淀粉/凹凸棒粘土复合吸附絮凝材料的研究

采用接枝聚合法在硅烷化凹凸棒粘土(OATP)表面接枝淀粉,制备淀粉/凹凸棒粘土(ATP)复合吸附絮凝材料.采用傅里叶变换红外光谱(FT-IR)、扫描电子显微镜(SEM)对淀粉/ATP进行了表征,并对其制备条件进行了优化.结果表明,当淀粉质量分数(相对OATP质量)为100%,聚合反应时间为3 h,引发剂质量分数为0.003%,反应温度为60℃时,制备的淀粉/ATP对镉离子的最大吸附容量可达到36.78 mg/g.与ATP、OATP相比,淀粉/ATP对镉离子的吸附容量增大了2倍以上.复合材料具有比OATP更强的捕获能力,所形成的絮凝体大而密实,比淀粉絮凝剂具有更好的沉降性能.     

AJIC工艺处理木薯加工废水研究

采用AJIC工艺对木薯淀粉、变性淀粉、木薯酒精生产废水进行综合处理。结果表明:COD、BOD5和SS的去除率均高达99%,进水水质指标及水量处理后的废水水质可达到《农田灌溉水质标准》(GB 5084-2005)水作标准,符合国控重点污染源污染减排要求。此外,该工艺还同时实现对木薯废渣和污泥进行处理,可生产沼气595.2万立方米/年,有机肥400吨/年,实现直接经济效益422.9万元/年,具有较高的经济、环境和社会效益。     

聚乳酸/淀粉固体缓释碳源生物反硝化研究

以被硝酸盐氮污染的地下水为研究对象,利用共混/熔融聚合技术将聚乳酸和淀粉混合,制备成兼具碳源和生物载体的缓释碳.并考察不同质量比(聚乳酸∶淀粉为8∶2、7∶3、6∶4、5∶5)的缓释碳在反硝化间歇试验中硝氮、亚硝氮和COD的去除效果,结果表明,当聚乳酸/淀粉质量比为5∶5的缓释碳,其反硝化效果最佳,硝氮去除率达99%;以该比例的缓释碳进行反硝化填充柱连续动态试验时,反应器中反硝化效果显著,出水硝氮浓度在2 mg·L-1以下,为开发环境友好的可控性缓释碳源提供了科学依据.     

不同碳源对微生物修复石油污染土壤的促进作用

为解决石油污染土壤中以石油为唯一碳源的土著微生物生长缓慢的问题,研究了分别添加玉米淀粉、玉米粉、可溶性淀粉和葡萄糖4种碳源对土样细菌总量和石油烃降解率的影响。研究结果表明：玉米淀粉作为碳源时土样TN和TP的下降幅度均最大;添加玉米淀粉和玉米粉比添加可溶性淀粉和葡萄糖更有利于细菌的生长繁殖;细菌对直链烷烃化合物均具有较好的降解效果,但对较为复杂的芳香烃化合物降解效果较差。降解反应第40天时,分别添加玉米淀粉、玉米粉、可溶性淀粉和葡萄糖的石油烃降解率分别为67.25%、48.60%、46.30%和28.57%。     

Modification of Aliphatic Polyesters and Their Reactive Blends with Starch

Modified polycaprolactone was synthesized by melt reaction of PCL and reactive monomers such as glycidyl methacrylate (GMA) and maleic anhydride (MAH) in the presence of benzoyl peroxide in Brabender mixer. MAH showed a different grafting phenomenon compared to GMA. The reaction mechanism was discussed with different reactive monomers. Reactive blends of the PCL-g-GMA and the gelatinized starch with glycerin were prepared and their mechanical properties and biodegradabilities were investigated. Reactive blends of PCL-g-GMA and starch showed well-dispersed starch domain in the matrix and better mechanical strength than the unmodified PCL/starch blend. However, the reaction between PCL-g-GMA and starch induced a crosslinking during the reactive blending and this crosslinking in the blend lowered the biodegradation of the blend during the composting test. The biodegradability was investigated by the weight loss and surface morphology change of the blend in the composting medium.     

Dialdehyde starch and zein plastic: Mechanical properties and biodegradability

Dialdehyde starch (DAS) and zein, a hydrophobic corn protein, were investigated to produce biodegradable plastics with improved water resistance and mechanical properties. In the study, dialdehyde starch and zein ratio, plasticizers, and degree of starch oxidation were examined. Increased molding temperature and level of starch oxidation decreased water absorption of the plastic. Tensile strength and Young's modulus increased with starch oxidation. The biodegradation of starting materials and ground plastic specimens was studied in aerobic soil reactors maintained at 25°C for 180 days. Biodegradation of corn starch, zein, and dialdehyde starch for 180 days produced CO₂ equivalent to 64, 63, and 10% of theoretical carbon, respectively. Specimens of molded DAS and zein (3 : 1) plastic showed accelerated CO₂ evolution compared to DAS and other raw materials alone. By 180 days, specimens made with starch of low oxidation (1 and 5% oxidized) demonstrated a 60% biodegradation, and specimens with highly oxidized starch (90% oxidized) achieved 37% biodegradation.Paper presented at the Bio/Environmentally Degradable Polymer Society—Third National Meeting, June 6–8, 1994, Boston, Massachusetts.Journal Paper J-15927 of the Iowa Agriculture and Home Economics Experiment Station, Ames, Project No. 3258.     

Liquid crystallinity of levan/water/starch solutions

Transmitted light measurements performed with a UV-visible spectrophotometer were used to characterize how starch affects the position of boundaries on the phase diagram for dilute aqueous solutions of levan (a branched polymer of fructose). Data were collected in the range 15 to 70°C; the minimum concentrations required for separation of a nematic phase and the minimum concentration required for a fully nematic solution were identified within this range. While hard interactions (repulsion between rod-like molecular segments) dictate the formation of a liquid crystalline phase at and above ambient temperature in the absence of starch, soft interactions become more significant as solutions are cooled toward ambient when starch is present. Small amounts of starch might be used as a filler to modify the mechanical properties (while retaining the process-related benefits) of levan films cast from liquid crystalline solution.     

新型材料淀粉微球对Cu~(2+)、Cr~(3+)和Pb~(2+)的吸附机理研究

以可溶性淀粉为原料,在反相悬浮体系中合成N,N′-亚甲基双丙烯酰胺交联淀粉微球为载体,研究了新型吸附材料淀粉微球(cross-linked starch microsphere,CSMs)对Mn+(Cu2+、Cr3+、Pb2+)的静态吸附行为。利用扫描电镜、X射线衍射仪和红外光谱仪对微球及其吸附产物进行表征,分析讨论了3种金属原子结构,研究了吸附机理。结果表明:308K时,Cu2+、Pb2+和Cr3+的饱和吸附量分别是2.43、0.30和0.27 mmol/g,CSMs对Cu2+离子吸附能力最强,并且其通过物理吸附、配位吸附方式吸附Mn+,并得出引起微球吸附能力大小可能与金属离子电荷、离子半径和外层电子排布的差异因素有关。     

硅微粉的提纯实验研究

采用选择性絮凝法对硅微粉进行提纯处理,分别探索了分散剂、絮凝剂种类及用量、pH值和沉降时间等因素对提纯效果的影响,实验结果表明,当聚乙烯吡咯烷酮、油酸钠的投加量分别80 g/t和1 824 g/t硅微粉,体系pH5.3,沉降时间50 min时,硅微粉中二氧化硅的含量从74%提高到了90.9%,提纯效果显著。     

沸石负载淀粉对Pb2＋、Cu2＋和Ni2＋的吸附性能

将淀粉负载到沸石表面得到新型重金属离子复合吸附剂ZLS。分别从沸石与淀粉质量比、吸附温度、吸附时间、pH与重金属初始浓度不同方面考察了复合吸附剂ZLS吸附Pb^2＋、Cu^2＋、Ni^2＋的影响。实验结果表明：当沸石与淀粉质量比为10：1,pH为6,吸附温度在30℃时,复合型吸附剂ZLS对Pb^2＋、Cu^2＋和Ni^2＋3种重金属离子的吸附效果最好;吸附动力学研究发现,ZLS对Pb^2＋、Cu^2＋和Ni^2＋的吸附行为均符合准二级动力学以及颗粒内部扩散模型;等温吸附数据符合Fre-undlich模型,吸附状态属于多层吸附。