轧钢污泥综合利用的技术研究

阐述了一种轧钢污泥的回收处理技术,该技术可把轧钢污泥有效地分离成氧化铁粉和混合油,实现综合利用,减少铁素资源浪费,有良好的经济效益和环境效益.     

磁性载体生物膜反应器处理生活污水的试验研究

选取天然多孔矿物-浮石、网络状塑料外壳、磁铁为材料,开发出一种新型磁性载体,并将该载体应用于生物膜反应器中进行废水处理试验,结果表明:该磁性载体生物膜反应器在载体的挂膜性能及主要污染物去除功能上均优于非磁性载体生物膜反应器.磁性载体可在5d内完成挂膜,而非磁性载体则需8d,磁性载体生物膜反应器对COD、NH+ 4-N的去除率比非载体生物膜反应器分别高出5%和20%左右.在载体中心磁场强度为200Gs,水中溶解氧DO为2.0~3.5mg/L,水力停留时间HRT为5h的条件下,校园生活污水经磁性载体生物膜反应器处理后,出水中COD稳定在20mg/L左右, NH4+-N在5mg/L以下,两者的去除率均在90%左右,出水总氮为15mg/L,去除率在50%以上.实验结果还表明:连续运行60d后,磁性载体反应器内的生物膜量和悬浮污泥量仅为非磁性载体反应器的70%,说明磁场的存在有利于污泥减量化.磁载体生物膜反应器中载体外表面附着污泥及生物膜的SOUR值均大于非磁载体生物膜反应器,表明一定的磁场强度可以提高微生物活性.     

Continuous biohydrogen production from diluted molasses in an anaerobic contact reactor

An anaerobic contact reactor (ACR) system comprising a continuous flow stirred tank reactor (CSTR) with settler to decouple the hydraulic retention time (HRT) from solids retention time (SRT) was developed for fermentative hydrogen production from diluted molasses by mixed microbial cultures. The ACR was operated at various volumetric loading rates (VLRs) of 20–44 kgCOD·m^-3·d^-1 with constant HRT of 6 h under mesophilic conditions of 35°C. The SRT was maintained at about 46–50 h in the system. At the initial VLR of 20 kgCOD·m^-3·d^-1, the hydrogen production rate dropped from 22.6 to 1.58 L·d^-1 as the hydrogen was consumed by the hydrogentrophic methanogen. After increasing the VLR to 28 kgCOD·m^-3·d^-1 and discharging the sludge for 6 consecutive times, the hydrogentrophic methanogens were eliminated, and the hydrogen content reached 36.4%. As the VLR was increased to 44 kgCOD·m^-3·d^-1, the hydrogen production rate and hydrogen yield increased to 42.1 L·d^-1 and 1.40 mol H₂·molglucose-consumed^-1, respectively. The results showed that a stable ethanol-type fermentation that favored hydrogen production in the reactor was thus established with the sludge loading rate (SLR) of 2.0–2.5 kgCOD·kgMLVSS^-1·d^-1. It was found that the ethanol increased more than other liquid fermentation products, and the ethanol/acetic acid (mol/mol) ratio increased from 1.27 to 2.45 when the VLR increased from 28 to 44 kgCOD·m^-3·d^-1, whereas the hydrogen composition decreased from 40.4% to 36.4%. The results suggested that the anaerobic contact reactor was a promising bioprocess for fermentative hydrogen production.     

Co-fermentation of waste activated sludge with food waste for short-chain fatty acids production: effect of pH at ambient temperature

Effect of pH ranging from 4.0 to 11.0 on co-fermentation of waste activated sludge (WAS) with food waste for short-chain fatty acids (SCFAs) production at ambient temperature was investigated in this study. Experimental results showed that the addition of food waste significantly improved the performance of WAS fermentation system, which resulted in the increases of SCFAs production and substrate reduction. The SCFAs production at pH 6.0, 7.0, 8.0, and 9.0 and fermentation time of 4 d was respectively 5022.7, 6540.5, 8236.6, and 7911.7 mg COD·L^-1, whereas in the blank tests (no pH adjustment, pH 8.0 (blank test 1), no food waste addition, pH 8.0 (blank test 2), and no WAS addition (blank test 3)) it was only 1006.9, 971.1, and 1468.5 mg COD·L^-1, respectively. The composition of SCFAs at pH from 6.0 to 9.0 was also different from other conditions and propionic acid was the most prevalent SCFA, which was followed by acetic and n-butyric acids, while acetic acid was the top product under other conditions. At pH 8.0 a higher volatile suspended solids (VSS) reduction of 16.6% for the mixture of WAS and food waste than the sole WAS indicated a synergistic effect existing in fermentation system with WAS and food waste. The influence of pH on the variations of nutrient content was also studied during anaerobic fermentation of the mixture of WAS and food waste at different pH conditions. The release of NH4+-N increased with fermentation time at all pH values investigated except 4.0, 5.0 and in blank test one. The concentrations of soluble phosphorus at acidic pHs and in the blank test one were higher than those obtained at alkaline pHs. Ammonia and phosphorus need to be removed before the SCFAs-enriched fermentation liquid from WAS and food waste was used as the carbon source.     

The correlation of total and extractable heavy metals from soil and domestic sewage sludge and their transfer to maize ( Zea mays L.) plants

A study to understand the mobility and transport of heavy metals (HMs) from soil and soil amended with sewage sludge to maize plants was carried out. The total and ethylenediaminetetraaceticacid (EDTA)-extractable HMs in agricultural soil and untreated domestic sewage sludge samples, and the correlation between the total and extractable metals in soil and sewage sludge were carried out. Pot experiments were performed to study the transfer of HMs to maize grains, grown in soil (control) and in soil amended with sewage sludge (test samples). The total and extractable HMs in soil, sewage sludge, and maize grains were analysed by FAAS/ETAAS (flame atomic absorption spectrometer/electrothermal atomic absorption spectrometer) after digestion in microwave oven. Statistically significant correlations were obtained between the total contents of Cu, Cd, As and their respective extractable fractions in soil, while in domestic wastewater sludge (DWS) the better correlation was observed only for Ni and Cd. The edible part of maize plants (grains) from test samples presented high concentration of Zn, Pb, Ni, Cd, Cu, As, and Cr concentrations (80.7–85.6, 3.8–3.95, 2.35–2.5, 0.75–0.82, 3.21–3.29, 0.23–0.27, and 0.22–0.29?mg?kg^?1, respectively). Good correlations were found between metals in exchangeable fractions of both soil and DWS and total metals in control and test samples of maize grains. The transfer factor of all HMs from DWS to maize grains was also determined.     

印染污泥焚烧烟气污染控制案例分析

以广东省某两家印染厂的印染污泥焚烧项目为主要研究对象,从污泥处理技术路线、焚烧设备及烟气处理流程等各方面入手,对各厂印染污泥与煤混烧烟气中颗粒物、NOx、SO2、酸性气体(HF、HCl)和重金属等污染物的进行采样分析,并对各厂现有烟气污染物控制设施的运行效果进行调研,结果表明,布袋除尘的效果较为理想,除尘效率可达99%以上;使用印染废水作为吸收液的湿法脱硫技术对SO2及酸性气体的去除效果不理想;SNCR对NOx具有一定的去除效果,是一种较为经济、高效的脱硝技术;焚烧后,大部分重金属最终以飞灰的形式被除尘器去除,但仍有部分重金属如Hg在出口烟气中的浓度仍然很高,需要采取必要的措施控制烟气中的重金属. 此外,基于印染污泥焚烧实例分析,提出适于印染污泥与煤混烧烟气处理工艺流程.     

低DO微孔曝气变速氧化沟脱氮能力恢复效果分析

活性污泥法低温运行中的污泥膨胀主要是由丝状菌引起,微丝菌(M.Parvicella)则是污泥膨胀中的优势丝状菌.针对微孔曝气变速氧化沟中试系统中因低温引起的污泥严重膨胀及其污泥硝化能力降低的问题,采取增大曝气量快速培养污泥硝化菌含量,再逐渐增加A:O比为0,0.1,0.5,1.1,1.8提高反硝化能力,从而恢复污泥脱氮能力.在恢复期间,污泥絮体中的疏水性M.Parvicella附着于反硝化产生气体上,在选择池和氧化沟表面形成浮泥,对其进行去除,以减少絮体中丝状菌含量,提高硝化菌含量及其硝化能力.同时对不同微丝菌含量的污泥絮体(沟内混合液和表面浮泥)的硝化和反硝化速率进行测定,结果表明微丝菌含量高的活性污泥其硝化能力较弱,而快速反硝化能力较强,则对慢速和内源反硝化影响不大.进一步证明M.Parvicella也是除了DO浓度,水温和负荷之外影响活性污泥硝化能力和污泥沉降性能的重要因素之一.     

锅炉废气流化床污泥干化塔的热力计算与分析

利用锅炉尾部废烟气(120～190℃)干化市政污泥,降低污泥含水率可达到后继合理利用。从三方面对污泥干化进行了分析:1)干燥后污泥含水率与污泥处理量关系;2)入口烟温、流量与污泥处理量关系;3)干燥后烟气相对湿度影响因素分析。结果表明:提高入口烟温、流量,污泥出口含水率都可以提高污泥处理量,高入口烟温、流量下,污泥处理量受含水率的影响更大;污泥出口含水率高时,入口烟温提高使污泥处理量提高增大显著;入口烟气流量愈高,入口烟温提高对污泥处理量的增加愈大。干燥后烟气相对湿度与入口烟温有关,干燥之后的烟气的相对湿度离饱和状态较远,此温度范围内的出口烟气湿度还有较大的余量。     

液氮冻融破碎生物污泥制备生物絮凝剂

利用城市剩余生物污泥,采用液氮冻融破碎、提取液提取的方法制备了生物污泥絮凝剂。对絮凝剂的制备条件及其絮凝性能进行了研究,结果表明:采用液氮冻融破碎,pH为1.0的稀盐酸溶液作为提取液提取所制备的絮凝剂,对高岭土悬浮液的絮凝效率可达98.5%。液氮冻融破碎的次数对絮凝剂制备没有明显影响。同时考察了絮凝剂投加量以及絮凝体系的pH对絮凝剂絮凝活性的影响。     

g 辐照预处理促进剩余污泥发酵产氢的研究

为降低能耗,提高辐照技术的经济性,探讨了在0~9.5kGy范围内,γ辐照剂量对生活污水处理厂二沉池剩余污泥中耗氢菌的抑制效果和对发酵产氢的影响,建立了描述发酵产氢过程及辐照影响的动力学模型.结果表明,γ辐照剂量从0增加至9.5kGy时,污泥溶解率从0增加至4%,上清液中可检测出一定的蛋白质和多糖等物质,其中蛋白质中的氮素占溶出总氮素的90%,表明较低剂量辐照即对污泥菌体造成较明显的破解,这可在一定程度上抑制无法形成芽孢的耗氢菌活性;与之相对应的是污泥发酵产氢能力的明显提升,以葡萄糖为底物(1.0g/L),在35℃和初始pH值为7.0时,当辐射剂量仅为0.5kGy时,累积产氢量即比未辐照时有70%的提升,进一步增加辐照剂量至5kGy,累计产氢量和产氢得率均继续增长且达到最大值,分别为240mL/g葡萄糖和1.93mLH2/mol葡萄糖(发酵液的污泥量达2.0g VSS/L);此后,污泥发酵产氢能力随辐射剂量的增加而降低.修正的Logistic模型能很好地描述本研究中累积产氢量随时间的变化规律,而修正的Han-Levenspiel模型能很好地描述辐照剂量对平均产氢速率的影响.