风浪作用下海岸区域的酸性污染物扩散

基于风浪和水流计算模型,综合考虑风浪作用的影响,建立了计算酸性污染物的输移扩散模型。通过计算三门湾海域在常浪向情况下四个时刻的污染物排放模式,将有无风浪影响的两者结果进行对比,初步分析了风浪作用下的酸性污染物扩散规律。结果认为:潮型、排放时刻、风浪等因素都会使酸性污染物的扩散面积与污染持续时间发生变化;并且在该方向风浪影响下,扩散面积与污染持续时间都有减小的趋势。     

大连市酸雨污染现状及防治措施

近年来大连市的酸雨污染呈逐年加重趋势,根据2010年酸雨监测的结果,从酸雨频率、酸雨分布及离子组成三方面对大连市酸雨污染的现状进行了简要概述,并根据大连市的实际情况提出了酸雨污染的防治措施。     

海洋中丙烯酸的研究进展

丙烯酸是海洋中的短链脂肪酸,是海洋中主要含硫化合物DMSP(dimethylsulfoniopropionate,β-二甲基巯基丙酸内盐)裂解的产物之一。本文综述了海洋中丙烯酸的来源、性质、在海洋中的作用以及海水中丙烯酸的测定方法。通过观测海水中丙烯酸的含量、分布及生物地球化学循环过程,有助于了解丙烯酸对海洋生态系统碳循环和硫循环的贡献。并对海洋中丙烯酸的进一步研究提出了展望。     

基于生命周期的产品碳足迹评价与核算分析

近年来,越来越多的企业对其产品进行碳足迹评价,评价方法主要采用产品碳足迹评价标准提供的碳计量方程,如GHG Protocol、ISO14064、PAS 2050、TS Q 0010等。在介绍相关评价标准的基础上,分析了产品碳足迹的评价步骤,最后利用河北盛华化工有限公司生产的PVC产品为例,给出了基于生命周期的B2B模式的产品碳足迹评价的案例。为企业及相关机构开展碳足迹评价提供借鉴作用。     

铜陵相思谷尾矿用于处理酸性矿山排水的实验研究

铜陵相思谷尾矿是夕卡岩型矿床尾矿的典型代表,以富含碳酸盐为特征.为了考察该尾矿砂在AMD淋滤作用下重金属的迁移行为及用于处理AMD的有效性,研究在自行设计的动态实验柱中填充尾矿砂,在保持进水理化性质不变的条件下对其进行80 d的连续淋滤实验,实验过程中定期检测出水的成分,实验结束后对尾矿砂中元素赋存特征进行分析.结果表明,实验过程中出水pH值始终维持在7.5以上;Cu、Zn、Fe离子浓度分别保持在0.1、0.4、1 mg.L-1以下;尾矿砂的渗透系数逐渐降低,由初始的0.23 cm.s-1降至实验结束时的0.10 cm.s-1;固体中元素赋存形态分析结果表明,进水Cu2+、Zn2+主要通过2种作用被固定:Fe氢氧化物的吸持和自身沉淀(形成碳酸盐).研究发现铜陵相思谷尾矿具有较强的酸中和潜力,在中和过程中不仅不会产生重金属离子的淋滤迁移,相反会对其产生沉淀和吸附,因此,可以考虑将该尾矿作为AMD处理的有用材料进行废物利用.     

绿色阻垢剂聚天冬氨酸的液相优化制备

在分析国外多种合成聚天冬氨酸(PASP)的方法的基础上,采用马来酸酐与氨水进行溶液聚合的方法制备聚天冬氨酸,并对产物的阻垢率、黏均相对分子质量、生物降解性等性能指标进行了评价.采用静态阻垢法评价产物的阻垢率;采用极限黏度法测定聚琥珀酰亚氨的聚合度,然后计算PASP的黏均相对分子质量;采用摇床法通过对比降解前后的COD检测PASP的生物降解性能.同时,根据性能指标的变化分别对原料的物质的量配比、聚合温度和聚合时间进行了单一条件的筛选.经实验确定的合成PASP的最佳条件是:原料物质的量配比1∶1.1,聚合温度160℃,聚合时间1 h.在此条件下合成的PASP阻垢率超过95%,生物降解性能达到70%.     

荷电超滤膜对天然有机物去除及膜污染行为的影响

以Aldrich 腐殖酸溶液为水样,研究比较了溶液环境(pH值、离子强度和钙离子)对荷电改性再生纤维素超滤膜和传统中性未改性再生纤维素超滤膜过滤过程的影响.结果表明, ①pH值主要通过质子化作用影响荷电膜以及腐殖酸分子的荷电量,进而影响荷电超滤过程.溶液pH值从7.5下降到3.5时,荷电超滤膜对腐殖酸的截留率从92%减少到79%,超滤4 h时,膜通量下降从26%增加到36%.②离子强度的改变是通过影响腐殖酸分子的物化性质和静电屏蔽作用来影响超滤过程的.当溶液离子强度为0、 3和100 mmol/L时,初始截留率依次降低,分别为92%、 87%和48%,超滤4 h时,荷电超滤膜的通量下降依次增加,分别为26%、 35%和63%.③Ca2+浓度的影响,需要综合考虑静电屏蔽作用、Ca2+的架桥作用以及滤饼层的压实性等各方面的影响.④pH值、离子强度和钙离子对中性超滤膜过滤行为的影响趋势与荷电超滤膜相似,但其影响程度有着较大的差别.研究结果对荷电超滤膜技术在实际应用中选择合适环境条件提供了参考.     

春季黄渤海大气气溶胶的离子特征与来源分析

于2010年春季在黄海、渤海海域采集大气气溶胶总悬浮颗粒物（TSP）样品,并运用离子色谱法对其中主要的水溶性阴离子（Cl-、NO3-、SO24-、CH3SO3-（MSA））和阳离子（Na＋、K＋、NH4＋、Mg2＋、Ca2＋）浓度进行了测定.分析结果显示,黄海、渤海气溶胶样品中主要水溶性离子总浓度分别为10.2～47....     

Sustainability issues in sheet metal forming processes: an overview

Environmental sustainability in manufacturing is nowadays an urgent and remarkable issue and the main concerns are related to more efficient use of materials and energy.In sheet metal forming processes there is still a lack of knowledge in this field mainly due to the need of a proper modelling of sustainability issues and factors to be taken into account. The aim of this paper is mainly to underline the state of the art from a forming point of view about the sustainability contributions offered in any phase of a product life cycle. Actually, a lack in terms of comprehensive contributions is present in the technical literature, thus, the authors try to give a sort of holistic vision aimed to provide basic guidelines in order to help in identifying the possible solutions with regard to all the phases of a forming product life cycle. The main attention was paid to sheet metal forming technologies. The paper gives an overview of the main topics concerning sheet metal forming problems related to energy and resource efficiency with the aim to stress the principal contributions which may derive from such processes to environmental performances of manufacturing.     

An environmental impact assessment of quantum dot photovoltaics (QDPV) from raw material acquisition through use

Some emerging technologies are expected to be pivotal for solving many of the environmental challenges faced today, especially those related to energy. However, many of these technologies may incur significant environmental impacts over their life cycle, while having environmental benefits during their use. This paper presents results of a Life Cycle Assessment (LCA) of a proposed type of nanophotovoltaic, quantum dot photovoltaic (QDPV) module. The LCA is confined to the stages of raw materials acquisition, manufacturing, and use. The impacts of QDPV are compared with other types of PV modules and energy sources - both renewable and nonrenewable. To provide a comprehensive comparative assessment, QDPV modules were compared with mature as well as emerging PV types for which data are available. Comparative assessment with other types of energy sources includes coal, oil, lignite, natural gas, diesel, nuclear, wind, and hydropower.QDPV modules may have the potential to overcome two current barriers of solar technology: low efficiencies and high manufacturing costs. If higher efficiencies are realized, QDPV modules could pave the way to large scale implementation of solar energy, helping nations move toward greater energy independence. On the other hand, candidate materials as quantum dots for solar cell applications are mostly compound semiconductors such as cadmium selenide, cadmium telluride, and lead sulfide which may be toxic and for which renewable options are limited. Toxic effects of these materials may be exacerbated by their nanoscale features.The LCA was carried out using the software SimaPro, and the Ecoinvent Life Cycle Inventory (LCI) database supplemented with available literature and patent information. Our results indicate that while QDPV modules have shorter Energy PayBack Time (EPBT), lower Global Warming Potential (GWP), SO_x and NO_x emissions than other types of PV modules, they have higher heavy metal emissions, underscoring the need for investigation of emerging technologies, especially nano-based ones, from a life cycle perspective. QDPV modules are better in all impact categories assessed than carbon-based energy sources but they have longer EPBT than wind and hydropower and higher GWP.