化学沉淀法强化常规工艺应急去除水中的镉

在常规工艺基础上,通过投加氢氧化钠,实验进行了应急去除重金属镉的研究。实验结果表明,该方法能有效去除饮用水水源的镉,效果稳定,可进行应急处理。对pH、镉初始浓度和混凝剂投加量3个影响因素的灰色关联分析表明,3个因素对镉去除效果影响的大小排序为:滤后水pH>混凝剂投加量>镉初始浓度。在水源镉突发污染时,在原有常规水处理工艺基础上,通过控制滤后水pH可实现对重金属镉的去除,pH的控制值与水源水质有关。     

Acute and chronic toxicity of organophosphate monocrotophos to Daphnia magna

The acute and chronic toxicity of monocrotophos (MCP), the binary joint toxicity of MCP and bifenthrin (BF), and sodium dodecyl benzene sulfonate (SDBS) to Daphnia magna (D. magna) was evaluated. The 24 h-median effective concentration (24 h-EC₅₀) and 48 h-median lethal concentration (48 h-LC₅₀) of MCP towards D. magna were 161 and 388 μ g/L, respectively. In addition, the lowest-observed effective concentration (LOEC) and non-observed effective concentration (NOEC) of MCP to D. magna were 10 and 5 μ g/L, respectively. Furthermore, the chronic value (ChV) of MCP against D. magna was 7 μ g/L and the acute chronic ratio (ACR) was 55. The number of offspring per female and the intrinsic rate of natural increase (r) were identified as the parameters that were most sensitive to MCP. In addition, toxic unit (TU) analysis was employed to evaluate the joint toxicities. The calculated TU_mix values of binary equitoxic mixtures of MCP + BF and MCP + SDBS were 1.47 and 1.63, respectively, which suggests that both equitoxic mixtures exert a limited antagonistic effect. The results of this study revealed that the toxic threshold of MCP towards D. magna is higher than its reported highest residue (4 μ g/L) in the ordinary aquatic environment, and that concurrent exposure to BF or SDBS may exert a slight antagonistic effect.     

Photolysis of the herbicide bispyribac sodium in aqueous medium under the influence of UV and sunlight in presence or absence of sensitizers

The photolysis of a rice herbicide Bispyribac sodium (Sodium 2, 6-bis [(4, 6-dimethoxypyrimidin-2-yl) oxy] benzoate) has been studied in different aqueous medium (distilled water, pond water and Irrigation water) under the influence of UV (λ max ≥ 250 nm) and sunlight in presence or absence of sensitizers (TiO₂ and KNO₃). The study was conducted under laboratory simulated condition which made it possible to evaluate the contribution of different factors viz. source of irradiation, solvent and sensitizers towards the photolysis of bispyribac sodium. The photodegradation proceeds via first order reaction Kinetics in all the cases. Five photo metabolites (M₁-M₅) were isolated in pure form by column chromatographic method from the irradiation system under UV influenced and TiO₂ as sensitizer. From the different spectral data (IR, NMR, UV-VIS, Mass) the structure of these five metabolites were assigned as M₁ (Phenol), M₂ [2, 6-Dihydroxy benzoic acid], M₃ [2, 6-bis [(4, 6 dimethoxypyrimidin-2yl) oxy] benzoic acid], M₄ [2-(3-Hydroxy-phenoxy)-pyrimidine-4, 6-diol] and M₅ as [2,4-Dihydroxy-3, 5-dimethoxy-6-(4-methoxy pyrimidine-2-yloxy)-benzoic acid]. Moreover, another six photometabolites (M₆-M₁₁) were identified from the different irradiation system on the basis of Micromass analysis. On the basis of MS/MS data analysis, the structure of these six photometabolites were assigned as M₆ [2-(4, 6-Dimethoxy-pyrimidin-2-yloxy)-6-hydroxy-benzoic acid], M₇ [2-Hydroxy-6-(4-hydroxy-6-methoxy-pyrimidin-2-yloxy)-benzoic acid], M₈ [4, 6-Dimethoxy-pyrimidin-2-ol], M₉ [6-Methoxy-pyrimidine-2, 4-diol], M₁₀ [2-Hydroxy-6-(pyrimidin-2-yloxy)-benzoic acid] and M₁₁ [2, 4, 6-Trimethoxy-pyrimidine]. The plausible Photodegradation pathways of bispyribac sodium in the present investigation were portrayed which proceeds via hydrolysis, hydrolytic cleavage, O-dealkylation, decarboxylation, dehydroxylation, O-alkylation and hydroxylation.     

Study on the removal of NOx from simulated flue gas using acidic NaClO2 solution

The study on the removal of NOx from simulated flue gas has been carded out in a lab-scale bubbling reactor using acidic solutions of sodium chlorite. Experiments were performed at various pH values and inlet NO concentrations in the absence or presence of SO2 gas at 45℃. The effect of SO2 on NO oxidation and NO2 absorption was critically examined. The oxidative ability of sodium chlorite was investigated at different pH values and it was found to be a better oxidant at a pH less than 4. In acidic medium, sodium chlorite decomposed into C102 gas, which is believed to participate in NO oxidation as well as in NO2 absorption. A plausible NOx removal mechanism using acidic sodium chlorite solution has been postulated. A maximum NOx removal efficiency of about 81% has been achieved.     

一株苯酚降解菌的分离鉴定及响应面法优化其固定化

从太原市焦化厂废水活性污泥中分离、筛选出一株苯酚降解细菌,经生理生化反应和16S rRNA鉴定,该菌株为Diaphorobacter属细菌,命名为PD-07.代谢机制研究表明,苯酚可诱导该菌合成邻苯二酚2,3-加氧酶降解苯酚.为了提高该菌株对苯酚的降解率,以海藻酸钙为材料,对该菌株进行包埋固定化研究.首先采用Plackett–Burman实验设计筛选出影响固定化菌株苯酚降解率的关键因素,然后采用最陡爬坡实验逼近最大苯酚降解率响应区域.最后用Box–Behnken实验设计及响应面回归分析,应用二次方程对实验数据进行拟合得,拟合曲线与实验实测值相关性良好,最佳条件为海藻酸钠浓度3.83%(m/V)、CaCl2 0.3mol/L、菌胶比1:26.73、固定化时间2h、摇床转速180r/min、培养温度30℃、初始pH值7.2、液固比4.86:1,在此条件下苯酚降解率可达96.89%.     

腐殖酸钠和表面活性剂对黄土中石油污染物解吸增溶作用

选用十二烷基苯磺酸钠(LAS)、十二烷基硫酸钠(SDS)和十二烷基磺酸钠(SAS)对污染的土壤进行解吸实验,研究了这3种阴离子表面活性剂和腐殖酸钠对黄土中柴油类污染物的协同增溶作用.结果表明,腐殖酸钠和3种阴离子表面活性剂对黄土中柴油的解吸均有显著增溶作用,使柴油的解吸量明显增加,柴油的去除率最高可达63%.SDS对柴油的解吸量随腐殖酸钠浓度增大呈线性增加关系;但腐殖酸钠浓度增加对 LAS和SAS的解吸曲线有突越点,超过此浓度后反而会抑制解吸作用.     

型煤燃烧固硫的钠离子效应

本文用脉冲二氧化硫荧光分析仪连续测试了煤样中二氧化硫的浓度，并用Ｘ荧光、Ｘ衍射和电子扫描电镜等方法，分析了添加钠离子样品的含硫率、物相及表面形貌。实验结果表明，钠离子添加剂改变了二氧化硫释放过程，抑制了硫酸钙的分解。灰样成分中既有稳定的三元化合物３ＣａＯ．３Ａｌ２Ｏ３．ＣａＳＯ４，也有不稳定的化合物硫酸钙存在，说明钠离子添加剂对提高固硫率有促进作用。     

次氯酸钠氧化脱除黄磷尾气中的硫、磷杂质

采用次氯酸钠氧化工艺净化黄磷尾气，在次氯酸钠溶液中有效氯的质量分数为0．65％，PH为9、反应温度为285K，气体流速为0．6-0.8L/min的条件下，对尾气中H2S、PH3的脱除率分别达到99．9％，和99．8％，出口含量分别小于0.2mg/m^3和7mg/m^3，对有机硫也有30％的脱除能力。     

顶空气相色谱法测定食品中甜蜜素含量

采用顶空气相色谱法测定食品中甜蜜素含量,探讨了气液相平衡条件及色谱条件的选择,实验结果表明甜蜜素的标准溶液在0.1-0.4μg/l范围内具有良好的线性关系,回收率为87.5%-101.8%,相对标准偏差为2.6%.     

以不同底物和苯胺为燃料的微生物燃料电池的产电特性

通过构建空气阴极型双室微生物燃料电池,研究了以500 mg/L苯胺作为唯一燃料以及苯胺和不同底物共基质时MFC对苯胺的降解特性及MFC的产电性能。结果表明,在外电阻1000Ω,以500 mg/L苯胺为唯一燃料以及500 mg/L苯胺分别和500 mg/L乙酸钠,葡萄糖和可溶性淀粉作为共同基时的MFC运行周期分别为3、3.4、4.6和5 d;最大输出电压分别为273、450、428和380 mV;输出功率分别为142、225、201和160 mW/m2。苯胺去除率分别为68%、85.8%、71%和65%。内阻分别为931、524、564和751Ω,COD去除率分别为68%、85%、72%和65%。库伦效率分别为1.8%、7.9%、6.6%和4.5%。MFC可以使用苯胺作为唯一燃料,且当添加的基质不同时,MFC产电性能以及苯胺降解状况有所不同。利用MFC可以使苯胺高效快速降解的同时实现稳定的电压输出。