Simulation investigations on the marble deterioration by sulphur dioxide

This paper deals with investigations on corrosion of marble SO2. We have simulated oxidation of SO2 by photochemical process in the atmosphere. The experiments indicate that formation of SO3 aerosols is related to the concentration of SO2, the UV light intensity, the time of irradiation and the humidity of the air. The corrosion feature of surfaces of the marble and the depth profiles of sulphur were obtained by SEM (Scanning electron microscope), EDXA (Energy-dispersive X-ray analyzer) and SIMS (Secondary ion mass spectrometer). The results of experiments show the corrosive extent of marble depends on its compositions and microareas of marble, which contain lower silicon content can be easily corroded by SO2.     

简化活性污泥数学模型的优化

为了从控制运行的角度促进简化数学模型的应用，必须借助其它优化手段进一步提高预测精度。本文主要介绍了应用于简化数学模型的扩展卡尔曼滤波、神经网络和误差反馈系统三种优化方法以及优化后的验证结果。从验证结果来看，优化的ROM模型与ASMl模型的定性变化行为相似，基于神经网络的复合模型对PO4^3-和NOx^-的预测结果非常准确，误差反馈的优化系统模拟性能良好。     

岳阳南湖水质变化趋势与保护措施研究

应用湖泊完全混合模型和狄龙模型，预测了岳阳经济技术开发区和南湖旅游度假区建成后对有水质的影响，结果表明南湖水质污染将会加剧。根据南湖污染源的情况，文中提出了相应的水质保护措施。     

Numerical integration of chemical ODE problems arising in air pollution models

The numerical treatment of a regional air pollution model (such models are, as a rule, described mathematically by systems of partial differential equations) leads to the solution of very large computational problems. The chemical submodel of an air pollution model is normally the most timeconsuming part of the computational work. The application of appropriate discretization and splitting procedures reduces the chemical submodel to a large number of relatively small ODE systems (one such system per gridpoint). In the process of searching for efficient numerical algorithms for the chemical submodels one can carry out experiments by using only one such ODE system in order to facilitate the work. This approach has been used in connection with a particular chemical scheme, the condensed CBM IV scheme, which is used in several large air pollution models. Six integration algorithms have been tested on a set of typical scenarios (consisting of different starting concentrations and/or of different values of the emissions). The advantages and the disadvantages of the algorithms tested are discussed. The final decision about the most efficient algorithm, among the algorithms tested, should be made after a second series of experiments. The coupling of the chemical process with the transport of air pollution (on, at least, a twodimensional domain) together with the application of highspeed computers has to be studied in the second series of experiments, which will be performed in a subsequent paper.     

Counterpart Models in Facility Location Science and Reserve Selection Science

Five classes of zero–one programming models for discrete facility location problems are compared to counterpart models for the selection of conservation reserves. The basic problem of siting facilities to cover demand for services is analogous to the problem of selecting reserves to support species diversity. The classes of models include the set covering and maximal covering models, as well as models for backup and redundant coverage. Issues of reliability and uncertainty are addressed by chance constrained covering models and maximal expected covering models. Exact and heuristic solution approaches are discussed. Multi-objective and economic issues are considered.     

Evaluating response surface designs for uncertainty analysis and prescriptive applications of a large-scale water quality model

Environmental models are often too large and cumbersome for effective use in regulatory decision making or in the characterization of uncertainty. This paper describes and compares four response surfaces that could complement a large-scale water quality model, the U.S. National Water Pollution Control Assessment Model (NWPCAM), in simulation and regulatory decision support applications. Results show that a physically based reduced-form model that exploits the mathematical structure of the underlying water quality model is a better predictor of policy-relevant outputs than the polynomial expansions that are frequently used in response surface studies.     

Circular business models: Babbling initial exploratory

This research aims to map Brazilian companies that have business models aligned with the concept of the circular economy. Data were collected for this study through use of a survey and additional research based on the survey results. Within these businesses’ models, an emphasis on the second use of materials as well as the marketing of the product as a service has been highlighted.     

网格化在TFT-LCD企业消防管理中的应用

本文以某TFT-LCD企业消防网格化实际情况为例,从网格生态构架、划分原则、信息平台建设以及培训和宣传等方面进行详细剖析,阐明在企业中如何进行消防网格化设计。通过模拟测试研究,结果表明:消防网格化的应用可以极大提高企业消防的反馈时间,但网格化在企业实际消防管理中存在非本网格员工相互推诿、拒绝配合消防工作、员工积极性不高等问题,针对问题提出措施建议,不断的优化消防网格化在企业中的应用,为企业的消防管理提供一种新思路。     

网格化管理对环境治理体系创新的研究

网格化管理能打破部门与职能边界,突破层级节制的组织结构,其精细化、责任化、规范化、高效化引发城市网格化管理热潮,但其管控性、封闭化、重行政化又备受质疑.网格化治理对网格化管理进行了探讨,对网格化的优缺点进行了扬弃,对网格化的吸纳治理理念,弱化管控思想进行了分析,对网格化在治理体系、治理主体、治理手段、治理过程上深度契合进行了探讨,坚决以党的十八届三中全会提出的治理现代化理念为中心,为子孙后代,为环境治理做出贡献.     

利用LUR模型模拟杭州市PM2.5质量浓度空间分布

模拟城市大气污染物浓度空间分布对研究城市空气质量及人体健康至关重要.本研究利用土地利用回归模型(Land Use Regression,LUR),提取包括污染点源因子、交通因子、人口因子、土地利用因子和气象因子等60个预测因子,基于地理加权算法(GWR)建立春、夏、秋、冬四个季节的模型,实现对杭州地区近地表PM_(2.5)质量浓度空间分布的预测.结果表明:基于地理加权回归算法时,检验模型的R2值分别达到0.76(春季)、0.70(夏季)、0.73(秋季)、0.76(冬季),模型能够解释PM_(2.5)浓度值80%以上的变异.每个季度杭州地区PM_(2.5)浓度变化不尽相同,但总体以杭州中部最高,西南部偏低.研究说明基于LUR模型模拟大尺度地区PM_(2.5)质量浓度空间分布是可行的.