煤巷掘进过程中粉尘浓度影响因素分析

为了掌握煤巷掘进过程中粉尘浓度变化的影响因素,根据气固两相流理论,针对矿井掘进工作面的特点,采用计算流体力学的离散相模型（DPM）考察了掘进巷道风速、风筒直径、风筒出风口到掘进工作面距离以及风筒的悬挂高度对粉尘浓度变化的影响。结果发现：当掘进巷道风速为0.25-4 m/s时,提高巷道内的通风风速,可以降低巷道内的粉尘浓度,缩短呼吸性粉尘浓度达到稳定的时间,减小工作面粉尘的危害;有利于通风除尘的风筒相关参数为风筒直径0.4-0.6 m、风筒出风口到掘进工作面距离6-7 m、风筒悬挂高度2.0-2.2 m。     

基于CFD对袋式除尘器流场的分析

采用计算流体力学(CFD)软件对袋式除尘器单元气流组织进行数值模拟分析,给出了 沿滤袋高度方向过滤风速的分布,以及袋间隙气流抬升速度在不同高度上的分布特征,为袋式除尘器的改进和设计提供理论依据.     

诱导排烟系统应用于地下车库的实验研究

运用实验研究的方法分析了诱导排烟系统在地下车库中应用的可行性,研究了布置方式、诱导风速等敏感参数对排烟效果的影响,主要分析了火源上游不同位置处温度的变化。结果表明,诱导排烟系统能有效地抑制烟气向上游的逆流并能加强烟气的热对流,降低上游烟气的温度;另外,开启少于均匀布置诱导风机数目下,菱形布置诱导风机下的排烟效果优于均匀排列布置;在实验风速范围内,诱导排烟系统对上游烟气的控制和降温能力随着诱导风速的增加而提高,同时,在火源功率一定的条件下,增大诱导风速对控烟效果的改善存在临界值。     

螺旋式旋流器的切向速度分析

借助CFD软件,采用RSM模型对螺旋式旋流器内的切向速度场进行了数值模拟。模拟结果表明:旋流器内部的流场分为螺旋通道内的准自由涡和内筒区域的准强制涡;在柱锥交界区域的内筒外壁附近有一低速区,易导致颗粒富集而出现高浓度区进而影响分离效率;此外通过改变入口速度和螺旋通道的螺距,研究对旋流器切向速度的影响。通过对流场特性的研究,为进一步充分认识此类旋流器的分离机理提供了依据。     

风速测量仪器的动力学性能研究

探讨了几种风速测量仪器的测头平面法线和来流方向成某一角度时 ,产生的测量偏差的大小     

Predicting the mating system from phenotypic correlations between life-history and sperm quality traits in the Alpine whitefish <Emphasis Type="Italic">Coregonus zugensis</Emphasis>

The mating behavior and reproductive strategies of Alpine whitefish like Coregonus zugensis (Nüsslin) are poorly understood, probably because they spawn in deep water where direct observations are difficult. In this study, we interpret life-history and sperm quality traits of fish that we caught from their spawning place. We found that males invest heavily into gonadal tissue (up to 5.6% of their body weight), which is, in comparison to other fish, consistent with external fertilization, distinct pairing and moderate to high communal spawning, or no pairing and low to moderate communal spawning. Sperm competition theory and recent experimental studies on other salmonids predict that males optimize ejaculate characteristics in relation to the costs of sperm and the level of competition they have to expect: dominant males are predicted to invest less into ejaculate quality and to have slower spermatozoa than subdominant males. We found that spermatozoa of older males are slower than those of younger males. Moreover, older males have larger breeding tubercles, a secondary sexual trait that has, in some previous studies, been found to be linked to good condition and to good genetic quality. Our results suggest that C. zugensis has age-linked reproductive strategies, that multimale spawning is common, i.e., that sperm competition plays a significant role, and that older males are on average dominant over younger males at the spawning place.     

DPIV技术测量流冰速度应用研究

基于数字信号分析原理,对连续两幅图像进行互相关分析,寻找互相关函数的峰值;应用数字粒子图像测速(digital particle image velocimetry)技术,并通过计算机VC编程,解决了用于雷达测量单点流冰速度的不足;为大范围区域内流冰场瞬时速度的计算,实时雷达测量辽东湾海上流冰速度场提供了有应用价值的方法.     

中空纤维膜脱气工艺处理给水的试验研究

研究了中空纤维膜脱气工艺,测定了在不同的液相流速、流量下,膜的氧传质系数、脱氧脱二氧化碳的效率变化以及膜管的放置方式对脱气效率的影响。     

The explosion of non-nano iron dust suspension in the 20-l spherical bomb

The understanding of dust explosion is still incomplete because of the lack of reliable data and accurate models accounting for all the physic-chemical aspects. Besides, most of the experimental data available in the current literature has been accumulated on the 20-l spherical bomb tests, which gives coarse results for the pressure history that cannot be easily converted into fundamental combustion parameters. Nevertheless, the large amount of experimental data available in the spherical bomb is attractive. In this work, the explosion of non-nano iron dust in the standard spherical vessel is analyzed, aiming at evaluating the burning velocity from the theoretical point of view and the simple experiments performed by the standard explosion tests. The choice of iron is of relevance because its adiabatic flame temperature is below the boiling temperature of both the reactants and oxidized gaseous, liquid, or solid (intermediate and final) products and for the negligible particle porosity, which instead is typical of organic dust. Therefore, a non-nano iron dust explosion can be reconducted to a reduced mechanism since heterogeneous (surface) combustion may be determinant, and the diffusion mechanism for oxygen is the only relevant. The laminar burning velocity is strongly dependant on the particle diameter, whereas little effects are due to the dust concentration. The reported final value was found in agreement with typical limiting laminar burning velocity, adopted for the estimation of flammability limits.