脉冲电晕等离子体活化纯CO2的反应

研究了在常温常压下，脉冲电晕等离子体对温室气体CO2的活化与转化分别考察了反应气体流速、脉冲电压峰值、放电频率对纯CO2转化的影响．结果表明，CO2主要分解为CO和O2，另有少量积碳和臭氧产生；随着反应气体流速的增加，CO2转化率、CO产率和选择性降低；随着脉冲电压峰值和放电频率的升高，CO2转化率、CO产率增大，CO选择性降低．     

呼和浩特市大气气态和颗粒物上正构烷烃的研究

采用聚氨基甲酸乙酯和玻璃纤维滤膜采集样品并测定。大气中总正构烷烃的浓度分布、气／固分布比与季节变化、污染源有关。在呼市大气中总正构烷烃（Ｃ１５－Ｃ３３），夏季主要存在气态中（７８％），而冬季主要存在于颗粒物上（８３％）。内蒙古草原大气对照样品中，气态中总正构烷烃在冬夏两季所占百分比都约为５０％。市区冬季大气颗粒物上的总正构烷烃浓度比其它城市结果高出１－２个数量级。     

高能等离子体分解CO_2气体研究

为治理温室气体ＣＯ_２，本工作在低温常压条件下，利用超高压脉冲电晕放电产生的高能量（２０～５０ｅＶ）非平衡等离子体作用于ＣＯ_２气体分子，使ＣＯ_２分子化学结合键断裂，在定向化学反应作用下，将ＣＯ_２气体分解成单原子气体分子Ｏ_２和单质固体微粒Ｃ。ＣＯ_２分解率在９０％以上。     

水相催化芳香氯化物脱氯研究

通过把起相转移作用的聚乙二醇（PEG）链，键合到硅胶上，再将聚乙烯吡咯烷酮（PVP）络合双金属Pd-Cu后负载其上，制成一种新型双负载双金属催化剂PVP－PdCl2/SiO2-PEG600,以甲酸钠为氢转移试剂，在水相催水芳香氯化物脱氯，当反应温度80℃左右，n(Pd):n(Cu）=2:1，反应介质pH值11．7左右时，具有较高的催化脱卤活性，催化剂不但易于制备，便于分离，且具有良好的重复使用性能，经重复使用六次，转化率仍在70％以上。     

Current status of applying microwave-associated catalysis for the degradation of organics in aqueous phase – A review

1. Download high-res image (67KB)
2. Download full-size image

     

水质·杀菌剂多菌灵的测定固相萃取-HPLC法

本方法是用固相萃取法萃取水和废水中的多菌灵,取浓缩纯化后的有机相直接进样到高效液相色谱仪,用二极管矩阵检测器检测,根据保留时间外标法定量.     

Thriving on challenge stressors? Exploring time pressure and learning demands as antecedents of thriving at work

In the conceptualization of thriving at work, it is emphasized that employees' learning and vitality are two equally important components of thriving and that thriving is facilitated by contextual features and available resources. In this study, we examined the effects of two challenge stressors (time pressure and learning demands) on thriving at work. Based on the literature on challenge and hindrance stressors, we proposed that challenge stressors positively affect learning and negatively affect vitality. To uncover underlying mechanisms, we measured challenge appraisal and hindrance appraisal of work situations in a diary study. A sample of 124 knowledge workers responded to three daily surveys (before the lunch break, during the afternoon, and at the end of the workday) for a period of five workdays. Results indicate that the indirect effects of learning demands and time pressure on learning are mediated by challenge appraisal, whereas indirect effects of learning demands on vitality are mediated by hindrance appraisal. Overall, our study shows that challenge stressors have a positive total effect on learning but no total effect on vitality. These differential relationships call for a finer distinction between the two components of thriving at work in future research. Copyright © 2016 The Authors Journal of Organizational Behavior Published by John Wiley & Sons Ltd.     

被保护层双重卸压特性研究

为探索复合煤层群保护层开采时在双重卸压条件下被保护层的不同卸压特性,采用物理相似模拟试验和计算机数值模拟来研究其双重卸压规律。对比分析被保护层的膨胀率和卸压率后发现:在双重卸压条件下,被保护层的膨胀变形呈现"M"形态,膨胀率在不同时空下表现出叠加特性;另外,煤岩体的弹性势能因受首采保护层的影响而释放,被保护层卸压率表现出卸压区域边缘不连续而卸压程度和范围均增加的特点。最后,现场测试计算得到被保护层的透气性系数,其变化规律证实双重卸压效果明显。     

Towards sustainable consumption: Predicting the impact of social‐psychological factors on energy conservation intentions in Northern Cyprus

The incessant demand and consumption of energy services among individuals’ is increasing throughout the world. Individuals’ electricity consumption in Northern Cyprus has risen considerably. However, the demand for electrical energy services on the island is heavily reliant on imported fossil fuels. Burning fossil fuels has adverse effects on its environment. Therefore, sustainable energy consumption is required and individuals are targeted for energy conservation to reduce electricity consumption. Against this background, using the Structural Equation Modeling approach, this research incorporates social‐psychological factors; personal norms, positive and negative emotions into the theory of planned behaviour (TPB) model to assess the relationships among the variables, explain their impact on consumers’ electricity conservation intentions and enhance the explanatory power of the model. Data was conveniently obtained from a quantitative sample of 400 electricity consumers. The results indicate that negative emotions have the strongest significant influence on intentions, but personal norms have the least effect on intentions to save electricity. Furthermore, the study revealed that our expanded TPB model can provide improved explanatory power more than the original TPB. Policy implications, limitations and future research are discussed.     

The effects of component dimensions on heat transfer and pressure loss in shell and tube heat exchangers

In this study, the effects of geometric properties such as baffle spacing, baffle cut, sealing strips, gaps between heat exchanger components, number of tubes and tube passes have been investigated for shell and tube heat exchangers (STHE). For this purpose, geometrical dimensions and data of a specific heat exchanger (HE) used in an industrial application have been obtained. The HTRI Xchanger Suite Educational software was utilized to analyze the reference HE, to verify the results of the software and the output temperatures of the fluids, the shell side heat transfer coefficient (HTC) and the pressure loss (PL) values were compared with the experimental data. After confirming that the results of the software were within the acceptable deviation values, the geometric dimensions of the reference design were changed and new analyzes were carried out to examine the effects of several dimension options on the performance of STHE. Results were discussed in a detailed and comprehensive manner via curves.