An interactive simulation model of urban ecosystem and its implementation

An interactive simulation model is established based on the methodology of "sensitivity model" (SM) during the cooperative research process between the founders of SM and the authors. And the conceptual framework of SM is developed into the interactively qualitative and quantitative simulation model presented in this paper, which makes it possible to break down a complex urban ecosystem into simple and visual quantitative or qualitative relationships between the factors. By studying the dynamic responses of the system to the changes of the inputs and parameters of the model, future trends in urban development can be predicted and strategies formulated. The whole process is realized on micro-computer in the course of man-computer interaction. Its potential use is shown in a case of Tianjin City.     

OPTIMAL MANAGEMENT OF RELIEF WELLS NEAR WATERTON RESERVOIR1

ABSTRACT: This study considers the design and analysis of nonpumped well systems to provide pressure relief in the Cochrane aquifer, which is hydraulically connected to the Waterton Reservoir, Analyses of the relief well management problem are performed with a management model formulated by the combined simulation-optimization approach. The model determines active relief well sites and their optimal discharge schedules. The existing relief wells are inadequate to provide the desirable pressure relief. The locations and design capacities of two new relief well systems are determined by the management model. The relationships between reservoir level and well discharge are estimated for these two well systems.     

攀枝花市空气监测优化布设的方法

在分散成若干片区、地形复杂的工业城市进行空气监测优化布设时,应先确定测点所在的片区。优化时必须考虑地形和气象特点、污染源的分布和片区的功能特征。再根据片区内主要污染物及源分布确定决策团子。优化时再考虑片区内的污染气象条件,采用适当的空气扩散模式和动态模拟的方法。经过夏、秋两季实测结果证明,优化的测点代表性良好。     

Multiple-resource modeling as a tool for conservation: Its applicability in Mexico

The current Mexican environmental law provides the legal basis for comprehensive land-use planning. Under the law, development of natural ecosystems must combine goals, policies, and practices towards the sustainable use of natural resources and the protection of biological diversity. Thus, ecosystem manipulation must be able to counter fragmentation of natural ecosystems and isolation of natural reserves, while providing for human needs. Assessment of the potential of natural ecosystems and management impacts are required. Multiple-resource simulation is an assessment and land-use planning tool that permits managers and decision makers to comply with the law, providing a flexible, user-oriented system that can meet the needs of managers, conservationists, and researchers. A multiple-resource model and an example of how it can be applied to meet planning needs is presented for discussion.     

差厚贴合减振钢板成形性的数值模拟研究

采用有限元软件MSC.Marc基于更新拉格朗日的弹塑性本构方程,对减振钢板的拉深变形进行了数值模拟。模拟得出了变形过程中的应力应变状态和错动量分布。通过改变内外两层钢板的厚度比,分析了差厚贴合对减振钢板拉深变形错动量的影响。为减振钢板的设计和应用研究提供了可靠的理论依据。     

上海市在用车监测与维修制度探讨

根据上海市机动车辆的管理现状，提出上海市在用车I/M制度体系网络、监测方法、数据收集网络与“通过/不通过”排放限值方面的基本设想，为建立一个真正有效的在用车监测与维修制度提供依据。     

抚顺市空气污染预报方案筛选

空气污染预报的准确性取决于大气污染物扩散模型的选取和预报方案的设计。本文以经过验证的ADMS-大气污染物扩散模型为基础。设计了四种预报方案。并对四种方案的预报准确性进行检验，从而筛选出了适用于抚顺市空气污染特点的最佳预报方案。     

城市污水处理厂动态模拟研究

利用活性污泥1号模型。对采用A/O工艺的上海某城市污水处理厂的碳化、硝化、反硝化过程进行计算机动态模拟，结果表明，出水中的TCOD、TN与污水处理厂的出水基本吻合，说明利用活性污泥1号模型对城市污水处理厂进行模拟是可行的。并根据模拟结果建议该厂运行过程中应降低A段的溶解氧。     

城市污水处理厂Web决策支持中心的设计与开发

研究开发了基于Web的城市污水处理厂决策支持系统(模拟系统、专家系统、培训系统),实现了决策支持中心的思想。介绍了城市污水处理厂Web决策支持中心的设计思想,以及利用.NET技术,以单机版决策支持系统为基础进行软件开发的方法。同时讨论了开发城市污水处理厂决策支持中心的意义,以及在本研究基础上进行深入科研工作的前景。     

用计算机模拟送进角与辗轧角对Accu-Roll轧机变形区的影响

在建立Accu-Roll轧机变形区模型的基础上,开发出计算机模拟软件,可方便地通过变形区纵剖面计算机图象显示分析工艺参数对变形区的影响,从而为合理地选取与优化工艺参数提供依据。