负载型纳米Fe-Pd降解水溶性偶氮染料

采用阳离子交换树脂表面为载体,合成了负载型纳米Fe-Pd二元复合金属材料,采用扫描电子显微镜(SEM)和能谱分析对该材料进行表征,研究了其对一些水溶性偶氮染料的降解效果.实验表明,该材料对0.05 g.L-1甲基橙、日落黄、酸性橙8、金橙G和活性红2等偶氮染料有较好的降解效果,纳米双金属中Pd含量的增加有利于染料的降解;反应体系初始pH值对染料的降解率影响较大,本研究中,pH 4酸性条件下降解效果最佳;制备的材料在第10次活化后,仍有较好的降解效果;为环境中偶氮染料的降解提供了一种有效的方法.     

醌介导染料脱色菌株的分离鉴定及特性

实验分离获得1株能够利用醌化合物使磺酸化偶氮染料脱色的菌株JL,通过形态特征、16S rDNA与16S-23S区间序列分析表明,该菌株为蜡状芽孢杆菌(命名为Bacillus cereus JL).菌株JL使酸性大红3R脱色的最佳条件为葡萄糖浓度1g/L, pH值为5~7,温度30℃,接种量0.25g/L.蒽醌-2-磺酸(AQS)、蒽醌-2,6-二磺酸(AQDS)和2-羟基-1,4-萘醌(Lawsone)均能显著提高酸性大红3R的脱色速率,其中AQS的促进作用最为明显.研究发现, 0.1mmol/L AQS能够使菌株JL对2.0mmol/L酸性大红3R保持较高的脱色速率,而且能使多种偶氮染料脱色,表现出较好的底物广谱性.利用高效液相色谱-质谱鉴定了AQS介导的酸性大红3R脱色产物,表明酸性大红3R的偶氮键发生断裂, AQS在这一过程中仅起到电子传递的作用.     

偶氮染料分子结构对其生物脱色影响的研究进展

偶氮染料是工业中染料用量最大的一类,不同的分子结构对其微生物脱色性能具有一定的影响作用。文章综述了偶氮染料分子结构中的取代基种类及其取代位置对染料的脱色规律,以及分子特征结构对微生物脱色的量化分析。对目前染料生物脱色规律研究中存在的问题进行了分析,提出相应的对策措施。     

不同环境条件下偶氮染料酸性大红GR的生物降解性能

为了考察不同环境条件下偶氮染料酸性大红GR生物降解性能,采用已驯化的混合菌群作为接种液进行偶氮染料酸性大红GR脱色试验。结果表明,微氧条件下(静置敞口培养),偶氮染料酸性大红GR脱色效果最佳,染料脱色主要发生在菌体的对数生长期。混合菌群对pH、温度适应范围较广,pH为3.32~9.18,温度在20℃~37℃范围内均可以获得较好脱色效果,脱色率均在80%以上。微氧条件下酸性大红GR降解历程表明,偶氮基整个共轭系统被破坏,生成了一种新的结构,使原有的某些精细结构在二阶导数光谱中得以表现,由此探讨其生物降解机理。     

Evaluating the effectiveness of marine actinobacterial extract and its mediated titanium dioxide nanoparticles in the degradation of azo dyes

Aim of the present study was to synthesize titanium dioxide nanoparticles （YiO2 NPs） from marine actinobacteria and to develop an eco-friendly azo-dye degradation method. A total of five actinobacterial isolates were isolated from Chennai marine sediments, Tamilnadu, India and analyzed for the synthesis of TiO2 NPs using titanium hydroxide. Among these, the isolate PSV 3 showed positive results for the synthesis of TiO2 NPs, which was confirmed by UV analysis. Further characterization of the synthesized TiO2 NPs was done using XRD, AFM and FI＇-IR analysis. Actinobacterial crude extract and synthesized TiO2 NPs was found efficient in degrading azo dye such as Acid Red 79 （AR-79） and Acid Red 80 （AR-80）. Degradation percentage was found to be 81% for AR-79, 83% for AR-80 using actinobacterial crude extract and 84% for AR-79, 85% for AR-80 using TiO2 NPs. Immobilized actinobacterial ceils showed 88% for AR-79 and 81% for AR- 80, dye degrading capacity. Degraded components were characterized by FT-IR and GC-MS analysis. The phytotoxicity test with 500 μg/mL of untreated dye showed remarkable phenotypic as well as cellular damage to Tagetes erecta plant. Comparatively no such damage was observed on plants by degraded dye components. In biotoxicity assay, treated dyes showed less toxic effect as compared to the untreated dyes.     

反硝化菌的偶氮染料脱色研究

从活性污泥中分离到几株反硝化能力的偶氮染料脱色菌。它们在合成培养基吧有使大多数所试偶氮染料脱色,而在反硝化条件下很难使偶氮染料脱色,只有菌株１７在培养２０ｄ后才有较好的脱色效果。酵母粉等有机物作为生长因子时,对菌株１７反硝化条件下的偶氮染料脱色有非常明显的促进作用;     

高盐条件下染料酸性橙7的生物降解特性

对偶氮染料废水厌氧-好氧生物处理中的高盐度抑制生物活性和芳香胺自氧化问题,通过多种强化策略,考察了NaCl为100g/L时酸性橙7(AO7)的生物降解特性.结果表明,加入葡萄糖(0.5g/L)、蛋白胨(1g/L)和酵母粉(0.5g/L)有利于高盐条件下AO7的生物降解.进水中加入酸性红B对AO7的脱色有加速作用.耐盐污泥中加入蒽醌形成的蒽醌-污泥自固定化体系可以促进AO7脱色,当蒽醌浓度为100mg/L时,AO7最大脱色率约为92%.以活性炭毡作为生物载体,厌氧和好氧体系均可实现稳定运行,且体系污泥沉降性良好,脱色速率达26.67mg/(L×h),且可有效抑制脱色中间产物1-氨基-2-萘酚的好氧自氧化,使COD去除率始终保持在90%以上.     

铁屑还原及微波铁屑诱导氧化降解偶氮染料历程的研究

研究了铁屑内电解还原及微波诱导氧化降解偶氮染料的反应历程,采用胶束毛细管电泳法对跟踪了2种不同降解方法下的中间产物变化.实验结果表明,染料的偶氮键(-N=N-)易被铁屑内电解还原,反应过程中有中间产物苯胺生成.微波诱导铁屑氧化偶氮染料的反应过程中未检测到其他芳环类化合物生成,在微波辐照2 min时脱色率已达90%以上,TOC去除率也高达78%,矿化较为彻底;在微波辐照铁屑诱导氧化降解污染物的同时,也使铁屑自身得以活化再生,提高了铁屑的内电解能力.     

切割钢渣活化过硫酸盐降解偶氮类染料酸性红73

切割钢渣是钢铁生产过程中的固体废弃物,如何有效处理和利用这些废渣具有减少环境污染、实现废物资源化的重要意义.本文选择河北邢台钢铁厂中切割钢渣为过硫酸盐(PS)活化剂,活化过硫酸盐(PS)去除水相中偶氮染料酸性红73(AR73),实验表明,25 mg·L~(-1) AR73在15 min内,其降解率为99.9%,TOC矿化率达58.6%.同时考察了钢渣投入量、PS浓度、初始pH值等影响因素对AR73降解效率的影响:随着PS浓度、钢渣投入量的增加,AR73的降解速率也逐渐增加;在pH为3～9时,AR73均可被有效去除,酸性条件更有利于AR73的去除.活性自由基猝灭实验表明,酸性红73的降解是通过自由基和非自由基两种机制实现的,且钢渣可多次回收重复利用.钢渣活化PS技术,还可有效去除蒽醌类染料(活性蓝19),其去除率为99.9%,矿化率可达92.0%;同时该技术对某印染废水(COD_(Cr)=5625 mg·L~(-1))的去除率达49.9%.本文所构建的切割钢渣活化过硫酸盐(PS)技术可应用于偶氮印染废水的处理,实现"以废治废"的目标.     

Degradation of direct azo dye by Cucurbita pepo free and immobilized peroxidase

Enzymatic decolourization of the azo dye, Direct Yellow (DY106) by Cucurbita pepo (courgette) peroxidase (CP) is a complex process, which is greatly affected by pH, temperature, enzyme activity and the concentrations of H₂O₂ and dye. Courgette peroxidase was extracted and its performance was evaluated by using the free-CP (FCP) and immobilized-CP (ICP) forms in the decolourization of DY106. Immobilization of peroxidase in calcium alginate beads was performed according to a strategy aiming to minimize enzyme leakage and keep its activity at a maximum value by optimizing sodium alginate content, enzyme loading and calcium chloride concentration. The initial conditions at which the highest DY106 decolourization yield was obtained were found at pH 2, temperature 20℃, H₂O₂ dose 1 mmol/L (FCP) and 100 mmol/L (ICP). The highest decolourization rates were obtained for dye concentrations 50 mg/L (FCP) and 80 mg/L (ICP). Under optimal conditions, the FCP was able to decolorize more than 87% of the dye within 2 min. While with ICP, the decolourization yield was 75% within 15 min. The decolourization and removal of DY106 was proved by UV-Vis analysis. Fourier transform infrared (FT-IR) spectroscopy analysis was also performed on DY106 and enzymatic treatment precipitated byproduct.