耕作改制对土壤肥力的影响

在长期定位监测的基础上,研究了耕作改制对土壤肥力的影响,结果表明,耕作改制后,肥料投入明显增加,养分平衡朝着有利于提高肥力的方向发展;因土、因作物进行配方施肥,并实行秸秆还田,则改制后土壤肥力能得到提高;合理耕作轮作,有利于解决地力矛盾和季节矛盾,实现高产、稳产、低成本。     

From Valuation to Governance: Using Choice Experiment to Value Street Trees

This paper reports a choice experiment used to estimate the value of street trees in the city center of Lodz, Poland, and the broader context of how valuation results helped to improve governance of urban ecosystem services in this city. Based on a simplified inventory of trees, we prepared a set of hypothetical programs which put varying emphasis on the different ways to increase the numbers of trees, along with different levels of a hypothetical tax that would have to be paid by respondents to implement a given program. Our study indicated that the 351 surveyed Lodz residents were willing to pay the highest price for greening those streets where currently there are few or no trees and confirmed the general importance of planting trees. The results provided an argument in the debate on the new development strategy for the city and helped to promote the concept of ecosystem services.     

纳米级铁粉脱氯降解四氯化碳

四氯化碳的生产和使用,给人类带来了较大危害.为此,采用纳米铁粉这一新方法对其进行脱氯处理.试验以纳米级铁粉对四氯化碳的脱氯率为考察指标,选用L25(56)正交试验方案,考察了降解介质的初始pH值、纳米铁粉的质量、降解温度、摇床转速和脱氯时间5个影响因素.结果表明,pH值这一因素有极显著影响;在得出的纳米铁粉对四氯化碳脱氯的最佳工艺条件下,获得了99.5%的脱氯率,为有机氯化物脱氯开辟了一条新途径.     

工业余热拆卸废旧电路板

电路板插槽元器件、通孔元器件、大元器件和小元器件的拆卸是废旧电路板资源化的第一步。前三者的拆卸率对后续的电路板粉碎有较大影响,是决定拆卸效果的重要参数。为探究工业余热拆卸废旧电路板方法中通气温度、加热时间和喷吹次数对元器件拆卸率的影响,找出最优的拆卸参数组合,进行了废旧电路板拆卸的正交实验。对元器件拆卸率、关键元器件总拆卸率的极差分析和方差分析表明,通气温度和加热时间的增大有利于元器件拆卸率增大;增加喷吹次数,有利于大元器件和小元器件的拆卸,但过多次数喷吹将造成插槽、通孔元器件引脚弯曲,拆卸率减小;通气温度、加热时间对元器件拆卸的影响不具显著性,喷吹次数仅对大元器件拆卸有显著性影响。综合分析关键元器件的拆卸率：通气温度350℃、加热时间5 min和喷吹6次是最优的拆卸参数组合,关键元器件总拆卸率达到98.6%。     

天然黄铁矿的除磷性能

除磷是控制水体富营养化的重要手段。为了考察黄铁矿的除磷特征,采用序批实验,分别研究了反应时间、初始磷浓度和干扰离子（NH4＋、NO3- 和SO24-）对黄铁矿除磷的影响。动力学表明,黄铁矿的除磷过程符合伪二级动力学模型。pH=6．5时,磷的平衡去除量为6．82mg／kg。Langmuir方程能较好描述黄铁矿除磷的吸附等温过程,其磷的饱和吸附量为11．01mg／kg。NH4＋、NO3-和SO24- 对黄铁矿除磷基本没有影响。磷的去除主要是通过铁磷沉淀和铁氧化物及氢氧化物的吸附,去除的磷主要以可被生物利用的Fe、Al-P形态存在。黄铁矿的这些除磷性能和机制对选取黄铁矿作为人工湿地填料实现同步脱氮除磷具有重要指导作用。     

混合重金属对硝化颗粒污泥毒性作用的析因实验研究

分别测定了Cu2 、Zn2 和Cd2 对硝化颗粒污泥的单一毒性,采用析因实验研究了二元和三元重金属混合体系对硝化颗粒污泥的联合毒性.结果表明,Cu2 、Zn2 和Cd2 的2 h半抑制浓度EC50分别为95.23、62.11和12.48 mg/L,由析因实验所得的响应曲面模型具有较好的优度(其R2＞0.95),能够对混合体系的联合毒性很好地进行预测,析因实验可以用于环境领域混合体系联合毒性的研究.     

一起钢质无缝气瓶爆炸事故技术分析

文章简要描述了一起消防气体灭火钢质气瓶爆炸事故,对爆炸气瓶进行了断口分析、金相试验和理化试验,并分析了事故的原因,提醒制造厂家规范制造工艺,对预防类似事故的发生具有一定的参考意义。     

Pool evaporation: Experimental tests at medium-scale with gasoline

Pool evaporation is a major source of flammable vapour clouds. Predicting the evaporation rate of a liquid hydrocarbon pool is therefore a key issue of dispersion modelling for safety concerns. This paper presents small- and medium-scale experiments of pool evaporation carried out with liquid hydrocarbons (pentane, heptane), hydrocarbon “gasoline-like” mixtures and gasoline. Liquid mass loss was measured and the evaporation rate deduced with its evolution in time. Other observations are highlighted, regarding the evolution of liquid temperatures, mixture compositions, and scale effects like the influence of pool length on surface evaporation rate. Comparisons with well-known correlations are then shown. The authors finally suggest a new semi-empirical correlation with a set of parameters fitted on the performed experiments.     

Robustness testing of a free-fall triboelectric separation process for plastic waste recovery

Among the separation techniques used in industries, the triboelectric separation of insulating particles using a rotary tube is an effective way employed in the waste recovery of plastic and mineral products. This process, also called free-fall triboelectric separation, is widely used for the sorting of granular mixtures resulting from industrial plastic wastes. Given that the robustness of such a separation process is an important issue, a standard procedure is used for determining the set point and for minimising the process sensitivity of sorting mixed particles of different polymers to changes in the values of some critical factors. The aim of this paper was to analyse the efficiency of the triboelectric separation process of polymers with respect to any slight variation in the values of the most significant factors. Experiments with a sample of high-density polyethylene and polyvinyl chloride plastic granules were carried out on a laboratory experimental bench. Several one-factor-at-a-time experiments, followed by two factorial designs (one composite and the other fractional), were performed based on the following experimental procedure: (1) determination of the variation limits of the input variables; (2) identification of the set point and (3) robustness testing of the process, i.e. testing whether the performance of the system remains high even when the factors vary slightly around the set point.