洛河氰化钠翻车事故应急处理效果技术分析

分析了洛河氰化钠事故污染动态和应急处理效果 ,并对河流突发污染应急处理措施进行评价。总结了有效的河流突发污染事故应急处理方法 ,为今后河流污染事故的紧急处理提供借鉴。     

THE EFFECTS OF DEICING SALTS ON WATER CHEMISTRY IN PINHOOK BOG,INDIANA1

ABSTRACT: A five-year study was conducted to identify the effects of road salt intrusion on the water chemistry of Pinhook Bog following operation of an uncovered salt storage pile adjacent to the bog for ten years. A distinct pattern of elevated salt concentrations was observed in the interstitial waters of the surface peat that corresponded to observed alterations in the bog vegetation. Yearly mean salt concentrations as high as 468 mg/l sodium and 1215 mg/l chloride were recorded in the plant root zone of the peat mat. The salt concentrations decreased significantly each year from 1979 to 1981 throughout the impacted area. Some increases of a lesser magnitude occurred in 1982 and 1983. Analysis of salt movements suggested that vertical transport by water movement was responsible for concentration changes. The major declines in salt levels occurred in the spring following snowmelt and heavy precipitation events. Evapotranspiration during periods of drought resulted in the gradual increases in surface peat salt concentrations. Diverted highway runoff was shown to be the major continuing source of sodium chloride contamination and was the likely source of the elevated calcium, magnesium, potassium, bicarbonate, and pH levels also observed in the impacted area.     

高铁酸钠电化学合成条件的研究

利用含铁材料为阳极，铜为阴极，NaOH溶液为电解液，于隔膜电解槽中电解制备高铁酸钠。探索了该工艺所必需的各种参数和反应条件，确定了隔膜材料，并对Na2FeO4浓度和电流效率的非一致性变化作出了解释。研究结果表明：在阳极距离为1．3cm（极距2．3cm）、阳极电解液浓度为14mol／L，阴极电解液浓度为4mol／L、温度为35℃、电压为8～9V时，电解2h后得到的Na2FeO4浓度为18．7g／L，电流效率为20％。     

鞭式节丛孢(Arthrobotrys flagrans CBS583.91)对氯化钠和氯化镉的耐受性

首次报道了鞭式节丛孢的氯化钠和氯化镉耐受性,在查氏平板上培养39d，鞭式节丛孢对氯化钠的最高耐受浓度为0．6mol L^-1，对氯化镉的最高耐受浓度为3．0mmol L^-1；在LCMA平板上，0．18mol L^-1氯化钠抑制三维菌网的形成，0．30mol L^-1氯化钠抑制厚垣孢子的萌发，0．05mmol L^-1氯化镉抑制三维菌网形成，0．07mmol L^-1氯化镉抑制厚垣孢子萌发．图1表3参8     

二价铁催化过氧化氢-过硫酸钠再生活性炭可行性研究

利用二价铁(Fe~(2+))催化过氧化氢(H_2O_2)-过硫酸钠(Na_2S_2O_8)双氧化体系(ICHP)对被三氯乙烯(TCE)吸附饱和的20~40目粒状活性炭(AC)进行再生研究.同时,结合扫描电子显微镜(SEM)、能量散射光谱仪(EDS)、X射线光电子能谱仪(XPS)及氮气吸附-解吸技术等手段对再生前后的AC进行表征,进一步探讨影响再生效率的原因.结果表明,AC对TCE的吸附符合准一级动力学模型,等温吸附符合Freundlich模型.在TCE∶Fe~(2+)∶H_2O_2∶S_2O_2-8=1∶9.20∶59.79∶77.52(物质的量比)的条件下,AC再生效率约为50%.研究表明,AC的炭损失、比表面积、孔隙体积及孔隙面积的减小,是再生AC吸附能力低于原状AC的主要原因.利用ICHP再生的AC可以实现对TCE的有效吸附并达到AC重复使用的目的,具有很好的实用价值.     

Fuel cell system with sodium borohydride hydrogen generator for small unmanned aerial vehicles

A 100 W proton exchange membrane fuel cell (PEMFC) system with a sodium borohydride (NaBH₄) hydrogen generator was investigated for small unmanned aerial vehicles (UAVs). The performance of a cobalt–phosphorous/nickel foam catalyst was evaluated to determine the change in catalytic activity under real operating conditions. The response time increased owing to oxidation of the metals and accumulation of sodium; however, the catalyst remained active at high reaction temperatures. A NaBH₄ hydrogen generator with the catalyst was developed for a 100 W PEMFC system. The hydrogen generation rate was stable for 3 h, and the conversion efficiency was 97.8%. Finally, a 100 W PEMFC system with the NaBH₄ hydrogen generator was investigated for small UAVs. The maximum power and energy density of the PEMFC system were 95.96 W and 185.2 Wh/kg, respectively.     

在模拟酸性海洋大气环境中锌缓蚀剂的研制

目的寻找有效抑制锌大气腐蚀的缓蚀剂配方。方法采用静态失重法、极化曲线法和交流阻抗法,研究模拟酸性海洋大气环境中,多聚磷酸钠单独使用以及分别与香草醛、碘化钾、硫脲复配使用时对锌腐蚀的缓蚀作用。结果多聚磷酸钠单独使用时对腐蚀介质中的锌具有较好的缓蚀作用,多聚磷酸钠与香草醛、碘化钾、硫脲之间有良好的协同缓蚀效应,最佳质量配比分别为3∶1,1∶2,1∶4。多聚磷酸钠以及多聚磷酸钠复配缓蚀剂属于混合抑制型缓蚀剂;它们能够在锌表面形成一层保护膜,从而抑制锌的腐蚀。结论寻找到的缓蚀剂配方能够有效抑制锌的大气腐蚀。     

活性炭生物转盘法处理化工废水

使用固定剂将颗粒状活性炭固定在盘片上，制成了一种新型生物转盘盘片——活性炭生物转盘盘片。采用一级微型生物转盘法处理模拟化工废水，对比了活性炭、石英砂、聚丙烯3种生物转盘的处理效果。实验结果表明，活性炭生物转盘对COD的去除效果好于其他两种转盘。在进水COD为600mg／L、水力停留时间为6h、盘片转速为4r／min的条件下，活性炭生物转盘对COD的去除率可达71．3％。此外，活性炭生物转盘还有较强的耐有机负荷冲击能力。在废水处理过程中，活性炭仅在挂膜的前7天起吸附作用，挂膜成功后生物降解起主导作用。     

Wet Strength and Water Resistance of Modified Soy Protein Adhesives and Effects of Drying Treatment

Soy protein isolate (SPI) was modified using sodium dodecyl sulfate (SDS) and guanidine hydrochloride (GuHCl). Adhesion performance of the modified SPI on fiberboard was studied. The Water-soluble mass of the modified SPI adhesives was examined following modified ASTM D5570. The SDS-modified SPI containing 91% protein had a water-soluble mass of 1.7%. To be considered a water-resistant adhesive, the water-soluble mass of adhesive should be less than 2%. The wet shear strength test showed 100% cohesive failure within fiberboard, indicating that the modified SPI has good water resistance. The effect of drying treatment on adhesion performance of the SDS-modified SPI on fiberboard was then investigated. Drying treatment significantly affected the final adhesion performance. Shear strength did not change much, but the percentage of cohesive failure within fiberboard increased markedly as drying temperature increased. All the unsoaked, soaked, and wet specimens glued by the adhesives treated at 70° or 90°C had 100% cohesive failure within fiberboard. Viscosity also increased greatly with an increase in drying temperature. This information will be useful in developing low-cost adhesive processing system in the future.     

粉煤灰对硫化钠烟气脱硫的影响研究

通过对烟气带入吸收系统的粉煤灰物理性质及化学组成的分析，研究了粉煤灰对硫化钠法烟气脱硫反应的可能影响，并对粉煤灰的去除工艺进行了探讨。