约进行了分析及探讨,以期为石油工业适应环境保护工作发展的需要及提高国际竞争力制定相应对策提供参考。     

红外光度法测定石油类和动植物油常见问题探讨

根据石油类在波数为2930cm-1、2960 cm-1、3030 cm-1全部或部分谱带处有物征吸收的原理,采用红外光度测油仪和水样絮凝富集技术测定石油类、动植物油。     

石油天然气钻探过程中硫化氢的监测

石油天然气钻探过程中硫化氢的准确监测是确保钻井安全的条件。在介绍硫化氢气体的性质、危害的基础上具体阐述了现场常用硫化氢监测方法。对现行井场硫化氢监测问题进行了探讨，提出了硫化氢监测应从监测地面气体向监测地层流延伸，硫化氢报警内容应多样化的建议。