电石炉炉气电改袋除尘技术

介绍了某厂3台20 000kVA内燃式电石炉炉气除尘系统由原来采用的电式除尘器改为袋式除尘器技术,同时将原系统内的增湿塔改造为强制风冷及预荷电、预除尘设备,这样不但可以降低烟气温度使其满足袋式除尘器对进口烟气温度的要求,同时使微细粉尘荷电凝聚,提高了后续袋式除尘器对颗粒的捕集效率,并降低了袋式除尘器的阻力损失。改造后的系统运行稳定,烟气出口排放浓度满足国家环保要求。     

Choice of teenagers' vehicles and views on vehicle safety: survey of parents of novice teenage drivers

Objective

To examine parental decisions about vehicles driven by teenagers and parental knowledge of vehicle safety.

Methods

About 300 parents were interviewed during spring 2006 in Minnesota, North Carolina, and Rhode Island while teenagers took their first on-road driving tests.

Results

Fewer than half of parents surveyed said teenagers would be the primary drivers of the chosen vehicles. Parents most often cited safety, existing family vehicle, and reliability when explaining the choices for their teenagers’ vehicles. About half of the vehicles intended for teenagers were small/mini/sports cars, pickups, or SUVs — vehicles considered less safe for teenagers than midsize/large cars or minivans. A large majority of vehicles were 2001 models or earlier. Vehicles purchased in anticipation of adding a new driver to the family were more likely to be the sizes/types considered less safe than vehicles already owned. Few parents insisted on side airbags or electronic stability control, despite strong evidence of their safety benefits. Even when asked to identify ideal vehicles for their teenagers to drive, about half of parents identified less safe vehicle sizes/types. Most parents knew that midsize/large vehicles are safer than small vehicles, and at least half of parents said SUVs and pickups are not safe for teenage drivers, citing instability.

Conclusions

The majority of parents understood some of the important criteria for choosing safe vehicles for their teenagers. However, parents actually selected many vehicles for teenagers that provide inferior crash protection.

Impact on industry

Vehicle safety varies substantially by vehicle size, type, and safety features. Many teenagers are driving inferior vehicles in terms of crashworthiness and crash avoidance.     

The recycling cycle of materials as a design project tool

Currently, a large number of companies consider recycling of materials as an opportunity to maximize profits and to reduce the environmental impact generated by these materials after they are disposed. However, there is also a strong constraint on the use of recycled materials mainly due to the lack of technical/scientific information, which would relate their physical properties to their recycling cycle. This information should be used in the initial phase of the product design to serve as reference for the simulation of a project to point out the physical properties obtained from recycling the Projected material (Pm). Thus, it would be possible to foresee some recycling strategy to keep the good characteristics of recycled materials by encouraging their use, regardless of the product to be designed.Therefore, the Recycling Cycle of Materials (RCM) is a tool that provides scientific/technical support in the selection of materials. It uses the information related to the physical properties of the Pm as a parameter for product design after five recycling cycles. For the case study, this tool has been applied to obtain the basic material of ABS/PC blend. Subsequently, this blend was evaluated using DSC, FTIR, traction and impact methods to obtain delimiting data for the definition of the mechanical properties resulting from the application of RCM.     

一款用于无线通信系统的小型滤波器天线

目的设计一款适用于现代无线通信系统小型的滤波器天线。方法由一微带开口环谐振器、一段耦合线和一个Г型天线组成一款滤波器天线。这个Г型天线由耦合线激励,在设计中起着导纳变换器的作用。Г型天线不仅起着辐射的作用,同时也是滤波器最后一个谐振器,使滤波器和天线之间基本没有损耗,在仿真调试后,加工成实物进行测试。结果该滤波器天线在反射系数S11<-10 dB的阻抗带宽有12.7%(2.36~2.68 GHz),滤波器天线具有平坦的通带,通带内的最大差异为0.84 dB。滤波器天线通带外增益不到-15 dBi,这说明滤波器天线具有很好的带外抑制性。结论设计的滤波器天线通带内天线增益较为平坦,且拥有良好的带外抑制特性、滤波与辐射特性,并且损耗很低,很适合用于现代无线通信系统的射频前端。     

半干法脱硫配套布袋除尘器的特殊要求

由于半干法脱硫工艺对布袋除尘器的特殊要求,使得其配套的布袋除尘器构造不同于以往常规的布袋除尘器.从布袋除尘器的过滤风速、滤料选择、沉降室设置、布风均匀性、灰斗特性、旁路系统的要求做详细的说明.     

电袋复合除尘技术在燃煤电厂中的应用

电袋复合式除尘技术综合了电除尘和布袋除尘的收尘优点,通过除尘负荷的合理分配,实现了电除尘和布袋除尘的有机结合;采用基于表面过滤原理的新型滤料,可克服常规滤料清灰后除尘效率降低及滤袋易破损等缺点。电袋复合式除尘器在徐州坝山环保热电有限公司的应用实践表明,电袋复合式除尘器可保持高效稳定除尘同时节能,粉尘排放浓度达到了30 ...     

免烧粉煤灰陶粒作为BAF填料处理城市污水

以电厂粉煤灰为主要试验原料,辅以外加药剂(水泥、石灰、石膏、水玻璃),经混合、成球、陈化和养护等工序,制得免烧粉煤灰陶粒,并将其作为曝气生物滤池(BAF)工艺的载体填料处理城市污水.待挂膜启动成功后,考察了水力停留时间( HRT)、COD负荷、氨氮负荷对COD和氨氮去除效果的影响.实验结果表明:在温度为18～21℃、气...     

Experimental study on filtration and continuous regeneration of a particulate filter system for heavy-duty diesel engines

This study investigated the filtration and continuous regeneration of a particulate filter system on an engine test bench, consisting of a diesel oxidation catalyst（DOC） and a catalyzed diesel particulate filter（CDPF）. Both the DOC and the CDPF led to a high conversion of NO to NO2 for continuous regeneration. The filtration efficiency on solid particle number（SPN） was close to100%. The post-CDPF particles were mainly in accumulation mode. The downstream SPN was sensitively influenced by the variation of the soot loading. This phenomenon provides a method for determining the balance point temperature by measuring the trend of SPN concentration.     

鞍钢钢绳厂生产污水处理的工艺设计及运行效果

本文介绍了鞍钢钢绳厂生产废水处理工艺,包括沉淀系统、气浮系统、砂滤罐过滤系统。通过试验确定p H为11时,沉淀系统对Zn2+的去除率达到98.4%。通过正交试验确定当PAC用量为20 mg/L、PAM用量为2 mg/L、p H 7.5、气浮压力为1.2 Mpa时气浮系统对钢绳厂废水中SS、石油类、COD的去除率分别达到90%、70%、70%。经过砂滤罐过滤系统后废水中的SS为20 mg/L、石油类为2 mg/L、COD为48 mg/L,其去除率分别达到94%、78%、80%。     

我国人为源气态活性氮排放时空变动特征分析

随着粮食和能源需求的增加,农业生产和化石燃料燃烧带来的活性氮污染越来越成为影响我国环境和人民健康的重要因素之一.通过对2000、2005及2010年全国31个省(直辖市、自治区)的人为源气态活性氮排放总量、单位GDP及单位人均排放量的Moran's I指数和GetisOrd G*i指数进行空间分析,探讨了气态活性氮排放及其强度的时空变动特征.结果表明,全国的气态活性氮排放及其强度呈现明显的空间集聚特征.在空间分布特征上,全国活性氮排放表现为高值集聚分布,其热点主要位于华北平原和长江中下游平原地区;排放强度方面则为高值聚集和低值聚集兼备.通过对3个年份的冷热点比较分析发现,排放强度的冷点地区变化较小,热点地区变化较大.其中,单位GDP排放强度方面,冷点地区处于东南沿海地区,热点地区则由西北地区缩小到四川、甘肃两省;而单位人口排放强度方面,冷点地区范围有所缩减,热点地区则由分散转变为集中分布于京津冀及周边的山西、内蒙古和辽宁等.分析人为源气态活性氮时空分布格局和特征及其形成原因,可为评估和减缓气态活性氮排放对生态环境的影响提供科学基础.