药物混粉爆炸事故及防范对策的研究

从近几年制药行业频繁爆炸事故出发,分析制药行业爆炸事故的种类,从粉尘爆炸入手,以某制药企业为研究对象,对其爆炸粉体克拉维酸钾进行了爆炸参数测试,运用20L球形粉尘爆炸测试装置测定其爆炸下限为40g/m3。同时运用差热扫描热分析法对其进行放热反应进行研究,再利用毛细管气相色谱法对该混合物中是否存在可燃气体进行了评定,发现其存在丙酮可燃气体,但含量较低为9.3×10-5。针对上述特点,从技术和管理角度出发,分析应对措施以及常见的问题,设计了混粉机械人机界面,编制了安全检查表,对该类共性问题进行了归纳,以供防范药物混粉事故发生参考。     

川西气田地层水回注选井选层研究

根据川西气田的实际情况,对致密砂岩层回注选井选层技术进行研究,初步建立了致密砂岩层回注选井选层技术,优选出川西气田1、2、3号等5个回注井区。目前,注水规模300m3/d,累计注水量达75 698.8m3,节约生产成本约200万元,且有效缓解了高浓度氯离子地层水外排带来的环保压力。现场回注试验表明:致密砂岩层回注高浓度氯离子地层水是可行的,回注选井选层技术具有现场推广应用价值。     

重铬酸钾法测定炼油废水COD的适用性分析

为了分析0.250 mol/L与0.025 mol/L重铬酸钾法测定炼油催化剂行业高氯废水COD的适用性,进行了比对实验。结果表明：两者测定结果相差60.5～76.8 mg/L;高浓度重铬酸钾法精密性较好, RSD%≤4.8%,准确度较高,与氯气校正法测定结果基本吻合,相对误差≤6%;低浓度的重铬酸钾法精密性相对较差, RSD%≥8.1%,与氯气校正法测定结果相对误差大于40%,准确度低。在控制稀释水样Cl-浓度500～800 mg/L范围时,采用重铬酸钾法测定COD,适宜于高浓度的方法。     

Degradation of PVC Containing Mixtures in the Presence of HCl Fixators

Degradation of a model polymer mixture (PVC/PS/PE) and a waste polymer mixture in the presence of HCl fixators (Red Mud, precipitated CaCO₃ and dolamite) was studied using thermal gravimetric analysis (TGA) and a cycled-spheres-reactor. The experiments in cycled-spheres reactor model were performed by stepwise pyrolysis. Liquid products and HCl from each step were collected separately. For the model polymer mixture, the precipitated CaCO₃ showed the best effect on the fixation of evolved HCl and the reduction of chlorine content in the liquid products whereas RM yielded the best result for the waste polymer mixture. In addition, using HCl fixator also affected the degradation of both types of polymer mixture, leading to the formation of more gaseous and less residue.     

离子液体1-丁基-3-甲基咪唑氯盐对斜生栅藻的毒性效应

按照毒性试验标准方法研究了不同浓度离子液体1-丁基-3-甲基咪唑氯盐([BMIM]Cl)对斜生栅藻的影响,测定了半数抑制浓度(IC50)、叶绿素含量、超氧化物歧化酶(SOD)活性、过氧化氢酶(CAT)活性以及藻细胞通透性的变化,观察了80mg/L[BMIM]Cl处理96h对藻细胞的影响.结果表明:[BMIM]Cl对斜生栅藻生长具有抑制作用,随着浓度的增大抑制率增加,叶绿素含量下降, 48h IC50、72h IC50和96h IC50分别为103.77、76.44和68.49mg/L.藻细胞对[BMIM]Cl有一定的氧化应激反应,CAT和SOD活性随[BMIM]Cl浓度升高而降低.[BMIM]Cl对藻细胞的细胞膜有一定程度的破坏作用,藻细胞通透性随浓度升高而增大,同时藻细胞的超微结构受到了[BMIM]Cl的影响,造成质壁分离,叶绿体片层断裂,线粒体嵴数量减少.     

厌氧条件下活性黑(KBR)染料脱色的批量投料研究

在厌氧条件下，进行了微生物降解染料活性黑（ＫＢＲ）的试验研究。试验中研究了氯离子浓度、染料浓度、生物量、特别是投加易降解物对染料降解的影响，并且对厌氧降解该染料的过程进行了分析，着重探讨了易降解物葡萄糖投加量对该染料脱色降解的作用     

Degradation of metabolites accumulated of benzo[a]pyrene by coupling Penicillium Chrysogenum with KMnO4

Several main metabolites of benzo[a]pyrene （BaP） formed by Penicillium chrysogenum, Benzo[a]pyrene-1,6-quinone （BP 1,6- quinone）, trans-7,8-dihydroxy-7,8-dihydrobenzo[a]pyrene （BP 7,8-diol）, 3-hydroxybenzo[a]pyrene （3-OHBP）, were identified by high-performance liquid chromatography （HPLC）. The three metabolites were liable to be accumulated and were hardly further metabolized because of their toxicity to microorganisms. However, their further degradation was essential for the complete degradation of BaP. To enhance their degradation, two methods, degradation by coupling Penicillium chrysogenum with KMnO4 and degradation only by Penicillium chrysogenum, were compared; Meanwhile, the parameters of degradation in the superior method were optimized. The results showed that （1） the method of coupling Penicillium chrysogenum with KMnO4 was better and was the first method to be used in the degradation of BaP and its metabolites; （2） the metabolite, BP 1,6-quinone was the most liable to be accumulated in pure cultures; （3） the effect of degradation was the best when the concentration of KMnO4 in the cultures was 0.01% （w/v）, concentration of the three compounds was 5 mg/L and pH was 6.2. Based on the experimental results, a novel concept with regard to the bioremediation of BaP-contaminated environment was discussed, considering the influence on environmental toxicity of the accumulated metabolites.     

纳米铁强化的混凝-沉淀-过滤工艺对典型印染废水中有机物去除

以东江流域某典型印染企业尾水为研究对象,将混凝剂与少量的纳米铁进行复合投加,再结合多介质过滤器对印染尾水进行深度处理实验研究.结果表明,新型混凝剂HPAC-9对极性有机物具有较强的去除能力,但对非极性或弱极性有机物去除效果不很理想.通过将纳米铁与HPAC-9复合投加并结合多介质过滤工艺,对印染企业尾水中的有机污染物进行...     

五氟苯甲酰氯衍生色谱法分析水体中痕量羟基多溴联苯醚

以五氟苯甲酰氯(PFBCl)作为衍生化试剂,气相色谱-电子捕获检测器(Gas chromatography-electron capture detector,GC-ECD)为检测手段,建立了水体中痕量羟基多溴联苯醚(Hydroxylated polybrominated diphenyl ethers,简称OH-PBDEs)的酰基化衍生-GC/ECD检测方法.通过实验讨论了衍生化缓冲溶液、衍生化时间以及衍生后萃取溶液异辛烷的用量对检测结果的影响,确定了最佳的衍生化条件.在最佳的衍生化条件下,4-OH-BDE 42、4’-OH-BDE 49、6-OH-BDE 47、2’-OH-BDE 68和6’-OH-BDE 99的衍生化产物均获得了良好的分离度和色谱响应值.本方法的仪器检出限为0.02—0.14 pg,方法检出限为0.61—4.67 pg.L-1,标准曲线线性相关系数的范围为0.9973—0.9996,相对标准偏差均小于10%.3种采自大连市不同地区环境水样的加标回收率检测结果表明,所建立的分析方法适于水体中痕量OH-PBDEs的检测.     

高锰酸钾强化三氯化铁共沉降法去除亚砷酸盐的效能与机理

研究了不同水质条件下KMnO₄强化FeCl₃共沉降去除亚砷酸盐[As(Ⅲ)]的效能与机理.考察了pH值、天然有机物(NOM)等因素对As去除效能的影响.结果表明,投加KMnO₄显著提高了FeCl₃共沉降除砷(FCP)工艺对As(Ⅲ)的去除效能.随着Fe(Ⅲ)投量由2.0mg/L增大到8.0mg/L,对于FCP工艺,As去除率由41.3%提高到75.4%;而对于KMnO₄-FeCl₃共沉降除砷(POFCP)工艺,As去除率则由61.2%提高至99.3%.FCP及POFCP工艺对As的去除率均随着pH值的升高而升高;与FCP工艺比较,pH值对POFCP工艺除As效果影响较小;NOM降低了FCP工艺对As的去除率,而对POFCP工艺无明显影响.KMnO₄的氧化作用是强化As(Ⅲ)去除效能的主要因素,而KMnO₄的还原产物水合MnO₂(s)对As(Ⅲ)也具有一定的去除能力.POFCP工艺是强化去除水中As(Ⅲ),以保障安全饮用水供给的有效方法.