海水水质评价的倍斜率隶属函数聚类法

建立了宽域式倍斜率聚类的海水水质评价模式，其函数的右侧斜度为左侧斜率的２倍，勿求权重，直接聚类，海水水质评价实例说明，本文模糊综合评判法和灰色聚类法和更为合理，实用。     

Neutron activation method in the analysis of environmental objects

ＮｅｕｔｒｏｎａｃｔｉｖａｔｉｏｎｍｅｔｈｏｄｉｎｔｈｅａｎａｌｙｓｉｓｏｆｅｎｖｉｒｏｎｍｅｎｔａｌｏｂｊｅｃｔｓＧ．Ｍ．Ｋｏｌｅｓｏｖ（Ｖ．Ｉ．ＶｅｒｎａｄｓｋｙＩｎｓｔｉｔｕｔｅｏｆＧｅｏｃｈｅｍ。＆Ａｎａｌ．Ｃｈｅｍ．，ＲｕｓｓｉａｎＡｃａｄ...     

Soil and water loss in the Lancang River-Mekong River watershed (in Yunnan section, China) and its control measures

ＭｅｋｏｎｇＲｉｖｅｒｉｓｏｒｉｇｉｎａｔｅｄｉｎｔｈｅｎｏｒｔｈｅｒｎｒａｎｇｅｏｆＴｉｂｅｔＱｉｎｇｈａｉＰｌａｔｅａｕｏｆＣｈｉｎａ,ｆｌｏｗｉｎｇｔｈｒｏｕｇｈｓｉｘｃｏｕｎｔｒｉｅｓ,ｔｈｅｙａｒｅＣｈｉｎａ(ＹｕｎｎａｎＰｒｏｖｉｎｃｅ),Ｍ?..     

COD/SO_4~(2-)值对硫酸盐还原率的影响

研究利用 UASB反应器考察了 COD和硫酸盐浓度的比值对硫酸盐还原的影响 ,同时分析了硫酸盐还原菌和产甲烷菌对COD的竞争情况 .发现在 HRT为 3.8h,SO2 -4 负荷为 6～ 7kg· ( m3· d) - 1 ,SO2 -4 浓度为 1 0 0 0 mg· L- 1 条件下 :1在 COD不足时 ,SRB与 MPB在竞争中占微弱优势 ;对于产甲烷活性比较好的厌氧污泥要经过较长的时间 ,SRB才能确立优势菌种的地位 .2 COD/ SO2 -4 比值决定了 SO2 -4 的去除率 .比值等于 2时 ,SO2 -4 的还原率在 95%以上 ;当比值为 1 .5时 ,SO2 -4 还原率为 75% ;当比值为 1时 ,SO2 -4 的还原率为 60 % .     

GW型加热炉烟气净化系统研究设计

为适应日益严格的环保要求,根据GW型燃油加热炉烟气排放特征和排放规律,设计采用循环流化床工艺进行除尘脱硫。中试结果表明:在最佳工况条件下,系统除尘效率可达97%～98%,脱硫效率达80%～90%,达到国家燃油锅炉一类区域排放标准要求。     

电凝聚处理轧制乳化废水的研究

用电凝聚法处理轧制乳化废水,探讨了影响破乳的各种因素,确定了最佳处理条件。研究结果表明:该法处理轧制乳化废水的效果很好,浊度去除率可达99.6%,COD去除率达99.5%。此外,还发现电凝聚法的处理效果优于药剂絮凝法。     

全程自养脱氮工艺的研究

以悬浮填料床作为全程自养脱氮反应器，用不含有机碳的合成氨氮废水进行反应器的启动。系统的氨氮和总氮去除率分别达80％和60％左右。通过批式实验对全程自脱氮做进一步的研究。结果表明，通过控制反应器中DO的浓度，可以控制氨氧化和反硝化的比率；当DO为0.8mg/L时，氨氮几乎完全转化为氮气，氨氧化和反硝化在此时达到了动态平衡；在低DO情况下，氨氮和亚硝氮同时存在，氨氮和总氮的转化率都大幅度的提高，说明氨氮可以亚硝氮为电子受体，在无外加有机碳源的情况下进行反硝化。     

湖泊、水库水的强化混凝除藻的试验研究

就高锰酸钾复合药剂强化混凝对湖泊、水库水中藻类的去除进行了研究，试验表明：投加一定量的高锰酸钾复合药剂可显著提高水中藻类的去除率。将经与预氯化、预投加高锰酸钾除藻工艺进行比较，表明高锰 酸钾复合药剂强化混凝除藻效率明显优于传统预氯化、预投加高锰酸钾除藻工艺。     

Environmental aftermath of the radiation accident at Tomsk-7

An analysis is presented of the environmental effects of the most serious radiation accident recorded after Chernobyl, which occurred in the formerly secret town of Tomsk-7 in Siberia, Russia, on 6, April 1993. Fortunately, it appears not to have become a major industrial crisis or disaster. The causes of the accident are described. It is argued that a mixture of both objective and subjective prerequisites, including specific human, organizational, and technological factors, were responsible for the explosion or directly facilitated it. The Tomsk-7 accident's ecological, medical, social, and psychological consequences are discussed.     

Synthesis and biodegradation of poly(γ-butyrolactone-co-l-lactide)

Biodegradable polyesters were synthesized by ring-opening copolymerization of -butyrolactone (BL) and its derivatives withl-lactide (LLA). Although tetraphenyl tin was the main catalyst used, other organometallic catalysts were used as well.¹H and¹³C NMR spectra showed that poly(BL-co-LLA)s were statistical and that their number-average molecular weights were as high as 7×10⁴. The maximum BL content obtained from copolymerization BL/LLA was around 17%. TheT _m andT _g values of the copolymers showed a gradual depression with an increase in BL content. NoT _m was obtained for the copolymers containing more than 13 mol% BL. The biodegradability of the copolyesters was evaluated by enzymatic hydrolysis and nonenzymatic hydrolysis tests. The enzymatic hydrolysis was carried out at 37°C for 24 h using lipases fromRhizopus arrhizus andR. delemar. Hydrolyses by both lipases showed that an increase in BL content of the copolymer resulted in enhanced biodegradability. Nonenzymatic accelerated hydrolysis of copolymers at 70°C was found to increase proportionally to their exposure time. The hydrolysis rate of these copolymers was considerably faster than that of PLLA. The higher hydrolyzability was recorded for the BL-rich copolymers. The copolymerization of -methyl--butyrolactone (MBL) or -ethyl--butyrolactone (EBL) with LLA resulted in relatively LA-rich copolymers.