抛光铝粉爆炸及ABC粉体抑爆特性的实验研究

为研究抛光铝粉的爆炸危险和ABC粉体的抑爆特性,在对实验粉体粒径分布进行分析的基础上,采用20 L粉尘爆炸特性实验装置,分别对不同铝粉尘浓度、不同抑爆剂浓度条件下的爆炸特性参数进行测试。研究结果表明:在实验条件下,铝粉的爆炸下限为45 g/m3＜C＜60 g/m3;随铝粉浓度增加,爆炸烈度呈现出先增强后减弱的变化趋势,在浓度为400 g/m3时爆炸烈度最大。ABC抑爆剂能够有效抑制铝粉爆炸超压和爆炸反应进程,随着惰性粉体浓度的增加,抑制效果愈加明显,爆炸逐渐减弱。当ABC惰性粉体的质量占比增加到50%时,相较单一铝粉爆炸,反应过程时间由72 ms增加至785 ms,爆炸最大压力、最大压力上升速率分别下降了61.7%,89.5%;当ABC粉体质量占比为53%时,铝粉被完全惰化,未发生爆炸。     

For the sake of my family: Understanding unethical pro-family behavior in the workplace

Unethical behaviors are prevalent and costly in organizations, and much recent research attention has been paid to different forms of workplace unethical behaviors. We contend that the extant research has overlooked an important form of workplace-related unethical behaviors: unethical behaviors that are conducted to benefit one's family but which violate societal and organizational moral rules, a construct we label as “unethical pro-family behavior” (UPFB). Our paper systematically conceptualizes UPFB and develops a scale for it. Drawing upon social cognitive theory, we argue that employees with stronger family financial pressure are more likely to employ moral disengagement mechanisms to deactivate moral self-regulation, resulting in higher levels of UPFB. Additionally, we argue that the proposed relationship is more pronounced when employees have high family motivation but is mitigated when employees have high organizational identification. Two studies are conducted for this paper. In Study 1 (N = 328 for Sample 1; N = 243 for Sample 2; N = 279 for Sample 3; N = 267 for Sample 4), we demonstrate that our UPFB scale has good construct validity and that our construct is differentiable from relevant constructs. In two time-lagged survey samples in Study 2 (N = 255 for Sample 1; N = 233 for Sample 2), we find support for our hypotheses. Theoretical and practical implications, limitations, and future directions are discussed.     

Experimental research of LNG accidental underwater release and combustion behavior

Evaluating potential hazards caused by accidental LNG release from underwater pipelines or vessels is a significant consideration in marine transportation safety. The aim of this study was to capture the dynamic behavior of LNG jet released under water and to analyze its vapor dispersion characteristics and combustion characteristics on the water surface during different release scenarios. Controlled experiments were conducted where LNG was jet released from a cryogenic storage tank. The dynamic process of LNG being jet released from orifices of different sizes and shapes, as well as the rising plume structure, were captured by a high-speed camera. The leakage flow rate and pipeline pressure were recorded by a flow meter and pressure gauge, respectively. The concentration distribution that emanated from the water surface was measured utilizing methane sensors in different positions with various wind speeds. The flame combustion characteristics of LNG vapor clouds, which immediately ignited upon the enclosed water tank, were also recorded. Additionally, the mass burning rate of the flame on the water surface was evaluated, and a new correlation between the ratio of flame length and width was established. The results indicated a large dimensionless heat release rate (Q*) and a continuous release flow rate in a limited burning area. This study could provide greater understanding of the mechanisms of LNG release and combustion behavior under water.     

基于ZIF-L的微固相萃取技术测定地表水中痕量典型多环芳烃

制备类沸石咪唑酯骨架ZIF-L材料,将其用作微固相萃取吸附剂,处理水中萘、苊、苊烯、芴、菲、蒽、荧蒽、芘等8种痕量典型多环芳烃,再用HPLC测定。试验表明,ZIF-L对上述多环芳烃的萃取效率明显高于商品化萃取材料C 18和多壁碳纳米管。方法在0.100μg/L^200μg/L范围内线性良好,方法检出限为0.02μg/L^0.03μg/L,标准溶液5次测定结果的RSD为4.7%~9.5%,实际水样加标回收率为84.5%~115%。将该方法用于北太湖5个点位水样的测定,测定值为未检出~3.40μg/L。     

密相塔烟气脱硫技术试验研究

建立了密相塔烟气脱硫试验装置,并对烧结烟气进行了脱硫试验研究,验证了该工艺的可行性,并研究了主要因素对脱硫效率的影响.结果表明,钙硫比和近绝热饱和温度(approach to adiabatic saturation temperature,AAST)是影响脱硫效率的显著因素,循环灰浓度是保证系统脱硫效率的关键因素.在Ca/S比为1.2、密相塔出口烟气AAST=15℃、循环灰浓度为400g/m3条件下,系统能连续稳定运行,脱硫效率达92.5%以上,系统出口烟气中SO2浓度在150 mg/Nm3以下.     

负压二次曝气二氧化氯发生器的研制与应用

以氯酸钠和工业盐酸为基本原料,采用独特的负压二次曝气工艺,在催化剂作用下,经氧化还原反应产生以二氧化氯为主的混合消毒气体,经吸收后形成一定浓度的二氧化氯混合消毒液,与待处理水充分混合,达到杀菌消毒的目的。     

山东省主要河流中抗生素污染组成及空间分布特征

采用固相萃取-液相色谱/串联质谱法研究了山东省境内四大流域主要河流中抗生素污染组成及空间分布特征,涉及我国用量最大的6类共20种抗生素。结果表明:20种抗生素均有检出,且大环内酯类、喹诺酮类和四环素类抗生素整体检出浓度较高。就流域而言,半岛诸河流域抗生素污染较小,平均总质量浓度61.4 ng/L;海河流域、小清河流域和淮河流域相对较为严重,平均总质量浓度分别为232、175、118 ng/L。抗生素空间分布呈现一定的规律,检出浓度较高的点位主要集中在人口密集区下游,抗生素污染与周边生活污水、养殖企业废水和城市污水处理厂排水密切相关,而且抗生素组成可从一定程度上反映出污染来源。     

锐钛矿-金红石混合晶型TiO2降解气相苯

用溶胶-凝胶法并通过控制煅烧温度合成不同晶相比的混合晶型纳米TiO_2,在紫外光光照下降解气相苯。考察了苯初始质量浓度、紫外灯光照强度和催化剂加入量对苯去除率的影响;探究了光催化降解气相苯的动力学特征。结果表明:450℃煅烧制备的催化剂降解苯效率最高,此催化剂金红石相质量分数为6.30%;在苯初始质量浓度为74.39 mg/m~3、催化剂加入量为7 g、光照强度为2.18 klux的最佳条件下反应84 min,苯去除率达99.73%;光催化降解率与光照强度之间符合0.5级动力学特征;当催化剂加入量为3 g时,单位时间单位质量催化剂降解苯的质量最多;苯的光催化降解反应均符合一级动力学方程。     

液体旋流分离器分离效率的研究

液体旋流分离器是水环境污染治理的主要设备之一.分离效率是衡量液体旋流分离器分离过程进行完善程度的最重要的技术指标,它能从质与量两方面反映出设备性能的优劣.当前液体旋流分离器设计过程还缺少具体量化的理论依据,为了给液体旋流分离器的设计提供理论依据,通过液体旋流分离器从水中分离固体粒子的性能实验,得出了液体旋流分离器各部结构尺寸、形状、相对比例对分离效率的不同影响程度,提出了结构参数的最佳取值范围.按照本研究提出的设计原则和方法,可以制造出性能优良的液体旋流分离器.     

热解析-固相微萃取-气相色谱法测定空气样品中挥发性有机化合物

建立了热解析-固相微萃取-气相色谱法测定空气样品中挥发性有机化合物的分析方法,并对色谱分离条件、玻璃针筒保存样品的稳定性、固相微萃取萃取纤维、萃取时间、色谱进样时间等条件进行了优化,9种挥发性有机化合物的峰面积与其质量浓度在所测范围内有较好的线性关系,相对标准偏差＜8.8%,检出限为0.05～0.75 μg/100 mL,满足实际空气样品测定需要。