A Technicoeconomic Approach for the Selection of a Site Remediation Strategy—Part A: Theory

A technicoeconomic model is developed to select an optimal strategy for the remediation of a contaminated site and to determine the value of this remediation strategy. The model is an extension of actual cost–benefit analysis, with consideration of “irreversible” remediation technology choices, technology effectiveness, and uncertainty on the site's level of contamination. The model considers the possibility of reducing uncertainty by both acquiring more and better information on the level of contamination and by offering the decision-maker the opportunity to reevaluate his decision and switch to a more appropriate technology. It is believed that this model will help decision-makers in the selection of a remediation strategy by presenting all potentially feasible strategies, and how uncertainty on the site's level of contamination affects these strategies.     

Commercial Medicinal Plant Extraction in the Hills of Nepal: Local Management System and Ecological Sustainability

This paper presents a case study from Jumla District, Nepal, investigating local management systems and ecological sustainability of commercial collection of a medicinal plant, spikenard (Nardostachys grandiflora DC, Valerianaceae), growing in alpine meadows. Interviews were undertaken with local collectors, traders, and district forest office staff, and the dynamics of people–plant interactions are analyzed using the Oakerson model. In all, 110 sample plots 1m square were laid out in three areas with differing collection and grazing pressures for recording of floristic composition and abundance of spikenard root biomass. Comparisons show significantly more root biomass in uncollected than collected areas with local management and the interpretation of differences in abundance is discussed. The combination of qualitative and quantitative investigations can provide a framework for the study of people–plant interactions, and this study can serve as first step in a compilation of cases to create a more detailed picture of local management systems of Nepali nontimber forest products in general and commercially collected medicinal and aromatic plants in particular.     

Use of Life Cycle Assessment in Environmental Management

The aim of this paper is to demonstrate how life cycle assessment (LCA) can be used to develop strategic policies that can lead to a minimization of the environmental burden resulting from the provision of services or the manufacture, use, and disposal of products within the economy. We accomplish this aim by presenting a case study that evaluates the greenhouse gas contributions of each stage in the life cycle of containerboard packaging and the potential impact on emissions of various policy options available to decision-makers. Our analysis showed that, in general, the most useful strategy was to recycle the used packaging. However, our analysis also indicated that when measures are taken to eliminate sources of methane emissions, then recycling is no longer beneficial from a greenhouse perspective. This is because the process energy required in the form of gas and electricity is substantially greater for containerboard manufactured from recycled material than it is for virgin fiber.     

Human actions, the survival of keystone species, and the resilience of ecological–economic systems

Human (managerial) actions affect the survival probabilities of the keystone species of an ecological–economic system. In turn, the well-being of these keystone species translates into the well-being or the resilience of the underlying ecological–economic system. What are the theoretical connections between human actions, keystone species survival, and the resilience of ecological–economic systems? In this note, we construct a simple stochastic model to draw out the links between this trinity.     

The time-varying factors influencing the recycling rate of products

In Europe targets have been laid down by EU legislation for the recycling rate of end-of-life vehicles to be achieved within the nearby future. It is illustrated in this paper that the definition of the recycling rate and the realisation of the imposed targets are very much dependent on different parameters such as the changing lifetime of the product and product design. It may seem obvious that the recycling rate is determined by various time-varying factors, however, this paper endeavours to describe and quantify the role of these factors on the recycling rate over time by the use of a dynamic systems model. This model permits the prediction of the recycling rate as a function of the numerous presented parameters, changing design scenarios etc. In addition, different definitions of the recycling rate will be presented and discussed. This will lead to a better understanding of the parameters affecting the recycling system and a more precise understanding of the recycling targets and their realisation as imposed by EU legislation. This paper focuses on cars, but the discussion and the definitions derived are equally valid for any end-of-life product.     

箱形长钢梁内焊接危害分析与对策

大跨度起重机箱形梁,因结构强度的要求,需要从两端进入梁内施焊。由于截面小、长度大,作业中产生大量烟尘、毒气,不能及时排出,严重损害工人身体健康。特别在高温季节,焊接热又使梁内温度增高,操作者闷热难忍,危害身心健康,影响工作效率。本文在实验研究基础上,分析了箱形长钢梁内多人焊接时,产生的烟尘、毒气及其分布情况,并“以人为中心”,剖析各种解决焊接危害技术的特点,提出适用于截面在1～2m~2、长度在30～50m范围的钢梁内多人施焊时的排烟降温对策。     

Birth of a megaproject: Political economy of flood control in bangladesh

A major flood control initiative has been launched in Bangladesh under the coordination of the World Bank. The bank's five-year Action Plan is intended to initiate a long-term investment program, the specifics of which remain to be determined. Long-term proposals under consideration include the construction of massive embankments along the great rivers of the Bangladesh delta. The wisdom of such a “structural solution” to Bangladesh's flood problems can be questioned on economic, environmental, and technical grounds. Regrettably, the decision-making process has not encouraged wide debate on these questions.     

Evolutionary or fragmented environmental policy making? coal,power, and agriculture in the Hunter Valley,Australia

Intensified surface mining, power generation, and smelting operations in the Hunter River lowlands, NSW, Australia have posed numerous new environmental management problems. Legislative controls over water, soils, and land use management have been clearly insufficient and remain so. The complex range of environmental changes is challenging government agencies as well as coal developers. While water demands are increasing in the region the proportionally greatest competitors are power generation and irrigation. Comprehensive regional water quality assessment is inadequate and divided between a number of agencies with fragmentary interests. Coal development inquiries signal further controversy over appropriate management solutions and are an ongoing phenomenon in the region. The early 1980s resource boom has been followed by lower rates of economic growth, which have resulted in disparate agency responses to major ongoing environmental questions. While issue attention cycles are often remarkably short in environmental management, matters of water, land, and air quality require intensive and ongoing monitoring and policy development.     

贫困山区矿产资源的开发战略

合理开发矿产资源，优化资源配置和产品结构，是贫困山区脱贫致富的实现选择，本文以北川县为例，立足市场需求和该县矿产资源，地理，经济等情况，综合分析了有利条件和制约因素，提出了开发北川矿产资源的战略指导思想，目标，重点和主要对策。     

PREDICTION OF PEAK FLOWS ON SMALL WATERSHEDS IN OREGON FOR USE IN CULVERT DESIGN1

ABSTRACT: Using data from 80 Oregon watersheds that ranged in size from 0.54 km² to 27.45 km², equations were developed to predict peak flows for use in culvert design on forest roads. Oregon was divided into six physiographic regions based on previous studies of flood frequency. In each region, data on annual peak flow from gaging stations with more than 20 years of record were analyzed using four flood frequency distributions: type 1 extremal, two parameter-log normal, three parameter-log normal, and log-Pearson type III. The log-Pearson type III distribution was found to be suitable for use in all regions of the State, based on the chi-square goodness-of-fit-test. Flood magnitudes having recurrence intervals of 10, 25, 50, and 100 years were related to physical and climatic characteristics of drainage basins by multiple regression. Drainage basin size was the most important variable in explaining the variation of flood peaks in all regions. Mean basin elevation and mean annual precipitation were also significantly related to flood peaks in two regions of western Oregon. The standard error of the estimate for the regression relationships ranged from 26 to 84 percent.