Enzyme-Retted Flax Fiber and Recycled Polyethylene Composites

Municipal solid wastes generated each year contain potentially useful and recyclable materials for composites. Simultaneously, interest is high for the use of natural fibers, such as flax (Linum usitatissimum L.), in composites thus providing cost and environmental benefits. To investigate the utility of these materials, composites containing flax fibers with recycled high density polyethylene (HDPE) were created and compared with similar products made with wood pulp, glass, and carbon fibers. Flax was either enzyme- or dew-retted to observe composite property differences between diverse levels of enzyme formulations and retting techniques. Coupling agents would strengthen binding between fibers and HDPE but in this study fibers were not modified in anyway to observe mechanical property differences between natural fiber composites. Composites with flax fibers from various retting methods, i.e., dew- vs. enzyme-retting, behaved differently; dew-retted fiber composites resulted in both lower strength and percent elongation. The lowest level of enzyme-retting and the most economical process produces composites that do not appear to differ from the highest level of enzyme-retting. Flax fibers improved the modulus of elasticity over wood pulp and HDPE alone and were less dense than glass or carbon fiber composites. Likely, differences in surface properties of the various flax fibers, while poorly defined and requiring further research, caused various interactions with the resin that influenced composite properties.     

Stabilization and utilization of hospital waste as road and asphalt aggregate

This article reports the operational results of the effective utilization of hospital waste molten slag produced using a high-temperature melting system, and being operated at a hospital in Selangor, Malaysia. The hospital waste is incinerated and subsequently melted at 1200°C. Scanning election microscope (SEM)/EDX results showed that the slag produced after melting contained amounts of SiO₂, CaO, and Al₂O₃ in excess of 53%, 9%, and 16%, respectively. The results from a leaching analysis on the slag produced proved that the melting process had successfully stabilized the heavy metals. The use of this slag as an alternative material to replace conventional aggregates for road construction was studied. The results from aggregate and asphalt mix tests showed that the slag produced fulfills all the requirements of an alternative aggregate. The average asphalt content, or the optimum asphalt content to be mixed with hospital waste molten slag, was found to be about 5.53%.     

矿渣与工业废渣改良黄土的性能与机理研究进展

黄土在世界上分布面积较广,在我国也有约60×104 km2的分布,具有湿陷性是其区别于其它区域性土的最显著特点,并由此引发造成各种地质灾害和工程问题.采用石灰、水泥或高分子材料等对其进行改性以达到消除湿陷性或提高黄土强度的目的,是岩土工程领域的重要课题.选用矿渣和工业废渣作为改性参料,用以研究改性黄土的力学特性变化和改...     

高浓度废液纳滤膜分离工艺设计

当进行高浓度废液纳滤膜分离工艺设计时,必须首先进行纳滤膜分离工艺试验,通过工艺试验确定：纳滤膜型号,完成膜的筛选工作;确定纳滤膜分离规律、分离模型、膜污染规律。利用获得的数学关系式确定主要操作运行压力、浓缩液流量、膜面积、组件数目、膜组件排列方式、冷却循环系统设计、纳滤膜污染的预测与清洗系统设计。纳滤膜清洗系统与自控系统应该根据试验结果并考虑纳滤膜生产商提供的数据进行设计。     

垃圾填埋场渗滤液运移规律分析与模拟

基于多孔介质流体力学、多相流以及土壤水动力学理论,利用理论分析和数值模拟相结合的方法,研究了垃圾填埋场中渗滤液运移过程的基本规律,并对填埋场底部可渗和不可渗2种情况下渗滤液的运移规律进行了模拟比对,研究成果可为填埋场渗滤液控制系统的设计和管理提供科学的理论依据和技术支持。     

浙江省危险废物和污泥处置现状及加强全过程监管工作的探讨

随着近几年经济发展水平的提高,浙江省的危险废物和污泥产生量呈不断增长趋势,它们的产生、贮存、转运和处置过程中的监管压力也逐年增大。总结了浙江省的危险废物产生现状,分析了存在的主要问题,对比了发达国家的相关管理经验,提出了进一步完善浙江省危险废物和污泥全过程监管工作的建议。     

Groundwater Pollution Around an Industrial Area in the Coastal Stretch of Maharashtra State, India

The main objective of this paper is to examine pollution threat, especially to the groundwater resources, around Tarapur industrial area (also called the Tarapur MIDC area) located on the Arabian Sea Coast in Thane District of Maharashtra State, India and suggest remedial measures that may also be relevant to other industrial areas on the Indian Sea Coast. One hundred and thirty one samples were collected from various sources, such as dugwells, borewells, dug-cum-borewells, effluent sumps, drainage channels (effluent channels), creeks and ocean, for chemical analyses. These analyses show that the area in general is characterized by hard water and high salinity hazard, possibly due to its proximity and hydraulic connection with the sea. Although the potability of groundwater is questionable in certain pockets, it is good enough for irrigation purposes at present. Low pH value and high heavy metal contents in the adjoining Muramba creek water is a matter of great concern and may be attributed to the indiscriminate disposal of industrial effluents to the drainage channels connecting the creek. Muramba Creek is well connected with the Arabian Sea, and there are evidences of seawater intrusion around this creek. Because of the fact that Muramba Creek is highly polluted, and is hydraulically connected with the dugwells and borewells surrounding the creek, it cannot be ruled out that the groundwater around this creek is susceptible to contamination. Unless measures are not taken immediately to stop the indiscriminate disposal of the solid wastes and liquid effluents in open ground and drainage channels, and measures are not taken to maintain the appropriate pH values at the effluent treatment facilities before their disposal, the problem would indeed be formidable one day, and it will be too late then for the authorities to take care of the resulting maladies. Few suggestions have been given for controlling and managing the industrial pollution around the Tarapur MIDC area. These suggestions are relevant to other industrial areas situated on the 7,000 km long Indian Sea Coast.     

Relation of waste generation and composition to socio-economic factors: a case study

To develop an effective waste management strategy for a given region, it is important to know the amount of waste generated and the composition of the waste stream. Past research has shown that the amount of waste generated is proportional to the population and the average mean living standards or the average income of the people. In addition, other factors may affect the amount and composition of waste. These are climate, living habits, level of education, religious and cultural beliefs, and social and public attitudes. This paper presents the findings of a study carried out in a suburban municipal area in Sri Lanka to determine the solid waste generation rate and waste composition based on field surveys and to determine the related socio-economic factors. A database was developed that included information on the quantity and composition of waste generated in a sample of households in the study area over a time period. The collected data was analysed to relate waste generation and composition data to various socio-economic factors. Over 400 sample households were selected for the study using a stratified random sampling methodology based on municipal wards and property values. A technique that considers both the number of households in a particular income group (property value range) and the standard deviation of property values within a given income group was used to determine the appropriate sample size for each municipal ward. Through category and regression analyses, the quantities of waste and waste composition were related to several socio-economic factors. The paper describes the basis for the sample selection, the methodology adopted for data collection, the socio-economic parameters used for the analysis, and the relationships developed from the analysis.     

生物过滤技术在大气污染控制中的应用

生物过滤是控制大气污染的经济有效技术,具有较好的发展前景。本文介绍了生物过滤技术处理废气的研究,应用历史,现状,和生物过滤理论,分析了工艺的使用范围,设计及运行控制要点,列举了应用的范例。     

用废腈纶制备高分子增稠剂

以废腈纶为原料，经碱法水解反应和扩链反应制取乳液用高分子增稠剂。水解工艺条件为水解温度95℃，水解时间4h；水解配方为m(PAN)：m(NaOH)：m(H2O)=1：0．6：5；扩链反应温度95℃，扩链反应时间约4h。对不同乳液体系进行的增稠性能评价及应用表明，利用该技术制备出的高分子增稠剂性能优良，应用范围广泛。现已建成一套生产能力为1000t/a的工业装置。