V2O5-WO3/TiO2脱硝催化剂的制备及其性能

对选择性催化还原脱硝用催化剂V2O5-WO3/TiO2的制备工艺进行了实验研究.采用溶胶-凝胶法制得TiO2凝胶,对凝胶进行不同条件下的干燥和煅烧处理,然后通过浸渍法在TiO2上依次负载WO3和V2O5,最终得到V2O5-WO3/TiO2催化剂.结果表明,TiO2凝胶的处理温度对催化剂结构和脱除NO的性能有一定的影响,TiO2凝胶干燥温度为105 ℃时制得的催化剂活性较高,在实验条件下NO脱除率最高可达98.3%.     

A Simulation of Temporal and Spatial Variations in Carbon at Landscape Level: A Case Study for Lake Abitibi Model Forest in Ontario,Canada

Using a case study of the Lake Abitibi Model Forest (LAMF), this study aims to assess the temporal and spatial variability in carbon storage during 1990–2000, and to present a comprehensive estimation of the carbon budget for LAMF's ecosystems. As well, it provided the information needed by local forest managers to develop ecological and carbon-based indicators and monitor the sustainability of forest ecosystems. Temporal and spatial carbon dynamics were simulated at the landscape level using ecosystem model TRIPLEX1.0 and Geographical Information System (GIS). The simulated net primary productivity (NPP) and carbon storage in forest biomass and soil were compared with field data and results from other studies for Canada's boreal forests. The results show that simulated NPP ranged from 3.26 to 3.34 tC ha⁻¹ yr⁻¹ in the 1990s and was consistent with the range measured during the Boreal Ecosystem-Atmosphere Studies (BOREAS) in central Canada. Modeled NPP was also compared with the estimation from remote sensing data. The density of total above-and belowground biomass was 125.3, 111.8, and 106.5 tC ha⁻¹ for black spruce, trembling aspen, and jack pine in the LAMF ecosystem, respectively. The total carbon density of forested land was estimated at 154.4 tC ha⁻¹ with the proportion of 4:6 for total biomass and soil. The analysis of net carbon balance of ecosystem suggested that the LAMF forest ecosystem was acting as a carbon sink with an allowable harvest in the 1990s.     

有机气溶胶的来源与形成研究现状

介绍了有机气溶胶来源与形成的研究现状,从有机气溶胶的化学组成特征、一次有机气溶胶的来源和二次有机气溶胶的形成机制论述其研究进展.一次有机气溶胶主要来源于烹调油烟、机动车排放、生物质燃烧、工业或民用燃油锅炉释放出的有机物,还有道路扬尘、沥青、刹车尘、轮胎屑、室外香烟烟雾、以及高等植物蜡、细菌活动和草本植物等.大气中的半挥发性有机物可通过物理和化学吸附形成二次有机气溶胶,一些挥发性有机物可通过气相化学反应转化为低挥发性的物质并形成二次有机气溶胶,其主要前体物是芳香族化合物,如苯、甲苯、二甲苯,以及烯烃、烷烃、环烷烃、萜烯和生物排放的非饱和氧化物.     

危险废物安全填埋场运行机制与收费标准

危险废物安全填埋场应探讨企业化经营模式。在单一处理模式、一体化经营模式和依托于大型企业模式中选择适宜的模式。填埋场建设资金筹集渠道中,由废物产生单位集资建设是可行办法。探讨了填埋场收费标准的计算方法,并给出计算公式。     

Molecular behavior and interactions with microbes during anaerobic degradation of bio-derived DOM in waste leachate

It is the key to control bio-derived dissolved organic matters (DOM) in order to reduce the effluent concentration of wastewater treatment, especially for waste leachate with high organic contaminants. In the present study, the anaerobic degradation of aerobically stabilized DOM was investigated with DOM substrate isolated through electrodialysis. The degradation of bio-derived DOM was confirmed by reduction of 15% of total organic carbon in 100 days. We characterized the molecular behavior of bio-derived DOM by coupling molecular and biological information analysis. Venn based Sankey diagram of mass features showed the transformation of bio-derived DOM mass features. Occurrence frequency analysis divided mass features into six categories so as to distinguish the fates of intermediate metabolites and persistent compounds. Reactivity continuum model and machine learning technologies realized the semi-quantitative determination on the kinetics of DOM mass features in the form of pseudo-first order, and confirmed the reduction of inert mass features. Furthermore, network analysis statistically establish relationship between DOM mass features and microbes to identify the active microbes that are able to utilize bio-derived DOM. This work confirmed the biological technology is still effective in controlling recalcitrant bio-derived DOM during wastewater treatment.     

酸性高氟废水处理试验研究

对某化工厂高氟酸性废水经过试验后，采用二级石灰－氯化钙沉淀絮凝法处理，出水的氟浓度达到了国家规定的一级排放标准，且系统运行稳定，工艺简便，易于施工和运行管理。     

气相色谱法测定二硫化碳和甲硫醚

利用气相色谱(配火焰光度检测器,采用3mxφ2mm玻璃填充柱分离)对CS2和甲硫醚(DMS)两种含硫化合物进行了分离检测。该方法具有较高的灵敏度和良好的线性关系。结果表明:该分析对含硫气体的最小检测浓度在mg/m3级,在柱温为70℃,检测器温度为180℃,气化室温度为150℃,氮气流速为50mL/min时,CS2的回收率为98.66%,变异系数为2.12%;甲硫醚的回收率为98.66%,变异系数为1.56%。     

医疗废物焚烧残余物固化技术初探

根据对医疗废物焚烧残余物中有毒有害物质的化验分析结果,确定焚烧残余物中有毒有害成分含量仍较高,部分指标超出标准值,必须对其进行稳定化/固化处理,避免对土壤及地下水环境造成污染.本文阐述了稳定化/固化处理原理及处理工艺,使医疗废物无害化、减量化和资源化的处理原则得以全面实现.     

胶粉的生产利用现状及前景分析

废橡胶作为工业垃圾 ,已为世界所公认 ,介绍了废橡胶回收利用的意义和方法 ,着重阐述了胶粉的生产利用现状 ,并简要分析了胶粉的生产利用前景     

铁炭内电解法处理染料废水的试验

文章采用铁屑一活性炭内电解法作为光合细菌生化处理染料废水的预处理方法，考查了3个主要影响因素（铁炭比、停留时间、初始pH值）。结果表明，最佳的处理条件为：铁炭比为7：3，pH值为5，停留时间为60min。在上述最佳处理条件下，对初始COD为6790mg／L的染料废水处理效率可以达到66．1％，并且废水经预处理后可生化性得到大大提高，有利于后续生化处理的进行。