浙江省危险废物和污泥处置现状及加强全过程监管工作的探讨

随着近几年经济发展水平的提高,浙江省的危险废物和污泥产生量呈不断增长趋势,它们的产生、贮存、转运和处置过程中的监管压力也逐年增大。总结了浙江省的危险废物产生现状,分析了存在的主要问题,对比了发达国家的相关管理经验,提出了进一步完善浙江省危险废物和污泥全过程监管工作的建议。     

CFD simulation of MSW combustion and SNCR in a commercial incinerator

A CFD scheme was presented for modeling municipal solid waste (MSW) combustion in a moving-grate incinerator, including the in-bed burning of solid wastes, the out-of-bed burnout of gaseous volatiles, and the selective non-catalytic reduction (SNCR) process between urea (CO(NH₂)₂) and NO_x. The in-bed calculations provided 2-D profiles of the gas–solid temperatures and the gas species concentrations along the bed length, which were then used as inlet conditions for the out-of-bed computations. The over-bed simulations provided the profiles of incident radiation heat flux on the top of bed. A 3-dimensional benchmark simulation was conducted with a 750 t/day commercial incinerator using the present coupling scheme incorporating with a reduced SNCR reduction mechanism. Numerical tests were performed to investigate the effects of operating parameters such as injection position, injection speed and the normalized stoichiometric ratio (NSR) on the SNCR performance. The simulation results showed that the distributions of gas velocity, temperature and NO_x concentration were highly non-uniform, which made the injection position one of the most sensitive operating parameters influencing the SNCR performance of moving grate incinerators. The simulation results also showed that multi-layer injections were needed to meet the EU2000 standard, and a NSR 1.5 was suggested as a compromise of a satisfactory NO_x reduction and reasonable NH₃ slip rates. This work provided useful guides to the design and operation of SNCR process in moving-grate incinerators.     

Stabilization of heavy metals in MSWI fly ash using silica fume

The objective of this work was to investigate the feasibility and effectiveness of silica fume on stabilizing heavy metals in municipal solid waste incineration (MSWI) fly ash. In addition to compressive strength measurements, hydrated pastes were characterized by X-ray diffraction (XRD), thermal-analyses (DTA/TG), and MAS NMR (²⁷Al and ²⁹Si) techniques. It was found that silica fume additions could effectively reduce the leaching of toxic heavy metals. At the addition of 20% silica fume, leaching concentrations for Cu, Pb and Zn of the hydrated paste cured for 7 days decreased from 0.32 mg/L to 0.05 mg/L, 40.99 mg/L to 4.40 mg/L, and 6.96 mg/L to 0.21 mg/L compared with the MSWI fly ash. After curing for 135 days, Cd and Pb in the leachates were not detected, while Cu and Zn concentrations decreased to 0.02 mg/L and 0.03 mg/L. The speciation of Pb and Cd by the modified version of the European Community Bureau of Reference (BCR) extractions showed that these metals converted into more stable state in hydrated pastes of MSWI fly ash in the presence of silica fume. Although exchangeable and weak-acid soluble fractions of Cu and Zn increased with hydration time, silica fume addition of 10% can satisfy the requirement of detoxification for heavy metals investigated in terms of the identification standard of hazardous waste of China.     

福州市城市生活垃圾管理体制与政策措施探讨

城市生活垃圾这个与城市“相伴生”的长期污染源,必须得到及时、科学、妥善的处理。福州市目前对城市生活垃圾的治理存在“重末端处理、轻源头控制”,在垃圾末端无害化上陷于被动,却缺少“清洁生产”的理念,“减量化、资源化”未得到应有的重视。本文针对福州市垃圾管理体制与政策上的弊端,强调垃圾的产生、收集、运输、处理等全过程实现全面的、综合的、封闭式管理,探讨法律、经济、管理三位一体的城市生活垃圾管理政策,保障城市可持续发展。     

The composting potential of different organic solid wastes: experience from the island of Crete

For the past 20 years, the National Foundation for Agricultural Research in Crete and the School of Agricultural Technology of the Technological and Educational Institute of Crete have been involved in a number of research and development activities, related to the production and evaluation of compost derived from a variety of local solid, mainly agricultural organic wastes. Materials such as olive press cake, olive tree leaves (OTL) and branches, vine branches (VB), pressed grape skins (PGS), pig manure (PM), sewage sludge and the organic fraction of municipal solid waste (OFMSW) have been evaluated for their behaviour during composting, their compatibility in mixtures and the quality of the end product. The quality evaluation included both a detailed physiochemical (pH, electrical conductivity (EC), nutrients concentration, heavy metal concentration, etc.) and biological analyses (pathogenic microorganisms). It also included an agronomic evaluation, in which composts were used either as a soil amendment or as a component for substrates in open air or covered (greenhouse) cultivation mainly of local vegetables (tomatoes, cucumbers, etc.). All materials were composted successfully, especially when mixed. The end products contained large amounts of organic matter, usually combined with an increased EC value. Pressed grape skins should be considered as the ideal raw material, producing a high quality compost, with the lowest EC value (1.57 mS cm(-1)) and the largest organic matter concentration (84.50%), compared to all other materials. When any of the produced compost was used in a ratio of 30% by volume (v/v), it increased plant growth, whereas in larger volumes, it presented phytotoxic behaviour, inhibiting both root and shoot development.     

Current Status of Manufacturing Hazardous Waste in Shanghai

Abstract

It is difficult to manage the manufacturing hazardous waste (MHW) which is generated from a huge amount of complicated sources and causes very serious pollution. Therefore more and more attention has been paid to MHW pollution. Shanghai, as an industrial and economic center and an international metropolis in China, has a vast industrial system spanning a multitude of sectors, which generates MHW not only in a huge magnitude but also in a large variety of types from complicated sources, resulting in severe pollution. In 2003, the production of MHW in Shanghai is about 3.96 × 10⁵ ton, involving 33 indices. Most of MHW in Shanghai is treated and disposed of, but a significant portion is not handled properly and effectively. This paper carries out in-field investigation on the current status of MHW production and treatment in Shanghai, and puts forward scientific proposals that Shanghai should facilitate cleaner production and minimize hazardous waste; strictly enforce hazardous waste registration system, strengthen monitoring the certified enterprises; strengthen intent disposal center construction and realize hazardous waste reclamation; accelerate establishing the technical criteria and the management policy, promote the research and development on the treatment and disposal technology, and strengthen information management, thus realizing integrated management on MHW pollution.     

废旧塑料回收利用技术

从我国废塑料回收利用的现状出发 ,分析了今后我国废塑料回收利用技术的发展趋势和应采取的措施 ,指出了废塑料回收利用的重要性。     

Environmental input-output model and its analysis with a focus on the solid waste management sectors

ＩｎｔｒｏｄｕｃｔｉｏｎＳｉｎｃｅｔｈｅｆｉｒｓｔｅｎｖｉｒｏｎｍｅｎｔａｌｉｎｐｕｔｏｕｔｐｕｔｍｏｄｅｌ(ＥＩＯＭ)(Ｃｕｍｂｅｒｌａｎｄ,1966)ｗａｓｅｓｔａｂｌｉｓｈｅｄｂｙｉｎｃｏｒｐｏｒａｔｉｎｇｅｎｖｉｒｏｎｍｅｎｔａｌｆａｃｔｏｒｓｉｎｔ?..     

环境经济优化设计案例

本文列举三例，论述完善价格机制发展城市燃气供应事业、运用排污权交易思想削减二氧化硫污染和利用市场干预促进固体废弃物回收，分别设计出优化方案，并概算出预期环境经济效益。     

投加颗粒活性炭强化餐厨垃圾的厌氧处理

通过投加颗粒活性炭（GAC）强化直接种间电子传递（DIET）进而提升餐厨垃圾的厌氧产甲烷处理效能,并研究了GAC投加导致的微生物群落变化.研究发现,投加了GAC的实验组反应器能够在更高的有机负荷下（10.4kgCOD/（m³·d））稳定运行并维持较高的甲烷产率,不投加GAC的对照组在有机负荷7.8kgCOD/（m³·d）时甲烷产率及pH值均明显降低,挥发酸大量积累,反应器酸化崩溃.微生物群落结构分析发现,GAC表面富集了大量可以胞外电子传递的细菌（占细菌丰度的34%）和可以参与DIET的产甲烷菌（占古菌丰度的88%）,表明GAC的加入可以有效富集这两类微生物的生长,并可能通过GAC强化DIET促进了餐厨垃圾的厌氧消化.