35Cr2Ni4MoA材料表面碳化钨处理耐蚀性研究

目的对比研究35Cr2Ni4Mo A材料的传统镀硬铬和碳化钨WC-10Co-4Cr两种表面处理的耐蚀性能,方法开展35Cr2Ni4Mo A材料两种表面处理的实验室加速腐蚀环境试验,研究两种表面处理腐蚀行为特点。加速腐蚀试验共8个周期,通过蚀坑深度、腐蚀面积、单位面积腐蚀数量等描述35Cr2Ni4Mo A材料表面腐蚀情况。结果试验结果表明,35Cr2Ni4Mo A材料采用碳化钨WC-10Co-4Cr表面处理相较于传统镀硬铬表面处理的耐蚀性好。结论碳化钨WC-10Co-4Cr表面处理有效提高海洋环境下35Cr2Ni4Mo A材料表面耐蚀性能。     

城市污水厂MCR-1基因及其携带菌的污染

研究了南京某城市污水处理厂MCR-1基因及其携带菌的污染特征,从MCR-1的分布特征、影响因素及MCR-1携带菌的耐药特征等方面综合评价.结果发现MCR-1随处理流程丰度下降,去除率达83.6%,但其相对丰度在出水中显著升高,剩余污泥中含有高浓度MCR-1,浓度达2.88×10¹²copies/L.粘菌素耐药菌同样沿处理流程逐渐降低,出水降至53CFU/mL,去除率达99.98%,但在剩余污泥中浓度高达2.04×10⁵CFU/mL.相关性分析发现MCR-1丰度与氨氮含量呈正相关,而相对丰度与COD、总氮和硝酸盐含量呈负相关.耐药特征分析表明曝气池（CAST、MSBR）和曝气生物流化池（ABFT）中MCR-1携带菌可耐受较高浓度粘菌素,且污水处理使MCR-1携带菌对粘菌素的耐受能力提高.表明污水处理流程不但无法完全去除MCR-1及其携带菌,且导致耐药性风险提高.本研究可为评价污水中以MCR-1为代表的超级抗性基因的环境风险提供参考.     

Characterizing the antibiotic resistance genes in a river catchment: Influence of anthropogenic activities

Previous studies on environmental antibiotics resistance genes(ARGs) have focused on the pollution sources such as wastewater treatment plants, aquaculture and livestock farms,etc. Few of them had addressed this issue in a regional scale such as river catchment. Hence,the occurrence and abundances of 23 ARGs were investigated in surface water samples collected from 38 sites which located from the river source to estuary of the Beijiang River.Among them, 11 ARGs were frequently detected in this region and 5 ARGs(sul I, sul II, tet B,tet C, and tet W) were selected for their distribution pattern analysis. The abundances of the selected ARGs were higher in the upstream(8.70 × 10~6 copies/ng DNA) and downstream areas(3.17 × 10~6 copies/ng DNA) than those in the midstream areas(1.23 × 10~6 copies/ng DNA), which was positively correlated to the population density and number of pollution sources. Pollution sources of ARGs along the Beijiang River not only had a great impact on the abundances and diversity, but also on the distribution of specific ARGs in the water samples. Both sul I and sul II were likely originated from aquaculture farms and animal farms,tet W gene was possibly associated with the mining/metal melting industry and the electric waste disposal and tet C gene was commonly found in the area with multiple pollution sources.However, the abundance of tet B was not particularly related to anthropogenic impacts. These findings highlight the influence of pollution sources and density of population on the distribution and dissemination of ARGs at a regional scale.     

特厚煤层综放工作面多参量监测预警分析

根据某矿12220工作面特厚煤层综放开采,穿越F16逆冲断层的特殊情况,为保证安全生产及时提供预警信息,采用微震、钻屑量、支架阻力、地表变形多种监测手段综合分析回采过程中的参量变化规律。结果表明:微震活动的峰值能量周期约为3 d,回采间距约为4.5 m,且断层下盘较上盘的微震事件能量更集中;钻屑量的统计分析发现最大值出现在上巷下帮7～11 m和下巷上帮9～11 m范围内,划定该区域为巷帮高应力集中区,并将平均钻屑量3 kg/m作为黄色预警临界值,3.5 kg/m作为红色预警临界值;另外,根据支架前、后柱阻力变化情况,划定了2个连续变化的高压力区,发现在初撑力偏低,甚至不接顶、虚顶情况下,支架梁顶部煤体受自重和构造应力作用易发生准脆性受拉断裂破坏,且在穿越逆冲断层的回采过程中,支架阻力峰值呈现由中下部向上部转移的变化规律;最后,通过对地表走向、倾向测点的变形量数据进行统计分析发现,走向面后84.9～284.8 m范围内下沉量较大,下沉速率增幅明显;而工作面倾向中部下沉量最大,整体下沉变形呈二次抛物型,其中下部下沉速率增幅明显。     

足趾保护包头的测试方法及技术要求

本文系统阐述了足趾保护包头的技术要求、检测方法、检测设备的主要技术参数。对足趾保护包头和足趾保护鞋中容易混淆的技术要求和测试方法进行说明。为生产企业产品质量改进和企业产品选用提供指导。     

畜禽养殖废水生物处理与农田利用过程抗生素抗性基因的转归特征研究进展

兽用抗生素的广泛使用造成了畜禽养殖场及其周边环境中抗生素抗性基因丰度的提高,而畜禽养殖废水所携带的抗性基因在生物处理及其农田利用过程中的转归规律尚不明确,存在抗性基因从畜禽养殖场向周边环境的传播风险.本文通过文献调研,综述了畜禽养殖废水中抗性基因的赋存特征、抗性基因在畜禽养殖废水生物处理和农田利用过程中转归的研究进展,并提出了今后的研究方向,以期为揭示畜禽养殖废水在生物处理和农田利用过程中抗性基因的消减规律、降低抗性基因传播风险提供借鉴.     

等离子喷涂制备 ZrB2-SiC 复合涂层及其静态烧蚀性能

目的提高C/C复合材料的抗静态烧蚀性能。方法利用大气等离子喷涂技术在C/C复合材料表面制备ZrB_2-SiC复合涂层,对其进行1500℃的静态烧蚀实验。利用X射线衍射仪(XRD)、扫描电子显微镜(SEM)及能谱分析仪(EDS)对涂层的物相成分、微观形貌等进行检测分析。结果采用大气等离子喷涂制备的ZrB_2-SiC涂层是由熔融的粉末粒子紧密堆积而成,呈现典型的层状结构,涂层均匀完整地覆盖于C/C基体表面,厚度约为200μm。涂覆有ZrB_2-SiC复合涂层的C/C复合材料试样在1500℃分别氧化2,3,4 h后,试样依旧保持完整,C/C基体未遭受损伤,试样的质量增加率依次为3.39%,2.95%,4.25%。结论采用大气等离子喷涂技术能够在C/C复合材料表面制备出厚度均匀、结构致密的ZrB_2-SiC复合涂层,ZrB_2-SiC复合涂层使C/C复合材料的抗静态烧蚀性能显著提高。     

Global effects of extreme temperatures on wild bumblebees

Climate plays a key role in shaping population trends and determining the geographic distribution of species because of limits in species’ thermal tolerance. An evaluation of species tolerance to temperature change can therefore help predict their potential spatial shifts and population trends triggered by ongoing global warming. We assessed inter- and intraspecific variations in heat resistance in relation to body mass, local mean temperatures, and evolutionary relationships in 39 bumblebee species, a major group of pollinators in temperate and cold ecosystems, across 3 continents, 6 biomes, and 20 regions (2386 male specimens). Based on experimental bioassays, we measured the time before heat stupor of bumblebee males at a heatwave temperature of 40 °C. Interspecific variability was significant, in contrast to interpopulational variability, which was consistent with heat resistance being a species-specific trait. Moreover, cold-adapted species are much more sensitive to heat stress than temperate and Mediterranean species. Relative to their sensitivity to extreme temperatures, our results help explain recent population declines and range shifts in bumblebees following climate change.     

Ozone Dry Deposition Velocities for Coastal Waters

Air-sea exchange rates for ozone were measured by the eddy correlation technique at a site on the north Norfolk coast in the UK. The average surface resistance to ozone uptake was found to be, r_s(O₃) = 1,000 ± 100 s m^-1. Micrometeorological measurements of trace gas fluxes to ocean surfaces are rare but a review of available measurements suggests that we can constrain sea water surface resistance for ozone to between 1,000 (Regener (1974), and this work) and 1,890 s m^-1 (Lenschow et al., 1982), yielding surface deposition velocities between 0.53 and 1.0 mm s^-1. These values are more than an order of magnitude greater than can be explained by laboratory determined mass accommodation coefficients for ozone to water. The importance of dry deposition with respect to process air-sea exchange models is highlighted. A trend in surface deposition velocity with wind speed was also observed supporting a surface chemical enhancement mechanism of ozone uptake which in turn is enhanced by near surface mixing processes.     

百善煤矿通风系统阻力测定及分析

为掌握百善煤矿井下通风阻力分布及井下通风系统稳定性,根据百善煤矿通风系统实际情况,选择6条测定路线,采用精密气压计逐点测定法,对其通风系统阻力进行测定,全面掌握矿井通风系统的阻力分布情况。分析结果表明:百善煤矿通风系统阻力分布基本合理,风量能够满足矿井实际生产的需求,矿井通风阻力主要集中在回风段。笔者针对百善煤矿通风系统的稳定性提出了合理的建议。