室内空气PM_(2.5)污染的国内研究现状及综合防控措施

良好的室内空气质量是健康人居的必要条件。PM2.5是影响日常室内空气质量的主要因素。中国室内PM2.5污染程度较重,其主要的污染来源有:吸烟、生活燃料燃烧、烹饪和清扫等室内活动以及室外大气颗粒物的渗透作用等。同时,文章就如何减轻室内空气的PM2.5污染提出多方面的综合防控措施。     

钝顶螺旋藻突变株FBL的生理特性

利用倍频Ｎｄ：ＹＡＧ激光（λ＝５３２ｎｍ,ｐ＝５００ｍＷ,Ｓ＝１６０ｍＷ／ｃｍ＾２）对钝顶螺旋藻进行诱变处理,辐照１０ｍｉｎ,经分离获得藻丝开矿变成直形的钝顶螺旋突变株ＦＢＬ。对该变株ＦＢＬ的生长特性、藻多糖、氨基酸、β－胡萝卜素、叶绿素ａ等生化组成的研究。结果表明：与出发株相比,突变株ＦＢＬ生长速度加快;β－胡萝卜素含量提高２２．３％;藻多糖提高４２．０％;氨基酸增幅５．２％,氨基酸的组成比例发     

Clam shell catalyst for continuous production of biodiesel

Continuous flow transesterification of waste frying oil (WFO) with methanol for the biodiesel production was tested in a laboratory scale jacketed reactive distillation (RD) unit packed with clam shell based CaO as solid catalyst. The physiochemical properties of the clam shell catalysts were characterized by X-ray Diffraction (XRD), Brunauer–Emmett–Teller (BET), Scanning Electron Microscopy (SEM), and Energy Dispersive Atomic X-ray Spectrometry (EDAX). The effects of the reactant flow rate, methanol-to-oil ratio, and catalyst bed height were studied to obtain the maximum methyl ester conversion. Reboiler temperature of 65°C was maintained throughout the process for product purification and the system reached the steady state at 7 hr. The experimental results revealed that the jacketed RD system packed with clam shell based CaO showed high catalytic activity for continuous production of biodiesel and a maximum methyl ester conversion of 94.41% was obtained at a reactant flow rate of 0.2 mL/min, methanol/oil ratio of 6:1, and catalyst bed height of 180 mm.     

维修时间不确定性下配电网灾后维修队安排的鲁棒恢复研究*

为最小化灾后配电网损失量,准确描述完整维修队工作时间（分为路途时间与具体维修时间）,依据台风路径对维修队所需路途时间进行分类,并利用期望概率描述具体维修时间的不确定性。建立2阶段分布式鲁棒优化模型,采用CCG算法分析国内某地区配电网算例发现:考虑维修时间不确定性可以有效减少配电网损失量。     

分子筛生产废水中悬浮物的絮凝与回用

对分子筛生产废水进行了絮凝沉降分离试验，确定了絮凝剂、助凝剂及絮凝敢分离条件。试验结果表明，絮凝沉降所得到的絮凝物料的化学组成、结构、性能与絮凝前原废水中的悬浮物基本一致，可返回原生产工序中使用。     

含氟废气对农业环境的影响

叙述了某厂氢氟酸生产过程排出的含氟废气对厂区周围水稻和蔬菜的污染及其与气象条件的关系，并提出了防止农业环境氟污染的措施。     

O／W型乳化液的处理

采用药剂破乳－电解破乳工艺处理Ｏ／Ｗ型乳化液，药剂破乳选用聚合硫酸铁为破乳剂，破乳时最佳ＰＨ为８，聚合硫酸铁的最佳投量为１５００ｍｇ／Ｌ，电解破乳选用铁作阳极，铝作阴极，电流密度０．８６Ａ／ｄｍ＾２，极距２５ｍｍ，电解时间３ｈ。在上述条件下，破乳效果良好，出水清澈透明，ＣＯＤ总去除率可达到９６－９７％。     

连续流改进A~2/O反应器去污效果及分相培养研究

以生活污水为原水,在常温(25~33℃)条件下采用连续流改进A2/O反应器进行脱氮除磷实验研究。系统内COD降解,TN与TP去除主要在活性污泥段完成,而NH4+-N去除基本在生物接触氧化区完成。从中沉池出水硝态氮影响因素分析可知,选用较高的有机负荷有利于实现系统内分相培养。泥龄对实现系统内微生物异养菌和自养菌的分相培养具有关键影响。当泥龄10 d,可实现系统内异养菌与自养菌的分相培养。     

Using multivariate regression modeling for sampling and predicting chemical characteristics of mixed waste in old landfills

Municipal solid waste landfills pose a threat on environment and human health, especially old landfills which lack facilities for collection and treatment of landfill gas and leachate. Consequently, missing information about emission flows prevent site-specific environmental risk assessments. To overcome this gap, the combination of waste sampling and analysis with statistical modeling is one option for estimating present and future emission potentials. Optimizing the tradeoff between investigation costs and reliable results requires knowledge about both: the number of samples to be taken and variables to be analyzed.This article aims to identify the optimized number of waste samples and variables in order to predict a larger set of variables. Therefore, we introduce a multivariate linear regression model and tested the applicability by usage of two case studies. Landfill A was used to set up and calibrate the model based on 50 waste samples and twelve variables. The calibrated model was applied to Landfill B including 36 waste samples and twelve variables with four predictor variables.The case study results are twofold: first, the reliable and accurate prediction of the twelve variables can be achieved with the knowledge of four predictor variables (Loi, EC, pH and Cl). For the second Landfill B, only ten full measurements would be needed for a reliable prediction of most response variables. The four predictor variables would exhibit comparably low analytical costs in comparison to the full set of measurements. This cost reduction could be used to increase the number of samples yielding an improved understanding of the spatial waste heterogeneity in landfills.Concluding, the future application of the developed model potentially improves the reliability of predicted emission potentials. The model could become a standard screening tool for old landfills if its applicability and reliability would be tested in additional case studies.     

Forensic Evaluation of Metals (Cr,Cu, Pb,Zn), Isotopes (δ13C and δ15N), and C:N Ratios in Freshwater Sediment

A forensic approach was used to evaluate sediments from Portão Stream, including analysis of metals, carbon (C) and nitrogen (N) stable isotopes, and C:N ratios. Samples collected at various points located along the stream were tested in order to investigate a possible illegal leachate input. The studied stream is heavily impacted by sewage and industrial discharges from two cities along its course. Among the metals analyzed, chromium (Cr) was noticeably the main pollutant, showing the highest levels, above regulatory limits, downstream from some potential sources of effluents enriched with this metal. Isotope analyses revealed a general trend of depletion in the heavier isotope along the stream for C and N. The exception was one point near a hazardous waste landfill, where relatively more enriched δ¹³C and δ¹⁵N values were found. The isotope and metal analysis results indicated that this site was affected by a particular source, demonstrating the combination of these parameters could be used for the discrimination of sources in a heavily polluted stream. Nevertheless, further investigations are necessary to provide a comprehensive evaluation of the biogeochemical processes involved in the incorporation of leachate in sediments to use this analysis as evidence for the illegal leachate discharge.