煤矿风井噪声控制的声学设计和阻力损失计算研究

煤矿风井空气流量大 ,噪声辐射强 ,正确合理的消声器声学设计和阻力损失计算是噪声控制成功的关键。     

5种水生植物去污抗逆能力的试验研究

在实验室人工模拟太湖地区初春较寒冷的气象条件下,对5种能越冬的水生植物(伊乐藻、微齿眼子菜、竹叶眼子菜、石菖蒲和水芹菜)在不同营养条件下去除氮磷的效果和一些反映其抗逆能力的生理生化指标进行了系统的对比研究.结果表明:这5种植物均能较好地吸收水中的营养物质,其中以水芹菜和微齿眼子菜的脱氮除磷效果最好;5种植物体内脯氨酸含量均与水体营养物质的质量浓度呈正相关,相同试验条件下,水芹菜和微齿眼子菜体内脯氨酸的积累倍数最高,表明二者的抗逆能力也较强;但当水体营养物质的质量浓度超过一定限值后,5种植物的生物量增长率均随水体营养等级的增高而下降.水芹菜和微齿眼子菜可作为构成双层次群落结构(FAMS)的优选植物种类,用于修复太湖地区富营养化水体.      

填埋场渗漏检测高压直流电法等效电路模型的建立

通过对400V、350V、300V高压直流工作电压下小型模拟填埋场实验数据的分析 ,提出了简化的模型等效电路 .由于高密度聚乙烯(HDPE)衬层的存在使得模型具有了整流特性 ,其电容大小将随着衬层面积和供电电压的增加而增加 ;供电电极的接触电阻与大地的电阻率成正比 ,与电极的粗细及入土深度有关 .同时 ,接触电阻主要由电极附近的土壤电阻决定 ,大于10倍电极半径以外的土壤对接触电阻的影响不超过全部电阻的10% ,故降低电极附近土壤的电阻率可有效地降低电极的接触电阻 .     

煤油厂外排废水回用于循环水

针对炼油厂外排废水回用时存在的结垢和腐蚀问题,讨论了结垢和阻垢机理,详细介绍了水中Ca2+浓度、碱度、总溶固、悬浮物、浓缩系数五项因素对结垢的影响,并通过实验筛选出5种阻垢剂。其中Rp-88、BC-501阻垢率均在90%以上,与国外同类药剂性能相当。     

A non-destructive single plate method for measurement of thermal resistance of polymer sheets and fabrics

Measurement of thermal resistance of polymer sheets and fibrous layers is important in various applications including those within the engineering, ergonomics, clothing design and personal protective equipment fields. Standard methods for measurement of thermal resistance of plain materials are generally time consuming, expensive and often require the sample to be cut. Moreover, the temperature difference between the surfaces of both plates surrounding the sample must be known, as well as the sample thickness. This article describes a new measuring device named the Thermoscope. The Thermoscope is not limited by the aforementioned requirements and is able to evaluate the thermal resistance of polymer sheets and textiles by touching the sample on one surface alone. Simultaneously, the other surface is kept in thermal contact with the supporting base. The accuracy of this device was compared with the Alambeta thermal insulation tester. Effects of various base materials on measurement precision were also studied.     

生物技术在欧美遇到的抵制及教训

回顾了欧美公众对生物技术的种种疑虑和生物技术的研究开发所遇到的阻力，分析了产生这种现象的原因，并提出了我国应从中吸取的教训。     

Clogging of Filtering Material Systems Used for Disposable Respirators

The article shows the problem of clogging in connection with the parameters of filtering materials used in respiratory protective equipment. The results of investigations of airflow resistance changes during the depositing of dust inside the filtering material are presented. The configuration of layers differing in mass per unit area and the number of layers, were taken into consideration. For each configuration, the clogging abilities and the changes of airflow resistance as a reason of loading with dust were assessed. The analysis of tested materials confirms the hypothesis that there is an important coincidence between the properties of the material used in filtering equipment and the clogging coefficient. The results show that the filter should have a layered structure and that the outer layer should be made of a nonwoven of relatively high surface density.     

A Contribution to the Study of the Antidust Respirators’ Real Performance

In most industrial enterprises, hazardous factors are present in quantities exceeding permissible levels. Such a situation requires using antidust respiratory protection. It has been suggested, however, that filters for respirators are not assessed properly and that lab results might not be related to real filtering efficiency in industry. This article contains test results of some commercially available filtering half-masks, including the effect of loading with real dust, high humidity, high temperature, and a combination of loading with dust and high humidity on the half-masks’ performance. The results show that the effect of these factors is considerable and that a combination of loading with silica dust and exposing to high humidity can cause a complete loss of performance.     

湿度显示卡在防水试验中的应用

文章介绍了采用湿度显示卡在产品防水试验中的应用。结合IP等级中的防水试验,通过分析产品的防水结构与内部主要安全部件,科学使用与排布湿度显示卡,准确判定进水路径,以此达到对防水试验结果的准确判定与分析。     

常用过滤材料对微细颗粒过滤性能的研究

通过实验手段对几种过滤材料的阻力、过滤效率进行了研究。结果表明,目前常用的过滤材料对超细颗粒物的除尘效果并不理想,尚有很大的提升空间。