Botswana's environmental policy on recycling

Recycling operations have become one of the primary strategies for waste management, worldwide. Especially, recycling operations are viewed as among the most effective techniques for reducing the amount of municipal solid waste disposed at landfill sites. Botswana's environmental policy on recycling stipulates, among others, that all waste management authorities should provide information on the classification and quantities of controlled waste targeted for recycling. This paper, therefore, examines the extent to which recycling operations in Botswana have either been conducted in compliance with or in violation of some major environmental requirements as enunciated on statutory guidelines. Compatibility between environmental policies on recycling and actual practice is evaluated focusing on two companies (Dumatau trading and Botswana Tissue) involved in recycling operation. Data from the two companies is complemented by one collected from the Gaborone landfill site. Finally, this study discusses on the role played by various stakeholders in policy formulation and implementation with particular emphasis being placed on a select number of non-governmental organisations (NGO).     

Environmental cost of using poor decision metrics to prioritize environmental projects

Conservation decision makers commonly use project‐scoring metrics that are inconsistent with theory on optimal ranking of projects. As a result, there may often be a loss of environmental benefits. We estimated the magnitudes of these losses for various metrics that deviate from theory in ways that are common in practice. These metrics included cases where relevant variables were omitted from the benefits metric, project costs were omitted, and benefits were calculated using a faulty functional form. We estimated distributions of parameters from 129 environmental projects from Australia, New Zealand, and Italy for which detailed analyses had been completed previously. The cost of using poor prioritization metrics (in terms of lost environmental values) was often high—up to 80% in the scenarios we examined. The cost in percentage terms was greater when the budget was smaller. The most costly errors were omitting information about environmental values (up to 31% loss of environmental values), omitting project costs (up to 35% loss), omitting the effectiveness of management actions (up to 9% loss), and using a weighted‐additive decision metric for variables that should be multiplied (up to 23% loss). The latter 3 are errors that occur commonly in real‐world decision metrics, in combination often reducing potential benefits from conservation investments by 30–50%. Uncertainty about parameter values also reduced the benefits from investments in conservation projects but often not by as much as faulty prioritization metrics.     

Toward Cyborg PPGIS: exploring socio-technical requirements for the use of web-based PPGIS in two municipal planning cases,Stockholm region,Sweden

Web-based Public Participation Geographic Information Systems (PPGIS) are increasingly used for surveying place values and informing municipal planning in contexts of urban densification. However, research is lagging behind the rapid deployment of PPGIS applications. Some of the main opportunities and challenges for the uptake and implementation of web-based PPGIS are derived from a literature review and two case studies dealing with municipal planning for urban densification in the Stockholm region, Sweden. A simple clustering analysis identified three interconnected themes that together determine the performance of PPGIS: (i) tool design and affordances; (ii) organisational capacity; and (iii) governance. The results of the case studies augment existing literature regarding the connections between the different socio-technical dimensions for the design, implementation and evaluation of PPGIS applications in municipal planning. A cyborg approach to PPGIS is then proposed to improve the theoretical basis for addressing these dimensions together.     

Formic acid as an alternative reducing agent for the catalytic nitrate reduction in aqueous media

Formic acid was used for the nitrate reduction as a reductant in the presence of Pd:Cu/γ-alumina catalysts. The surface characteristics of the bimetallic catalyst synthesized by wet impregnation were investigated by SEM, TEM-EDS. The metals were not distributed homogeneously on the surface of catalyst, although the total contents of both metals in particles agreed well with the theoretical values. Formic acid decomposition on the catalyst surface, its influence on solution pH and nitrate removal efficacy was investigated. The best removal of nitrate (50 ppm) was obtained under the condition of 0.75 g/L catalyst with Pd:Cu ratio (4:1) and two fold excess of formic acid. Formic acid decay patterns resembled those of nitrate removal, showing a linear relationship between kf (formic acid decay) and k (nitrate removal). Negligible amount of ammonia was detected, and no nitrite was detected, possibly due to buffering effect of bicarbonate that is in situ produced by the decomposition of formic acid, and due to the sustained release of H2 gas.     

九龙江河口区夏季反硝化作用初探

河口反硝化是削减入海河流氮污染的重要途径,为探明地处亚热带的九龙江河口混合区的反硝化作用,于2010年7月开展13个站位的面上调查,利用N2：Ar法和膜进样质谱分析仪（MIMS）直接测定反硝化产物溶解N2浓度,用吹扫捕集-气相色谱法测定溶解N2O浓度,并估算二者净增量和水气交换通量.结果表明,溶解N2和N2O净增量有明显的区域变化,从淡水端向海域减少,N2净增量为-9.9～66.8μmol.L-1,N2O净增量为4.3～31.5 nmol.L-1;N2O饱和度为170%～562%,平均352%;N2水气通量为-2.9～53.2 mmol.（m2.d）-1,N2 O水气通量为5.2～23.9μmol.（m2.d）-1,N2 O通量占总通量的0.03%～1.2%（平均0.25%）.温度和营养盐（氮、磷）是影响九龙江河口区反硝化作用的重要因子;淡水端（盐度〈0.5）反硝化作用及其空间分布主要受硝酸盐含量控制,海水端溶解N2与N2O的增加主要来自淡水端的输送,并受盐度梯度（混合作用）影响.     

ISO 14001 certification and financial performance: selection-effect versus treatment-effect

The paper explores the bi-directional relationship between ISO 14001 certification and financial performance with the aim of shedding light on whether better performance is due to the beneficial effects of ISO 14001 or due to selection-effects where better performance precedes accreditation. The study uses a five year longitudinal analysis to compare the financial performance of firms in Spain before and after certification. The results of a multivariate panel data analysis find that firms with better than average performance have a greater propensity to pursue accreditation but there is no evidence that improvements in performance follow certification. This suggests that the inference that environmental variables cause improved financial performance may be unwise in research studies that can only measure association.     

清洁生产与ISO14000环境管理体系关系的初探

从ISO14000环境管理体系与清洁生产两者产生的背景及涵义出发,讨论了两者的同一性和差异性,提出了在21世纪的新形势下,把清洁生产与ISO14000两者有机的结合,是实现可持续发展的重要手段。     

The impact of ISO 14001 on corporate environmental performance: a study of Swedish manufacturing firms

The debate concerning the environmental effectiveness of environmental management systems (EMS) based on ISO 14001 is still open and scholars have called for further studies that can explain the contrasting evidence in previous research. As a response, this study aims to contribute knowledge about the effects of ISO 14001-based EMS by presenting fact-based environmental data. The study focuses on changes in performance over a period of 12 years and includes both firms with an EMS (66 firms) and firms without one (50 firms). Consideration is given to the improvement efforts in the firms before EMS adoption making it possible to neutralize any selection effects where better environmental performance precedes ISO 14001 adoption. Analysis has been carried out using statistical methods for six different environmental areas. No statistically significant differences between certified and non-certified firms concerning the change in the rate of improvement could be found in any of the six areas. However, it can be suspected that EMS adoption has positive effects on energy use and waste production whereas the non-adopting firms seem to perform better concerning air emissions. These mixed results mirrors previous research, which is rather worrying considering the worldwide popularity of EMS based on ISO 14001 in industry.     

Clam shell catalyst for continuous production of biodiesel

Continuous flow transesterification of waste frying oil (WFO) with methanol for the biodiesel production was tested in a laboratory scale jacketed reactive distillation (RD) unit packed with clam shell based CaO as solid catalyst. The physiochemical properties of the clam shell catalysts were characterized by X-ray Diffraction (XRD), Brunauer–Emmett–Teller (BET), Scanning Electron Microscopy (SEM), and Energy Dispersive Atomic X-ray Spectrometry (EDAX). The effects of the reactant flow rate, methanol-to-oil ratio, and catalyst bed height were studied to obtain the maximum methyl ester conversion. Reboiler temperature of 65°C was maintained throughout the process for product purification and the system reached the steady state at 7 hr. The experimental results revealed that the jacketed RD system packed with clam shell based CaO showed high catalytic activity for continuous production of biodiesel and a maximum methyl ester conversion of 94.41% was obtained at a reactant flow rate of 0.2 mL/min, methanol/oil ratio of 6:1, and catalyst bed height of 180 mm.     

维修时间不确定性下配电网灾后维修队安排的鲁棒恢复研究*

为最小化灾后配电网损失量,准确描述完整维修队工作时间（分为路途时间与具体维修时间）,依据台风路径对维修队所需路途时间进行分类,并利用期望概率描述具体维修时间的不确定性。建立2阶段分布式鲁棒优化模型,采用CCG算法分析国内某地区配电网算例发现:考虑维修时间不确定性可以有效减少配电网损失量。