纯种氨氧化菌短程反硝化特性

以Comamonas aquatica LNL3为研究对象,根据其既能短程硝化又能短程反硝化的特性,采用好氧方式富集和固定化菌种,再以厌氧方式驯化,得到具有高效短程反硝化特性的纯种氨氧化菌。采用扫描电镜对固定化前后的载体进行表征,且用正交试验考察了不同环境因子(温度、pH、碳氮比、溶解氧)对Comamonas aquatica LNL3短程反硝化的影响。结果表明,所用载体与Comamonas aquatica LNL3有良好的亲和性,适于微生物的固定化;环境因子对Comamonas aquatica LNL3短程反硝化影响大小顺序为:温度>pH>DO>C/N;在环境条件改变过程中当温度为35℃,pH=8,C/N=3,DO=2.5 mg/L时,Comamonas aquatica LNL3短程反硝化速率达到最大,为32.63 mg/(L.h);研究结果还表明,Comamonas aquatica LNL3具有好氧反硝化特性,适宜处理低碳氮比废水。     

Rain‐washing of foliar deposits of Dimilin®WP‐25 formulated in four different carrier liquids

Abstract

Dimilin^® WP‐25, a wettable powder formulation of diflubenzuron (DFB) [1‐(4‐chlorophenyl)‐3‐(2,6‐difluorobenzoyl) urea], was formulated in four different carrier liquids, viz., water; a light petroleum paraffinic oil, ID 585; a heavy paraffinic oil, Sunspray^® 7N; and a 1:2 mixture of a light petroleum aromatic solvent (Cyclosol^® 63) and canola oil; to provide four end‐use mixtures, Dim‐W, Dim‐585, Dim‐7N and Dim‐Cy‐C respectively, each containing 28 g of DFB per litre. Balsam fir branch tips clipped from greenhouse‐grown seedlings, and sugar maple branch tips clipped from field‐grown young trees, were exposed to uniform‐sized droplets (ranging in diameters from 135 to 190 μm) of the four end‐use mixtures which were atomized using a monodispersed droplet generator. Droplets were collected on the fir and maple branch tips and the initial residue per g fresh weight of foliage was determined by high‐performance liquid chromatography (HPLC). The branch tips were exposed to cumulative rainfall of 3, 6 and 10 mm at an intensity of 5 mm/h and at time intervals of 1, 12, 36 and 72 h after DFB treatment, to test the influence of ‘ageing’ of foliar residues on rainfastness. Foliar samples were collected for residue determination just before the onset of rainfall, and at 0.5 h post‐rain. DFB was quantified by the HPLC method. In the case of fir foliage, the Dim‐W formulation was the most susceptible to rain‐washing and the rainfastness did not increase with the ageing period of foliar deposits. In contrast, the three oil‐based mixtures showed greater rainfastness depending upon the carrier liquid and the ageing period. Rainfastness decreased in the order of Dim‐Cy‐C > Dim‐7N > Dim‐585 > Dim‐W. In contrast, the data on maple foliage indicated that the ageing of deposits increased the rainfastness of all the 4 end‐use mixtures. Dim‐585 was the most susceptible to rain washing, and rainfastness decreased in the order of Dim‐W > Dim‐Cy‐C > Dim‐7N > Dim‐585.     

还原-ZPF催化氧化降解2,4-DNT效果及其机制

以实验室制备的α-FeOOH柱撑人造沸石（zeotileartificial pillared byα-FeOOH,ZPF）为催化剂,并利用FTIR与XRD技术进行表征,采用批式实验研究其催化H2O2氧化去除地下水中难降解有机污染物2,4-二硝基甲苯（2,4-DNT）的效能,对比分析不同pH条件下Fe0还原、ZPF催化...     

应用CALINE4模式估算机动车排放污染物的浓度——以济南市主干道为例

随着经济的快速发展,机动车排气污染已成为我国城市空气污染的重要来源,而且在一定时段,机动车排气污染已成为空气污染最主要的污染源之一。以济南市经十路为例,采用实地调查的方法,得出各时段的车流量,选用大气环评助手EIAA中的CALINE4模式对机动车尾气中的主要污染物CO、NOx、THC的排放浓度进行估算,得出3种污染物CO、NOx、THC最大值均出现在7:00—8:00之间,最小值均出现在12:00-13:00之间,排放强度由大到小为:CO、THC、NOx。     

Two-site kinetic modeling of bacteriophages transport through columns of saturated dune sand

Breakthrough curves, on a semi-log scale, from tests in porous media with block-input of viruses, bacteria, protozoa and colloidal particles often exhibit a typical skewness: a rather slowly rising limb and a smooth transition of a declining limb to a very long tail. One-site kinetic models fail to fit the rising and declining limbs together with the tail satisfactorily. Inclusion of an equilibrium adsorption site does not seem to improve simulation results. This was encountered in the simulation of breakthrough curves from a recent field study on the removal of bacteriophages MS2 and PRD1 by passage through dune sand. In the present study, results of laboratory experiments for the study of this issue are presented. Breakthrough curves of salt and bacteriophages MS2, PRDI, and phiX174 in 1 D column experiments have been measured. One- and two-site kinetic models have been applied to fit and predict breakthrough curves from column experiments. The two-site model fitted all breakthrough curves very satisfactorily, accounting for the skewness of the rising limb as well as for the smooth transition of the declining limb to the tail of the breakthrough curve. The one-site model does not follow the curvature of the breakthrough tail, leading to an overestimation of the inactivation rate coefficient for attached viruses. Interaction with kinetic site 1 is characterized by relatively fast attachment and slow detachment, whereas attachment to and detachment from kinetic site 2 is fast. Inactivation of viruses and interaction with kinetic site 2 provide only a minor contribution to removal. Virus removal is mainly determined by the attachment to site 1. Bacteriophage phiX174 attached more than MS2 and PRD1, which can be explained by the greater electrostatic repulsion that MS2 and PRD1 experience compared to the less negatively charged phiX174.     

3D打印技术在固体废弃物资源循环中的应用

打印材料是限制3D打印技术发展和推广应用的瓶颈问题,目前已经发现部分固体废弃物与3D打印的契合度很高,可以用于制备3D打印材料.本文综述了4类可以用于3D打印的固体废弃物,包括硅铝基废弃物、农林废弃物、废旧塑料和废旧金属,着重讨论了这4类废弃物制备3D打印材料的方法以及废弃物的添加对原打印材料造成的影响,同时分析了当前...     

HPA／ZnFe2O4-TiO2光催化剂的制备及对马拉硫磷的可见光降解

以纳米TiO2载体,利用浸渍法制备了HPA／ZnFe2O4-TiO2光催化剂。对制备的催化剂进行了XRD、BET、TEM和UV-vis DRS表征。结果表明,催化剂样品均为锐钛矿相且ZnFe2O4很好地分散在载体表面,HPA／ZnFe2O4-TiO2光催化荆的平均粒径为10nm且在380-670nm均有强的光响应;反应最佳的HPA浓度为O.08molfL,最佳的ZnFe2O4负载量为1％。考察了HPA溶液初始浓度、ZnFe2O4负载量、溶液初始pH值、H2O2用量、催化剂用量对催化剂活性的影响。在溶液初始pH=13,H2O2=6mmol／L,催化剂用量为2g/L的最优条件下,光照反应进行100min后,马拉硫磷的降解率可达87％;重复4次后马拉硫磷的降解率仍可以达到67％。     

喷灌和沟灌方式对农田土壤NH3挥发的影响

研究了2016和2017年传统灌溉（沟灌）和节水灌溉（喷灌）方式氨（NH₃）挥发的季节年际动态变化特征及其影响因素.采用通气法进行原位监测,分析了土壤温度、体积含水量、铵态氮（NH₄⁺-N）、硝态氮（NO₃^--N）以及气温降水等因素对NH₃挥发的影响.结果表明,NH₃挥发速率的峰值出现在施用氮肥后1~2周,喷灌有效降低NH₃挥发峰值,喷灌和沟灌的NH₃挥发速率峰值在2016年分别为2.67kg/（hm²·d）和11.11kg/（hm²·d）,2017年分别为2.42kg/（hm²·d）和11.73kg/（hm²·d）;马铃薯生长季NH₃挥发存在明显的季节变化,挥发高峰主要发生在7~8月,追肥期高于基肥期.2016~2017年农田土壤NH₃累积挥发量均表现为喷灌<沟灌,与沟灌相比,喷灌分别减少58.15%和43.55%.NH₃挥发速率与土壤温度呈显著正相关（P<0.05）,与体积含水量、NH₄⁺-N、NO₃^--N浓度呈极显著正相关（P<0.01）.     

Arbuscular mycorrhizal fungi alter the response of growth and nutrient uptake of snap bean（Phaseolus vulgaris L.） to O_3

The effects of arbuscular mycorrhizal fungi (AMF) Glomus mosseae on the responses to elevated O3 in growth and nutrition of snapbean (Phaseolus vulgaris L. cv Guangzhouyuan) were investigated. Exposure was conducted in growth chambers by using three O3concentrations (20 (CF), 80 (CFO1) and 120 nL/L (CFO2); 8 hr/day for 75 days). Results showed that elevated O3 slightly impactedoverall mycorrhizal colonization, but significantly decreased the proportional frequency of hypha and increased the proportionalfrequency of spores and vesicles, suggesting that O3 had significant effects on mycorrhizal structure. Elevated O3 significantly decreasedyield, dry mass and nutrient contents (N, P, K, Ca and Mg) in both non-mycorrhizal and mycorrhizal plants. However, significantinteractive effects were found in most variables due to that the reduction by O3 in the mycorrhizal plants was less than that in thenon-mycorrhizal plants. Additionally, AMF increased the concentrations of N, P, Ca, and Mg in shoot and root. It can be concludedthat AMF alleviated detrimental effects of increasing O3 on host plant through improving plant nutrition and growth.