Modeling the current-voltage characteristics of thin-film silicon solar cells based on photo-induced electron transfer processes

Power conversion efficiency of p-i-n type microcrystalline silicon (c-Si:H) solar cells has been analyzed in terms of sequential processes of photo-induced electron transfer. The effect of the excitonic state on the charged carrier generation has been studied compared to a conventional scheme in which only charged carriers are taken into account for the operation of the solar cells. A numerical model has been developed to calculate current-voltage characteristics of solar cells on the basis of two types of charged carrier generation processes (exciton process and charged carrier process). The light trapping effect due to a textured back surface reflector (BSR) was embedded in the numerical model by using the effective medium theory in combination with the matrix method in the field of the electromagnetic theory of light. As an application of this modeling, it was found that the reported data of the power conversion efficiency were not explained by the conventional charged carrier process model and that the combined model of the charged carrier process with the exciton process well explains the performance of the p-i-n type c-Si:H solar cells. In this way, the typical power conversion efficiencies were estimated to be 10.5% for the device (i-layer thickness: 1.8 m) with the BSR (period: 600 nm; height: 250 nm) and 8.6% for the device with the flat reflector under the condition that the fractions of the exciton process and charged carrier process were 60% and 40%, respectively.     

Modeling the current-voltage characteristics of thin-film silicon solar cells based on photo-induced electron transfer processes

Power conversion efficiency of p-i-n type macrocrystalline silicon (µc-Si:H) solar cells has been analyzed in terms of sequential processes of photo-induced electron transfer. The effect of the excitonic state on the charged carrier generation has been studied compared to a conventional scheme in which only charged carriers are taken into account for the operation of the solar cells. A numerical model has been developed to calculate current-voltage characteristics of solar cells on the basis of two types of charged carrier generation processes (exciton process and charged carrier process). The light trapping effect due to a textured back surface reflector (BSR) was embedded in the numerical model by using the effective medium theory in combination with the matrix method in the field of the electromagnetic theory of light. As an application of this modeling, it was found that the reported data of the power conversion efficiency were not explained by the conventional charged carrier process model and that the combined model of the charged carrier process with the exciton process well explains the performance of the p-i-n type μc-Si:H solar cells. In this way, the typical power conversion efficiencies were estimated to be 10.5% for the device (i-layer thickness: 1.8 μm) with the BSR (period: 600 nm; height: 250 nm) and 8.6% for the device with the flat reflector under the condition that the fractions of the exciton process and charged carrier process were 60% and 40%, respectively.     

吹扫捕集气质联用法测定水中4种挥发性有机物

建立了吹扫捕集气相色谱质谱联用法测定水中吡啶、丙烯腈、四乙基铅和松节油的方法,对吹扫时间进行了优化,研究了pH值对吹扫捕集率的影响。结果表明,在pH值为6¹0时,吹扫时间为11 min时吹扫捕集效率最高,用脉冲控制自动进标样的方法绘制工作曲线,曲线相关系数在0.99610时,吹扫时间为11 min时吹扫捕集效率最高,用脉冲控制自动进标样的方法绘制工作曲线,曲线相关系数在0.996⁰.999 9之间,方法的检出限在0.060.999 9之间,方法的检出限在0.06¹.0μg/L之间,相对标准偏差在1.1%1.0μg/L之间,相对标准偏差在1.1%⁶.2%之间,方法具有很好的线性和精密度。方法用于地表水、生活污水和化工废水中吡啶、丙烯腈、四乙基铅和松节油测定,并进行了加标回收实验,地表水回收率在86.8%6.2%之间,方法具有很好的线性和精密度。方法用于地表水、生活污水和化工废水中吡啶、丙烯腈、四乙基铅和松节油测定,并进行了加标回收实验,地表水回收率在86.8%¹12.1%之间,生活污水回收率在91.9%112.1%之间,生活污水回收率在91.9%⁹9%之间,废水回收率在82.2%～104.3%之间,表明方法具很好的准确度,可用于地表水、生活污水和化工废水中吡啶、丙烯腈、四乙基铅和松节油测定。     

乳化油在汽车发动机上的应用及探讨

本文对乳化油的乳化性能和在汽车发动机上的发展现状进行了探讨,分析对比了混合燃料的优缺点。研究表明：汽车发动机燃用乳化油可提高热效率,有效降低NOx及碳烟排放,但动力性略差,CO排放有所增加。最后阐述了我国乳化油未来发展优势。     

二氧化碳驱油工艺中油酸咪唑啉对碳钢的缓蚀行为研究

目的 研究CO2驱油工艺中咪唑啉缓蚀剂对油套管P110钢腐蚀的缓蚀机制与规律。方法 模拟长庆油田CO2驱工艺环境为实验条件,采用失重挂片、电化学测试、微观表征等手段,研究油酸咪唑啉缓蚀剂对P110碳钢的腐蚀抑制行为。结果 P110钢的腐蚀速度随着CO2分压的升高而增大,但是增大幅度不明显。当CO2分压为2、6 MPa时,油酸咪唑啉对P110钢腐蚀具有显著的抑制效果,缓蚀效率均超过98%,试片表面基本完整;当CO2分压升高到8 MPa时,油酸咪唑啉的缓蚀性能明显下降,缓蚀效率仅为64.33%,试片表面存在明显的腐蚀特征。结论 CO2分压升高到8 MPa时,P110钢表面携带过剩的正电荷,不利于油酸咪唑啉缓蚀剂的吸附。     

高性能聚醚醚酮紫外光加速老化行为研究

目的 研究特种工程塑料聚醚醚酮(PEEK)在紫外光照射实验室加速条件下的老化行为。方法 对PEEK塑料采取紫外线光老化方式进行试验,对老化前后的样品进行外观变化、力学性能、热性能、微观结构表征与分析,明确紫外环境因素对材料的性能影响,进而确定PEEK塑料在紫外光条件下的老化行为。结果 随着紫外光老化时间的增加,PEEK样品表面变黄,颜色加深,出现鼓包与裂纹等宏观与微观损伤。样品内部力学性能、热性能、红外特征吸收峰、元素含量与价态没有明显变化,样品表面热性能下降,傅里叶变换衰减全反射红外光谱(ATR-FTIR)特征吸收峰变化明显。结论 PEEK塑料表面对紫外光比较敏感,在紫外光的照射下容易发生表层的分解,短时间内不会引起材料整体热性能及力学性能的明显变化。     

新版排污许可证对油品销售企业的影响分析

介绍了新版排污许可证的主要特点和对油品销售企业全面覆盖的实现方式,阐明油品销售企业排污许可证申报类型和依据,从6个方面介绍了油库、加油站取得排污许可证后遇到的相关问题并列举部分例证,分析问题产生的根本原因,提出改进建议。     

低温热解油厌氧消化产甲烷条件研究

对低温热解油的厌氧消化条件进行研究,包括新鲜接种污泥的驯化,热解油厌氧消化条件的影响因素和生物质热解参数对最终厌氧消化的影响.通过控制不同热解参数及厌氧发酵参数的方法对耦合过程进行研究.结果表明,新鲜接种污泥经过驯化可以显著提升其对热解油中抑制物的耐受性,进而大幅提升热解油厌氧消化的甲烷产量.中温的培养条件更适合浓度为4%的热解油厌氧消化甲烷化,而高温的培养条件更适合浓度为10%的高浓度热解油.此外,0.85mm生物质粒径、300℃热解温度在下游的消化阶段有更高的甲烷产量.     

基于无人机可见光影像的绿色植被提取

在分析健康绿色植被光谱特性及无人机可见光影像典型地物各波段像元值差异的基础上,提出一种综合利用红、绿、蓝3个可见光波段信息的新型绿色植被指数——差异增强植被指数（DEVI）.利用该指数及其他8种常见可见光植被指数结合不同阈值方法提取研究区域绿色植被信息,并采用地表真实感兴趣区和基于SVM的监督分类方法进行精度量化评价.结果表明：由DEVI计算的植被指数灰度影像直方图具有良好双峰形态,可利用双峰直方图阈值法快速确定阈值,且阈值一般位于0.9~1之间;同时,DEVI提取精度明显优于其余8种植被指数,且采用双峰直方图阈值法时,总体精度为98.98%,Kappa系数为0.9791,相对误差为1/83.为验证DEVI是否具有良好的可适用性及可靠性,选取3种典型植被覆盖区域进行可行性验证,结果表明：利用DEVI可高精度提取建筑密集区域和植被零散分布区域的绿色植被信息,总体精度分别为98.42%和98.56%,Kappa系数分别为0.9610和0.9635,相对误差分别为1/125和1/91;而植被集中分布区域提取精度略低于上述2种典型区域,总体精度为97.40%,Kappa系数为0.9371,相对误差为1/53.因此,提出的差异增强植被指数——DEVI可以有效、高精度、低成本提取不同植被覆盖典型区域无人机可见光影像中的绿色植被信息,为陆地生态系统中的绿色植被监测研究提供一种可行性方法.     

氯/氯胺和紫外顺序消毒对管网抗性基因的去除

为探究供水系统中氯/氯胺与低压紫外顺序消毒对抗生素抗性基因(ARGs)分布特征的影响,采用生物膜反应器模拟供水管网,对管网出水和生物膜进行60mJ/cm²低压紫外线(254nm)消毒,并利用高通量定量PCR技术检测模拟管网进、出水及生物膜内的典型ARGs和遗传原件(MGEs).结果表明,管网反应器运行150d,氯和氯胺管网出水ARGs总相对丰度分别为0.13和0.137,生物膜ARGs分别为2.45和0.277,表明供水管网中低剂量的氯或氯胺可有效降低水相和生物膜相中ARGs的相对丰度达90%,且氯胺消毒对生物膜中的ARGs控制作用更显著.氯和氯胺消毒后管网出水再经低压紫外线照射后,ARGs相对丰度分别为0.0682和0.0537,管网生物膜中ARGs的相对丰度分别为2.01和0.194.ARGs与MGEs间的相关性发生显著变化,转座子与strB和mepA的相关性增强,与ermX和tetM相关性减弱,而整合子与acrF、cmlA1-01、oprJ及tolC-01的相关性增强.研究表明,将紫外线消毒工艺设置在用水终端可以显著降低氯和氯胺管网水中ARGs丰度,但对管网生物膜中的ARGs影响较小.