Trichoderma atroviride as a bioremediator of Cu pollution: An in vitro study

Isolated Trichoderma atroviride from Cu-polluted river sediment at the Serdang Industrial Area was studied under in vitro conditions to understand the mechanisms that allowed the fungi to thrive in the Cu-polluted freshwater ecosystem. From this study, adsorption was recognized as the main mechanism of Cu tolerance with 50–85% adsorption during the in vitro experiment. The uptake capacity of the isolate in liquid medium ranged from 0.8 to 11.2 mg g^?1 in the potato dextrose broth medium with increasing Cu concentrations from 25 to 300 mg L^?1. It was found that 2.7–5.0% of Cu was lost due to washing. The high percentage of Cu adsorption and the high uptake capacity of Cu by T. atroviride suggest that it is a potential bioremediator of Cu. However, further studies are needed to confirm its practical use as a bioremediating agent for Cu under field conditions.     

Adsorption and movement of carbaryl in soils: A verification of cosolvent theory and comparison of batch equilibrium and soil thin layer chromatography results

Batch equilibrium and soil thin layer chromatography (TLC) techniques were used to investigate the influence of different volume fractions of organic cosolvents (acetone and methanol) on the adsorption and movement of carbaryl in four different types of Indian soils. L-shaped isotherms were obtained for both the cosolvent–water mixtures at all f _s values and were in close agreement with the Freundlich equation. Higher adsorption was observed on F.R.I. soil (FSL) followed by Alampur soil (ASL), Kalai soil (KL), and Bhoran soil (BSL) at all f _s values for both the cosolvent systems as was anticipated from the K and K _D values. The K and K _D values also confirmed that carbaryl adsorption was higher in methanol–water mixture than acetone–water mixture and decreased with increasing f _s values. The frontal R _f values obtained from soil TLC studies were inversely proportional to the K and K _D values for both the cosolvent systems. The higher K and K _D values and lower R _f values in methanol–water mixtures relative to acetone–water mixtures for all the soils indicated that acetone had a greater potential for ground water contamination compared to methanol. The adsorption data were used to evaluate the cosolvent theory for describing adsorption of carbaryl in acetone–water and methanol–water mixtures. The aqueous phase partition coefficients, K _DW (mol g^?1), normalized with respect to f _oc for carbaryl was evaluated by extrapolating f _s → 0.     

Development and application of cross-linked polyethylenimine for trace metal and metalloid removal from mining and industrial wastewaters

Pollution of water bodies by trace metals is an established problem and several studies have been conducted to deal with it. South Africa is amongst those countries whose water systems are most affected as a result of intensive mining activities. This research was dedicated to the development of an insoluble chelating polymer for use as an adsorbent for abstraction of metal ions from mining and industrial wastewaters. Polyethylenimine (PEI), well known for its metal chelating potential, was cross-linked by epichlorohydrin (ECH) in order to convert it into a water-insoluble form for direct use as an adsorbent. The binding affinity of the cross-linked polyethylenimine (CPEI) to heavy metal ions was assessed as well as its ability to be regenerated for re-use. CPEI exhibited good complexation ability to metal ions with high affinity to Cr and most divalent metal ions. The observed order of complexation was: Cr?>?Zn>?Fe?>?Ni?>?Mn?>?Pb. On the other hand, it showed very poor ability to bind oxo-anions such as SeO₃ ^2? and AsO₂ ^? which has been attributed to the unavailability of suitable functional groups to interact with these ions.     

Application of Zr(IV) tungstate for removal of metal ions from aqueous solutions

A heteropolyacid Zr(IV) tungstate-based cation exchanger has been synthesized. An amorphous sample, prepared at pH 1.2 and having a Na⁺ ion exchange capacity of 0.92?meq?g^?1, was selected for further studies. Its physicochemical properties were determined using Fourier transform infrared spectrometer, X-ray diffraction, thermogravimetric, and scanning electron studies. To understand the cation exchange behavior of the material, distribution coefficients (K _d) for metal ions in various solvent systems were determined. Some important binary separations of metal ions, namely Mg²⁺–Bi³⁺, Cd²⁺–Bi³⁺, Fe³⁺–Bi³⁺, Th⁴⁺–Bi³⁺, and Fe³⁺–Zn²⁺, were achieved on such columns. The practical utility of these separations was demonstrated by separating Fe³⁺ and Zn²⁺ ions quantitatively in commercial pharmaceutical formulation. The cation exchanger has been successfully applied also for the treatment of industrial wastewater and a synthetic mixture. All the results suggests that Zr(IV) tungstate has excellent potential for the removal of metals from aqueous systems using packed columns of this material.     

Effects of β-cyclodextrin on adsorption and desorption of carbofuran in soils of divergent texture

Laboratory studies were conducted to determine the adsorption/desorption equilibrium of carbofuran between four divergently textured soils and distilled water and an aqueous solution of 0.01?mol?L^?1 β-cyclodextrin using a batch equilibrium technique. The determined adsorption isotherms for silt loam soils were of L-shaped, for sandy loam soil S-shaped, in agreement with a Freundlich isotherm. In the presence of β-cyclodextrin, the adsorption of carbofuran to the four soils was lower than with distilled water. Positive hysteresis was observed in all soils with distilled water, negative hysteresis when using a solution of β-cyclodextrin as desorbent. The results indicate the potential use of β-cyclodextrin for remediation of pesticide-contaminated soils.     

Granulation of gibbsite with inorganic binder and its ability to adsorb Mo(VI) from aqueous solution

In this study, we prepared a new adsorbent and evaluated its ability to adsorb Mo(VI). Gibbsite was granulated with colloidal alumina or colloidal silica. The amount of Mo(VI) adsorbed onto granular gibbsite with a binder, effect of contact time and pH on the adsorption of Mo(VI), and column experiments were investigated. The amount of Mo(VI) adsorbed was greater in the order of ST12 (colloidal silica, 12%)?相似文献   

Removal of Mo(VI) from aqueous solutions using sulfuric acid-modified cinder: kinetic and thermodynamic studies

Removal of Mo(VI) from aqueous solutions was investigated using cinder modified by sulfuric acid. Various parameters such as pH, agitation time, Mo(VI) concentration, and temperature have been studied. The maximum adsorption of Mo(VI) occurred at pH between 4.0 and 6.0. Kinetic studies showed that the adsorption generally obeyed a pseudo second-order model. The activation energy was 31.4?kJ?mol^?1, indicating that the adsorption process was governed mainly by interactions of physical nature. Furthermore, application of Langmuir and Freundlich isotherm models to the adsorption equilibrium data showed that the adsorption behavior obeyed the Langmuir model. The adsorption capacity was found to be 10.8?g Mo(VI)?kg^?1 adsorbent. Finally, thermodynamic parameters such as ΔH ⁰, ΔS ⁰, and ΔG ⁰ were also evaluated, which showed that the adsorption of Mo(VI) on the treated cinder was endothermic, entropy increasing, and spontaneous. In conclusion, the sulfuric acid-modified cinder was shown to be an inexpensive, effective, and simple adsorbent for the removal of Mo(VI) from water.     

1,3,5-triazine-triethylenetetramine polymer: an efficient adsorbent for removal of Cr(VI) ions from aqueous solution

The synthesis of 1,3,5-triazine-triethylenetetramine (TATETA), its characterization by infrared spectroscopy and elemental analysis, and its application for removal of Cr(VI) ions from aqueous solution is reported. The effects of pH, contact time, initial concentration of Cr(VI), sorbent dose, and temperature on adsorption were investigated and optimized by batch adsorption experiments. Adsorption was highest at acidic conditions with an equilibration time of 25 min. The adsorption followed a Langmuir model, with an adsorption capacity of 303 mg g^?1, was second order in its kinetics, and exothermic and thus spontaneous.     

Removal of congo red and basic violet 1 by chir pine (Pinus roxburghii) sawdust,a saw mill waste: batch and column studies

The efficiency of chir pine sawdust (CPS) for adsorptive removal of the dyes, congo red (CR) and basic violet 1 (BV), from aqueous solution was evaluated using batch and column studies. The equilibrium was attained in 60 min for CR and 45 min for BV. The adsorption of BV obeyed the Langmuir isotherm model while the Freundlich isotherm fitted the equilibrium data of CR adsorption. The Langmuir monolayer adsorption capacities (Q_o) of CPS for BV and CR were 11.3 and 5.8 g kg^?1, respectively. The kinetic data for CR were best fitted to the Lagergren pseudo-first-order model and for BV to the pseudo-second-order model. The intra-particle diffusion was found to be the rate-controlling step for CR adsorption, while the adsorption kinetics of BV were controlled by both intra-particle and liquid-film diffusion. The thermodynamic parameters indicated that the adsorption process was spontaneous and endothermic in nature. The adsorption activation energy (E_a) for CR (124 kJ mol^?1) implied chemical adsorption while that for BV (5.4 kJ mol^?1) indicated physical adsorption. An increase in the Thomas model constant (K_Th) with increasing flow indicated that for both dyes the mass transport resistance decreased during adsorption. Thus, CPS may be an efficient low-cost adsorbent for decolorization of dye-containing wastewaters.