Co-fermentation of waste activated sludge with food waste for short-chain fatty acids production: effect of pH at ambient temperature

Effect of pH ranging from 4.0 to 11.0 on co-fermentation of waste activated sludge (WAS) with food waste for short-chain fatty acids (SCFAs) production at ambient temperature was investigated in this study. Experimental results showed that the addition of food waste significantly improved the performance of WAS fermentation system, which resulted in the increases of SCFAs production and substrate reduction. The SCFAs production at pH 6.0, 7.0, 8.0, and 9.0 and fermentation time of 4 d was respectively 5022.7, 6540.5, 8236.6, and 7911.7 mg COD·L^-1, whereas in the blank tests (no pH adjustment, pH 8.0 (blank test 1), no food waste addition, pH 8.0 (blank test 2), and no WAS addition (blank test 3)) it was only 1006.9, 971.1, and 1468.5 mg COD·L^-1, respectively. The composition of SCFAs at pH from 6.0 to 9.0 was also different from other conditions and propionic acid was the most prevalent SCFA, which was followed by acetic and n-butyric acids, while acetic acid was the top product under other conditions. At pH 8.0 a higher volatile suspended solids (VSS) reduction of 16.6% for the mixture of WAS and food waste than the sole WAS indicated a synergistic effect existing in fermentation system with WAS and food waste. The influence of pH on the variations of nutrient content was also studied during anaerobic fermentation of the mixture of WAS and food waste at different pH conditions. The release of NH4+-N increased with fermentation time at all pH values investigated except 4.0, 5.0 and in blank test one. The concentrations of soluble phosphorus at acidic pHs and in the blank test one were higher than those obtained at alkaline pHs. Ammonia and phosphorus need to be removed before the SCFAs-enriched fermentation liquid from WAS and food waste was used as the carbon source.     

Fatty acid composition of marine macroalgae from the Black Sea and Dardanelles

The fatty acid (FA) composition was determined in 14 species of marine macroalgae belonging to the Chlorophyta, Phaeophyta and Rhodophyta, which were collected from ?ile in the Black Sea and Kepez in the Dardanelles. Generally, polyunsaturated FAs and monounsaturated FAs were major components (50–77%). Total saturated FAs ranged from 22% to 50%, with 16?:?0 as the most abundant saturate (32–38%). Two samples of Cystoseira barbata collected from a different station had some differences from each other in their contents of 18?:?2n-6 and 18?:?3n-3 and in the 18?:?2n-6/20?:?4n-6 ratios. Green algal species had a significantly higher proportion of unsaturated FAs and a significantly lower proportion of saturated FAs than the red and brown algae. The amount of n-3 FAs was significantly higher in Ulva rigita, Chaetomorpha linum, Enteromorpha linza and Gracilaria verrucosa (8.88, 6.44, 5.31 and 5.24, respectively).     

Employment of passive sampling in monitoring indoor air quality in selected residences in a Tri-city area in Poland

Time-weighted average concentrations of selected volatile compounds were measured in chosen residences in a Tri-City area of Poland by means of passive sampling. The results were compared to those obtained by dynamic technique – sorption tubes filled with Tenax TA sorbent. Results obtained by employing the two techniques were similar. Total volatile organic compound (TVOC) parameters were also determined. An attempt was also made to evaluate the influence of outdoor air pollutants on indoor air quality.     

Toxicity of cypermethrin on total lipids and free fatty acids in liver,muscle, kidney and ovary of Clarias batrachus (L) and recovery response

Alterations in the levels of lipid metabolites, total lipids and free fatty acids, were studied in physiologically important tissues viz; liver, muscle, kidney and ovary of a freshwater edible fish Clarias batrachus. The fish was exposed to sublethal concentration (1/3 of LC50 value for 96?h) of a synthetic pyrethroid insecticide, cypermethrin for 1, 5 and 10 days. After 10 days of exposure, fish were released into fresh water and total lipids and free fatty acids were determined at intervals of 1, 5 and 10 days to assess fish recovery response after cessation of cypermethrin exposure. Fish showed an increased rate of lipogenesis in liver, muscle, kidney and ovary during the exposure period followed by a decrease after transfer of fish into fresh water. There was also an elevation in liver and kidney free fatty acids contents, while the muscle and ovary free fatty acid contents were reduced during exposure period. The alterations in free fatty acids were restored to near normal values after 10 days of cessation of exposure.     

Study of sorptive properties of trap systems for selective enrichment of volatile organic compounds from tobacco smoke samples

There is a dearth of data on the consumer product concentrations of iron, lead, and nickel for accurate comparison to be made. The levels of these elements were determined in 85 samples of six different classes of personal care products commonly used in Nigeria using atomic absorption spectrophotometry. The results of the analysis showed that the range of the mean concentrations of Fe was 0.485–1.108 ppm, Pb ND–0.163 ppm, and Ni ND-0.160 ppm. The analytical data have demonstrated that the selected consumer products are possible sources of iron, lead, and nickel exposure. Users can be exposed to these metals directly through dermal contact or inhalation. The regulations relating to cosmetic products give no limit values for heavy metals in cosmetic products, hence, it was difficult to establish if the values obtained in this study are safe or not. Prolonged use of soaps, creams, and detergent containing these elements may pose threat to human health and the environment. This could be responsible for various skin diseases such as allergic skin, follicular and pigmentary disorders, which are common among the users (exposed groups) of these products in Nigeria. A body of evidence has presented a rare example of systemic allergic dermatitis caused by topical application of a mercury-containing cosmetic to the upper lip of a 32-year-old Turkish patient.     

Effect of curacron toxicity on the total serum protein content of Cyprinus carpio

An experiment was conducted on freshwater fish Cyprinus carpio to study the effect of the pesticide curacron on total serum protein. Curacron is an organophosphate pesticide and used by the farmers to protect their crops. This pesticide reaches the aquatic ecosystem by direct or indirect means and affects aquatic fauna. LC50 for curacron for C. carpio was calculated by the log-dose/probit regression line method and found to be 0.38?ppm at 96?h. Three sub-lethal concentrations (0.1, 0.01, and 0.001?mL?L^?1) were selected to expose the fish for 1, 7, 14, and 21days. Changes in total serum protein were observed at all pesticide concentrations and exposure periods. Total serum protein was decreased from control. At 1 and 7 days, the decrease was quantitative at all concentrations, while at 14 and 21 days, the fall was significant at all concentrations. Hence, human population may be at risk by consuming these contaminated fish.     

Metal levels in computer monitor components discarded in the vicinities of electronic workshops

Levels of Pb, Ni, Cr, Cu, Zn, and Cd in the glass screens (GS) and printed wiring boards (PWBs) of obsolete computer monitors (OCMs) were determined by flame atomic absorption spectrophotometry (FAAS) following standard digestion. Metal concentrations (mg kg^?1) in GS were in the following ranges (medians in brackets): Pb ND – 3100 (46), Cd 0.5–2.6 (0.8), Cr ND – 18.7 (3.1), and Zn 8.1–600 (37) and in PWBs (mg kg^?1): Pb 34,600 ± 17,000, Cd 11 ± 9, Cr 59 ± 45, Zn 15,900 ± 7800, Cu79,000 ± 22,600, and Ni 3200 ± 2500. In GS, the levels of the six metals were lower than their total threshold limit concentrations (TTLC), except for Pb with a TTLC of 1000 mg kg^?1 in 10% of the samples. In the PWBs, the TTLC of Pb and Cu (2500 mg kg^?1) was exceeded many fold. For Zn (5000 mg kg^?1) and Ni (2000 mg kg^?1); they were exceeded by 90% and 65%, respectively. For OCMs manufactured in 2001 and later, Pb and Zn levels in GS and Cr, Zn, and Ni in PWBs were significantly reduced.     

Cleanup by solid‐phase extraction and HPLC of organochlorine insecticides and PCBS in various nonfatty and fatty samples

An accurate, simple and cheap extraction and cleanup procedure for capillary GC analysis of organo‐chlorine insecticides (OCs) in vegetables (cabbage and carrots) at the ng/g level, and for soil at the μg/g level is presented. The cleanup is carried out on solid‐phase extraction (SPE) cartridges, filled with 500 mg silica, 1 g of deactivated Florisil (10% w/w water), and 100 mg of anhydrous sodium sulphate. Recoveries >90% are obtained. The cleanup of OCs in fatty samples on an HPLC LiChrosorb Si 100 column is evaluated for subsequent capillary GC analysis. Fractionation of OCs and Aroclor 1254 and 1260 on an HPLC Nucleosil 100 column appears to be satisfactory.     

Removal of pesticides from water samples by adsorption with fatty acids supported on barium sulphate

Oleic or linoleic acid supported on barium sulphate was used to remove atrazine and terbuthylazine in the range of 0.1–2.0 μg/L using spiked water samples. The sorption of atrazine depends on the stirring time and the best value is 150 min. Terbuthylazine is removed well with a stirring time of 60 min and its adsorption is about 90%. Detection of the residual pesticide in treated waters, after solid phase extraction (SPE), was carried out by GC‐MS operating in selected ion monitoring (SIM) using a calibration curve by direct injection of standard solutions of herbicide.     

珠江三角洲印刷行业VOCs组分排放清单及关键活性组分

根据珠江三角洲地区印刷行业活动数据和不锈钢罐采样-气质联用技术,获取了印刷工艺VOCs成分谱,建立了该地区2010年印刷行业VOCs组分排放清单,研究了不同工艺排放的臭氧生成潜势. 结果表明:该地区2010年印刷行业VOCs排放总量达8591.26t,深圳、东莞、佛山排放量较大.凹印是印刷行业主要VOCs排放工艺,排放量达5762.01t;平印和凸印次之,分别为1954.01和37.82t.不同工艺排放的VOCs组分差异较大,平印工艺排放的VOCs成分中异丙醇含量最多(306.58t),其次为正庚烷(115.87t);苯和甲苯是凸印工艺排放的VOCs成分中含量最大的2种化合物,分别达5.58和4.83t;乙酸乙酯是凹印工艺排放的VOCs成分中的首要化合物,达2482.85t.凸印工艺排放的VOCs单位浓度臭氧潜势最大,达1.30μg/m3,平印和凹印较小,分别为0.89和0.72μg/m3,各工艺排放的含氧有机物对臭氧生成潜势的贡献均为最大.