异质结型SnO2-TiO2纳米纤维光催化降解柴油机多环芳烃

采用同轴静电纺丝法制备了SnO_2-TiO_2纳米纤维,用X射线衍射仪(XRD)、扫描电子显微镜(SEM)、红外光谱仪(FTIR)和紫外-可见光谱能谱仪(UV-Vis),表征了SnO_2-TiO_2纳米纤维相组成和微观形貌,评价了催化剂表面化学形态和吸光特性,研究了SnO_2含量、光源条件、温度和催化稳定性对降解萘污染物的影响规律.结果表明,催化剂Sn25对萘降解效率最高.在暗光、可见光和紫外光条件下,萘降解效率分别为13.8%、37%和98%.Sn25对萘降解稳定率(标准差率)为0.36%.利用催化剂Sn25对柴油机尾气中多环芳烃(PAHs)排放污染物光催化降解应用发现,Sn25对低苯环PAHs、中苯环PAHs和高苯环PAHs的平均催化降解效率分别为80.2%、75.4%和60.2%.表明SnO_2-TiO_2纳米纤维具有较强光催化降解多环芳烃污染物能力.     

混晶纳米TiO_2的制备及其光催化降解有毒有机污染物

以无定形TiO2沉淀为前驱体,在水热条件下得到了含板钛矿(121)相混晶纳米TiO2,考察了水热反应的温度和时间等因素对含板钛矿型TiO2光催化活性的影响.采用XRD、TEM对制备的TiO2进行初步表征,并结合光催化(λ≤387 nm)降解有机染料的光活性探针反应.结果表明,水热温度为150℃,时间为24 h时,可制得具有较高光催化活性的纳米TiO2,其纳米尺寸为14.20 nm,板钛矿相含量63.6%,锐钛矿含量为36.4%.光催化实验中跟踪研究了其对染料酸性桃红(sulforhodmineB,SRB)的褪色及2,4-DCP的降解情况,并对降解中间产物H2 O2、.OH进行跟踪测定,实验结果表明板钛矿相混晶TiO2的光催化主要涉及.OH氧化历程,光照射9 h对SRB和2,4-DCP的矿化氧化分别达到89%和78%,循环5次光催化降解SRB实验,催化剂表现出较好的稳定性,催化性能无明显变化.     

N掺杂TiO_2光催化还原地下水中硝酸盐

以硫酸钛为前驱体,采用水热沉淀法制备TiO2光催化剂,采用扫描电子显微镜(SEM)、X-射线能谱(EDS)、X-射线衍射(XRD)、傅立叶红外光谱仪(FTIR)和光电子能谱仪(XPS)进行表征和分析,考察了硫酸钛浓度、焙烧温度对光催化还原水中硝酸盐活性的影响.结果表明,制备的催化剂为掺杂N的锐钛矿型TiO2.硫酸钛浓度为0.5mol.L-1、焙烧温度为400℃时制备的催化剂活性最佳,反应120min后,硝酸盐转化率为95.8%,中间产物NO--N浓度为0.17mg·mL-1,副产物NH+-N浓度为1.52mg·mL-1.     

Photocatalytic degradation of methyl orange over ITO/CdS/ZnO interface composite films

ITO/CdS/ZnO interface composite films were successfully prepared by subsequent electrodeposition of CdS and ZnO onto indium tin oxide (ITO) glass substrates. The obtained ITO/CdS/ZnO composite films were characterized with X-ray diffraction (XRD), scanning electron microscopy (SEM), and UV-Vis spectroscopy. The photocatalytic activity of ITO/CdS/ZnO composite films were investigated using methyl orange (MO) as a model organic compound under UV light irradiation. The influence of operating parameters on MO degradation including initial concentration of MO, pH value of solution, and inorganic anion species over the composite films were examined. A blue shift of absorption threshold was observed for the ITO/CdS/ZnO film in comparison with ITO/ZnO film. ITO/CdS/ZnO composite films prepared under specific conditions showed a higher photocatalytic activity than that of ITO/ZnO films. It was also found that the photocatalytic degradation of MO on the composite filing followed pseudo-first order kinetics.     

高度有序的TiO2纳米管阵列光催化性能研究

采用恒压阳极氧化法在纯钛箔表面制备TiO2纳米管阵列,利用SEM和XRD对其进行了形貌和晶型的分析和表征,并通过TiO2纳米管阵列膜对甲基橙光催化降解,探讨光照时间、甲基橙溶液的初始浓度、溶液的初始pH值和H2O2加入浓度等因素对甲基橙的脱色率影响.结果表明,H2O2加入浓度为50mg·L-1,紫外光照射2h,溶液为中性时,在30 mg·L-1的甲基橙溶液(50mL)中,甲基橙溶液的脱色率达到100%.当H2O2加入浓度进一步增大到100 mg·L-1时,光催化的效率进一步提高,紫外光照射1h,甲基橙溶液的脱色率就已经达到了100%,并未出现抑制光催化的现象.同时还研究了TiO2纳米管阵列电极的稳定性.实验结果表明,随着TiO2纳米管阵列使用次数的增加,其光催化效果略有所下降.     

镧掺杂氧化锌光催化降解染料废水研究

以醋酸锌和硝酸镧为原料,丙烯酰胺为单体,N,N’-亚甲基双丙烯酰胺为网络剂,过硫酸铵为引发剂,采用高分子网络凝胶法制备得到掺镧的Zn O纳米粉体。用制备的粉体对甲基橙进行光催化降解实验,考察了掺镧量对其光催化性能的影响。用X射线衍射仪、高分辨率透射电镜、X射线能谱仪、比表面积与孔隙率分析仪等对其进行表征。结果表明,镧的掺入提高了Zn O的光催化活性,镧锌摩尔质量比为0.2%时光催化性能最好,高压汞灯下反应1 h,甲基橙的脱色率为96.5%,相比于未掺杂的Zn O提高了11.5%。     

Endurance time,muscular activity and the hand/arm tremor for different exertion forces of holding

This study aimed to examine the effects of exertion force on endurance time, muscular activity and hand/arm tremor during holding. Fifteen healthy young males were recruited as participants. The independent variable was exertion force (20%, 40%, 60% and 80% maximum holding capacity). The dependent variables were endurance time, muscular activity and hand/arm tremor. The results showed that endurance time decreased with exertion force while muscular activity and hand/arm tremor increased with exertion force. Hand/arm tremor increased with holding time. Endurance time of 40%, 60% and 80% maximum holding capacity was approximately 22.7%, 12.0% and 5.6% of that of 20% maximum holding capacity, respectively. The rms (root mean square) acceleration of hand/arm tremor of the final phase of holding was 2.27-, 1.33-, 1.20- and 1.73-fold of that of the initial phase of holding for 20%, 40%, 60% and 80% maximum holding capacity, respectively.     

RGO/TiO2光催化降解2,4-二氯苯氧乙酸研究

通过Hummers法及紫外光/热还原工艺制得还原氧化石墨烯(RGO),采用溶胶-凝胶-煅烧法,以RGO和钛酸酊脂为前驱体制备出RGO/TiO2光催化复合材料,并利用XRD、FT-IR等对其进行了表征.对RGO/TiO2光催化降解性能的研究发现,复合光催化剂RGO/TiO2对2,4-二氯苯氧乙酸(2,4-D)的光催化降解活性显著优于纯TiO2,并且发现负载量和pH值对光催化降解性能有较大的影响:RGO/TiO2投加量为1.2g·L~(-1)、RGO负载量2%、pH为3、初始浓度为50 mg·L~(-1)反应12 h,2,4-D去除率达到98.75%;2,4-D降解率随着RGO/TiO2投加量的增大先增大后减小;RGO/TiO2对2,4-D的降解为脱氯还原和催化氧化过程,产生氯酚、苯酚等中间产物.     

光催化氧化技术降解水中双酚A的研究进展

目前环境雌激素双酚A(bisphenol A,BPA)所带来的危害已成为学术研究的热点问题。光催化氧化技术作为新兴的高级氧化技术,可快速降解水中双酚A。介绍了几种主要的光催化氧化技术降解双酚A的机理,并综述了国内外利用新型光催化剂在降解双酚A领域所取得的研究进展,为光催化氧化技术在双酚A降解领域的研究提供参考。     

重大冰雪灾害应急管理能力评价体系研究

深入分析了重大冰雪灾害应急管理能力评价体系的构建依据,提出了评价体系结构.首先根据全过程管理理论及系统论中的层次分析法,构造了重大冰雪灾害应急管理能力集,在此基础上结合冰雪灾害的特点提出了能力因素集.其次调研湖南省30位政府部门应急管理专家,根据专家意见最后确立重大冰雪灾害应急管理能力评价体系结构,为能力评价研究打下基...