A Survey of Trace Metals in Vegetation, Soil and Lower Animal Along Some Selected Major Roads in Metropolitan City of Lagos

The concentration of trace metals (Cd, Cu, Pb and Zn) in a total of 144 samples of grass, soil and lower animal (earthworm, Lybrodrilus violaceous) were collected and analysed for their metallic content. Levels of cadmium ranged from 0.01–0.07 g g^–1; 0.01–0.12 g g^–1 and from trace–0.05 g g^–1 dry weight for plant, soil and animal samples respectively. Mean concentration of copper ranged 0.10–1.48 g g^–1; 0.10–2.90 g g^–1 and 0.01–0.08 g g^–1 for samples in similar order as above. The levels of Pb varied from 0.01–0.14 g g^–1; 0.02–0.23 g g^–1 and from trace–0.07 g g^–1 while that of Zn ranged from 0.19–1.80 g g^–1; 0.51–3.35 g g^–1and 0.01–0.08 g g^–1 also in the same order of samples as mentioned above. Levels of metals in soil samples were higher than the background levels with the exception of Zn but lower than European Union (EU) limits. The results generally revealed the presence of metals in plant and animal samples and metal dynamics up the food chain is highly possible. Acceptable recoveries of the spiking experiment validate the experimental protocol.     

Determination of arsenic in grain and soil by hydride nondispersive atomic fluorescence method

Quantity of trace arsenic in grain and soil was determined by hydride nondispersive atomic fluorescence method.Optimum conditions of measurement were selected in the experiment including the pH of the medium, reductive agent, the concentration and flowing velocity of KBH4, rate of carrier gas and atomized temperature. The reference sample of rice C was determined and the linear relationship of the calibration curve was plotted, indicating that the method was highly precise. In the experiment of recovery rate, the method was quite satisfactory.Based on the determination of hundreds of samples, it is proved that atomic fluorescence method is rapid, sensitive and low in interference. It is very efficient on determination of trace arsenic in soils and grains, especially in grains.     

Heavy metals in water bodies purified by suspended substrate of rivers

ＩｎｔｒｏｄｕｃｔｉｏｎＨｅａｖｙｍｅｔａｌｓｉｎｗａｔｅｒｂｏｄｉｅｓａｒｅｓｉｇｎｉｆｉｃａｎｔｌｙｄｉｆｆｅｒｅｎｔｆｒｏｍｏｒｇａｎｉｃｐｏｌｌｕｔａｎｔｓｔｈａｔｃａｎｂｅｍｉｃｒｏｂｉｏｌｏｇｉｃａｌｌｙｄｅｇｒａｄｅｄｏｒｄｅｃｏｍｐｏｓｅｄ .Ｇｅｎｅｒａｌｌｙ ,ｔｈｅｙａｒｅｐｕｒｉｆｉｅｄｔｈｒｏｕｇｈｔｈｅｉｒａｄｓｏｒｐｔｉｏｎｏｎｔｏｓｕｓｐｅｎｄｅｄｓｕｂｓｔｒａｔｅｓｉｎｒｉｖｅｒｓ.Ａｄｓｏｒｐｔｉｏｎｏｆｈｅａｖｙｍｅｔａｌｓｏｎｒｉｖｅｒｓｕｓｐｅｎｄｅｄｓｕｂ…     

膨润土吸附－絮凝法处理污水中的重金属离子

研究了天然膨润土对Ｐｂ￣（２＋）、Ｃｄ￣（２＋）、Ｃｒ￣（３＋）的吸附和膨润土的絮凝沉降条件，将吸附与絮凝过程结合起来形成处理污水的新工艺，加入０．０４％膨润土和０．００６％的ＰＡＣ可使低浓度污水中Ｐｂ￣（２＋）脱除９３．１％。     

城市生活垃圾理化性质的动态特性分析

对太原市城市生活垃圾的组成、化学元素及重金属等进行了1年(每月2次)共24次的分析。结果表明,太原市生活垃圾的组成在焚烧过程中,能产生低位热值(Q低)的有机物占(44.28±2.24)％,不产生低位热值的无机物占(13.94±2.01)％,混合物(破碎的动植物碎片及粘附在其上面的灰、土、砂)占(43.36±8.67)％。垃圾中可燃物比例较高,水分含量较低,有利于焚烧和热解,低位热值(Q低)平均值为(5590.8±1252.3)kJ/kg,但低位热值随季节变化较大。垃圾中化学元素硫(S)、氯(Cl)、氮(N)、氢(H)、碳(C)、氧(O)的年平均值分别为(0.20±0.13)％、(0.48±0.11)％、(0.87±0.18)％、(2.56±0.76)％、(30.78±4.06)％、(16.42±5.17)％,与其他城市相比,S、N、Cl的含量较高。垃圾中的重金属铅(Pb)、镉(Cd)的年平均值分别为41.94mg/Kg和1.806mg/kg;汞(Hg)含量变化较大。焚烧后的灰渣中,Pb部分挥发,Cd得到富集,但几乎无Hg检出。     

螯合纤维的合成及其吸附重金属离子的研究

研究了含有胺肟基和胺腙基功能纤维的合成、结构表征和螯合性能。新型合纤维对多种重金属离子具有良好的吸附性能，能从被污染的水体和土壤中去除重金属离子，经洗脱后可回收金属，螯合纤维能反复使用。     

淮北煤中12种有害微量元素在煤及其灰中的分布特征

为了解有害微量元素在各煤层中的分布与变化规律,以及在煤燃烧后的煤灰中所发生的迁移与富集情况,采集了淮北煤田不同煤层、不同深度的15个煤样,采用中子活化法对其原煤及灰分中的12 种微量元素(Ag, As,Ba, Co, Cr, Cu, Mn, Mo, Sb, Th, U, V)进行了测试。结果显示:绝大部分有害微量元素的含量都处于n×10 6到n×10 5数量级范围内,不同煤层或同一煤层不同部位中微量元素的含量分布不同;与全国和华北煤中有害微量元素的(平均)含量相比,除Mn低于全国和华北的平均值外,As、Co、Mo、Sb、Th、U与之相近,而Ag、Ba、Cr、Cu、V高于全国和华北煤中的平均值;12种微量元素均在灰分中有所富集,而且富集能力序列为:Cu>Cr>Mn>Mo>Co>Ba>V>Th>As>U>Sb。     

恐龙骨骼化石与其它脊椎动物骨骼的微量元素的对比研究

采用中子活化分析 (INAA)技术 ,对比分析恐龙骨骼化石及其它脊椎动物 (乌龟、鱼和大量哺乳动物 )骨骼中微量元素的含量组合 ,结果表明稀土、砷、钡、铀元素在恐龙骨骼化石中的含量远高于其它脊椎动物骨骼 ,而锌元素的含量情况却与之相反 ;同时进一步分析推测得出 :这种砷、钡元素含量的高异常和锌元素的低异常 ,极可能是导致四川盆地恐龙动物群集群死亡的原因之一。     

黄河中游主要重金属污染物的迁移转化

探讨了内蒙古自治区黄河水体中微量有毒重金属汞、镉、铅、砷在水体中的迁移、转化。对于控制重金属污染物在水体中的形态分布、迁移转化及归宿具有重要的作用。     

重金属离子在腐殖酸表面的吸附——类颗粒表面吸附模型

本实验用伏安质子滴定法获得重金属离子(Cu~(2+)、Pb~(2+)、Cd~(2+))在腐殖酸表面吸附的实验数据,并基于这些数据提出重金属离子在腐殖酸表面的络合模型。模型中引入两个实验常数:反应系数α和竞争反应常数K_H。实验结果表明,这两个常数的实验值在一相当宽的起始溶液条件下基本稳定。基于这两个常数而获得的pH相关吸附等温线和实验数据相当符合。模型中采用了由电位滴定得到的腐殖酸表面羧基浓度作为最大表面基团浓度,并对其质子解离常数进行了表面电荷影响的修正。