内燃机螺帽径向夹持下料模和镦挤孔模具设计

根据轴向应力对棒料剪断方式及其断口形状的影响,设计了对螺帽锻造所用热轧棒料能进行精密剪切下料的新型结构的径向支持下料模具.采取增加下六角冲头与凹模的配合长度及配合精度的导向方法,设计了在80吨非标压力机上锻带孔螺帽的成形模具.给出了两种模具的试验结果.     

膜生物反应器在高浓度有机废水处理中的应用

介绍了膜生物反应器 (MBR)在高浓度有机废水中的应用。实验结果表明 ,系统对COD、氨氮的去除率较高 ,但出水浓度仍然较高 ,出水几乎监测不到SS。另外 ,膜的通量下降很快 ,维持在较低的水平。     

基于负压法炮弹气密性检测方法研究

目的 实现炮弹气密性检测及其自动化、智能化设备的开发.方法 提出了一种基于负压法的炮弹气密性检测方法.首先,阐述了负压法气密性检测工作原理和实施流程,并对炮弹检测设备的用例模型和检测设备功能框架进行了讨论.其次,针对工程实际,详细给出了测量腔安装密封性计算、测量腔泄漏的压差泄漏率计算、测量腔的初始测量压力值计算、炮弹气体泄漏量计算等检测算法和判定方法.结果 基于负压法的炮弹气密性检测方法的灵敏度比正压法高.结论 本方法可为实现对全弹的气密性检验提供参考,同时也可促进和指导炮弹气密性检验设备的研制,将有效保障炮弹气密性检验自动化设备开发效率和有效性.     

旋转式滗水器设计的动力学计算

在对旋转式滗水器进行了水力学和运动学计算的基础上，对旋转式滗水器进行了动力学计算，给出了其动力学计算公式，与水力学和运动学计算公式一起，共同给出了旋转式滗水器完整的设计计算公式。     

Cesium migration in saturated silica sand and Hanford sediments as impacted by ionic strength

Large amounts of 137Cs have been accidentally released to the subsurface from the Hanford nuclear site in the state of Washington, USA. The cesium-containing liquids varied in ionic strengths, and often had high electrolyte contents, mainly in the form of NaNO3 and NaOH, reaching concentrations up to several moles per liter. In this study, we investigated the effect of ionic strengths on Cs migration through two types of porous media: silica sand and Hanford sediments. Cesium sorption and transport was studied in 1, 10, 100, and 1000 mM NaCl electrolyte solutions at pH 10. Sorption isotherms were constructed from batch equilibrium experiments and the batch-derived sorption parameters were compared with column breakthrough curves. Column transport experiments were analyzed with a two-site equilibrium-nonequilibrium model. Cesium sorption to the silica sand in batch experiments showed a linear sorption isotherm for all ionic strengths, which matched well with the results from the column experiments at 100 and 1000 mM ionic strength; however, the column experiments at 1 and 10 mM ionic strength indicated a nonlinear sorption behavior of Cs to the silica sand. Transport through silica sand occurred under one-site sorption and equilibrium conditions. Cesium sorption to Hanford sediments in both batch and column experiments was best described with a nonlinear Freundlich isotherm. The column experiments indicated that Cs transport in Hanford sediments occurred under two-site equilibrium and nonequilibrium sorption. The effect of ionic strength on Cs transport was much more pronounced in Hanford sediments than in silica sands. Effective retardation factors of Cs during transport through Hanford sediments were reduced by a factor of 10 when the ionic strength increased from 100 to 1000 mM; for silica sand, the effective retardation was reduced by a factor of 10 when ionic strength increased from 1 to 1000 mM. A two order of magnitude change in ionic strength was needed in the silica sand to observe the same change in Cs retardation as in Hanford sediments.     

Virus retention and transport through Al-oxide coated sand columns: effects of ionic strength and composition

Knowledge of the factors that influence the fate and transport of viruses in porous media is very important for accurately determining groundwater vulnerability and for developing protective regulations. In this study, six saturated sand column experiments were performed to examine the effects of a positively charged Al-oxide, which was coated on sand particles, on the retention and transport of viruses (phiX174 and MS-2) in background solutions of different ionic strength and composition. We found that the Al-oxide coating on sand significantly removed viruses during their transport in a phosphate buffered saline (PBS) solution. Mass balance calculations showed that 34% of the input MS-2 was inactivated/irreversibly sorbed on the surface of Al-oxide coated sand whereas 100% of phiX174 was recovered. Results from this study also indicated that higher ionic strength facilitated the transport of both phiX174 and MS-2 through the Al-oxide coated sand. This was attributed to the effect of ion shielding, which at higher ionic strength decreased the electrostatic attraction between the viral particles and the sand surface and consequently decreased virus sorption. Strong effect of the ionic strength indicates that an outer-sphere complexation mechanism was responsible for the virus sorption on the Al-oxide coated sand. Ion composition of the background solutions was also found to be a significant factor in influencing virus retention and transport. Virus transport was enhanced in the presence of phosphate (HPO(4)(2-)) as compared to bicarbonate (HCO(3)(-)), and the effect of HPO(4)(2-) was more significant on MS-2 than on phiX174. The presence of bivalent cations (Ca(2+) and Mg(2+)) increased virus transport because the cations partially screened the negative charges on the viruses therefore decreased the electrostatic attraction between the positively charged sand surface and the negatively charged viruses. Mass recovery data indicated that bivalent cations gave rise to a certain degree of inactivation/irreversibly sorption of phiX174 on the surface of Al-oxide coated sand. On the contrary, the bivalent cations appeared to have protected MS-2 from inactivation/irreversibly sorption. This study provides some insights into the mechanisms responsible for virus retention and transport in porous media.     

Effects of uncontrolled particulate matter release on precipitation under warfare conditions

This study has shown theoretical, observed and experimental evidence of pollutants released, transported and deposited during the Kosovo conflict in 1999 and their effects on precipitation in Serbia. The greatest bombardment of the chemical industry, oil refineries and fuel storage in Serbia which occurred during April, resulted in releases of many hazardous, toxic and cancerogenic substances. The number of April's days with precipitation greater or equal to 0.1 mm in 1999 are compared to those in the period from 1961 to 1990 registered at thirty meteorological stations in Serbia and especially at the Belgrade-Observatory station in the period from 1888 to 1995. The maximums of days with precipitation greater or equal to 0.1 mm were at the wider Belgrade area and at the central and southwestern parts of Serbia during April 1999. This is confirmed by using the Eta trajectory analysis.     

产品生命周期可得性水足迹计算方法

水足迹方法试图量化评价人类活动对水资源可得性的影响,从而为水资源可持续利用提供科学的依据.水足迹的评价方法尚未统一,目前全球应用最为广泛的是WFN（water footprint network,水足迹协作网络）水足迹计算方法.基于LCA（life cycle assessment,生命周期评价）方法的基本框架,围绕水资源可得性的水量、水质和空间分布3个因素,在分析现有水足迹计算公式的基础上,指出了WFN水足迹计算方法的不足.根据国际水足迹标准（ISO 14046）的原则和要求,改进了WFN的水足迹计算公式,提出了产品生命周期WAF（water availability footprint,可得性水足迹）定义和评价方法,其中包括单元过程数据计算、背景过程数据处理和生命周期汇总.通过方法对比和案例研究得到:WAF方法统一了水消耗量与水污染量定义中的水质基准,可以明确区分水污染和水净化两类过程,还可以反映区域水资源稀缺程度的影响;采用WAF方法,在现有LCA数据库和软件的支持下可以更为规范地完成生命周期水足迹建模与计算但目前单元过程数据计算中各种污染物的基准浓度选取有不可避免的主观性,将直接影响到水足迹计算结果及其客观性,有待进一步研究.      

Best practice recommendations for scale construction in organizational research: The development and initial validation of the Character Strength Inventory (CSI)

Proper scale development and validation provide the necessary foundation to facilitate future quantitative research in the organizational sciences. Using the framework provided by the Researcher's Notebook , the purpose of this study is twofold. First, we present a modern summary of best practice procedures for scale development, reliability analysis, and validity analysis. Second, we explain and illustrate these best practice procedures by describing each procedure in the context of developing and psychometrically analyzing a new Character Strength Inventory (CSI). Copyright © 2017 John Wiley & Sons, Ltd.     

辅助燃料对垃圾熔融炉炉温影响的分析研究

文章计算了在不同焦炭加入量及不同焦炭和煤的配比条件下处理城市生活垃圾时气化熔融炉的炉温。计算结果表明,用焚烧法处理重庆市的生活垃圾时,在常温鼓风条件下,要使垃圾灰渣完全熔融,焦炭配比至少应在42％以上;在一定的条件下,可以用煤部分或全部代替焦炭,同时配以高温鼓风,可使炉温达到并超过垃圾灰渣的熔融温度,从而使得垃圾灰渣熔融。