欧盟最佳可行技术（BAT）实施经验及其启示

为了全面提高环境技术管理水平,我国“十一五”启动了一批BAT指南编制试点工作。针对我国已经开展部分BAT工作存在调研工作量大、收集技术信息不全面、缺乏有效的创新技术推广机制、筛选BAT不能很好引导技术发展方向的问题,详细分析了欧盟BAT含义、BAT参考文件作用、BAT实施过程以及信息交流机制,总结了欧盟BAT在法律法规中的地位、技术信息来源的方式、技术筛选的方法以及对新技术的激励机制方面的实施经验,指出我国BAT体系建设亟待建立BAT推广应用的法律基础、技术信息交流平台、技术工作组和专家组以及促进新技术发展的验证评估机制,从而实现BAT对环境管理的技术支撑作用。     

陕北能源化工基地某工业园区水污染物排放总量控制研究

基于水污染物总量控制思路,以陕北能源化工基地某工业园区为研究对象,分析工业园区主要水环境问题及原因,分别对园区企业和集中污水处理厂提出排水水量、水质控制要求,从工程技术措施和管理手段上提出了明确的解决方案和要求。结果表明,各项减排措施实施后,COD、氨氮、石油类物质分别削减49.4%、71.0%、72.6%,园区排水总量控制在1.18万t/d,最终保证园区水污染物总量控制目标的实现。     

前置库技术在太湖流域面源污染控制中的应用探讨

根据前置库技术控制流域面源污染的基本原理以及在国内外的进展情况，分析了太湖流域利用前置库技术的可能性、可行性，研究提出了适合于太湖流域面源污染控制的强化净化前置库方案，为太湖地区及其他平原河网地区面源污染控制提供了一个可以考虑采用的方法。     

我国汽车排放控制现状和发展战略的探讨

本文探讨了我国汽车尾气催化净化技术研究的发展和现状。着重讨论了我国汽车尾气催化净化技术的水平以及新车和在用车使用净化器的跟踪评价及其问题,并对未来汽车尾气催化技术发展战略进行了探讨。     

沉积物中多环芳烃和有机氯农药定量分析的质量保证和质量控制

以美国ＥＰＡ为方法为基础,进行了沉积物中多环芳烃和有机氯农药分析的质量保证和质量控制实验,采用回收率指示物控制回收率,用内标法定量。结果表明多环芳烃的指示物回收率为５０．６７－９７．３３％,目标化合物的回收率为５８．６７－９６．３３％,方法检测限为３．３０－９．２６μｇ．ｋｇ＾－１。     

生物脱氮技术的研究进展

随着工农业生产的发展和人们生活水平的提高，含氮化合物的排放量急剧增加，业已成为环境的严重污染源而引起各界的关注。氮素污染的危害极大，进入水体，不但能诱发“富营养化”，造成水生生态系统紊乱，而且还有以下影响：（l）消耗溶解氧，导致水体缺氧；（2）影响鱼鳃的氧传递，使鱼类致死；（3）与氯气作用生成氯胺，妨碍氯化消毒。氨转化为硝酸，又可由饮用水而诱发婴儿的高铁血红蛋白症；硝酸盐进一步转化为亚硝胺则具有严重的“三致”作用，直接威胁着人类的健康’‘’。经济有效地控制氮素污染已成为当今环境工作者所面临的重大课…     

可交易水污染许可证发展现状与应用前景

可交易排污许可证在传统的排污许可证基础上，引入市场机制。不但对企业选择污染控制手段赋予更大的灵活性，而且可以大大节约水污染控制费用、剌激企业开发并建设更加经济有效的污染控制技术。国外十多年的研究和实践证明可交易排污许可证是一种经济而有效的环境管理手段。水污染排放许可证制度在我国的应用已有一定基础。在条件具备的地区可以引进可交易水污染物排放许可证制度，本文回顾了“可交易水污染许可证制度”的理论分析和国外实践，进而探讨在中国的应用前景     

Management of process performance at low water temperatures in respect of filamentous organisms

The management of sludge-settling properties in Nordic conditions is of importance during the low temperature (spring) season because of the peak settler load. A survey was made in 10 Finnish waste water treatment plants(WWTP‘ s) and the total extended filament length and DSVI in haft of the plants exceeded the limits, which indicates sludge bulking( 15 km/g SS and 150 ml/g respectively). The dominant organism was Microthrix parvicella, the abundance of which was 59.22% of total extended filament length on average.Chemicals were tested to control the filaments, and it was found that special attention has to be paid to maintaining the nitrification at low temperature. A dosage of(H2O2-besed) oxidants controlled the growth of Microthrix parvicella effectively and rapidly, whereas with the use of aluminium hydroxidechloride a 2 to 5-week period was needed to decrease the filament length.     

Take actions against Persistent Organic Pollutants （POPs）

China is facing a great challenge to implement the Stockholm Convention, the participants said at the Sino-US Workshop on Science-Based Decision Making-Implementing the Stockholm Convention on Persistent Organic Pollutants (POPs) in Beijing.     

Occurrence and volatility of several trace elements in pulverized coal boiler

The contents of eight trace elements(Mn, Cr, Pb, As, Se, Zn, Cd, Hg) in raw coal, bottom ash and fly ash were measured in a 220 t/h pulverized coal boiler. Factors affecting distribution of trace elements were investigated, including fly ash diameter, furnace temperature, oxygen content and trace elements‘ characters. One coefficient of Meij was also improved to more directly show element enrichment in combustion products. These elements may be classified into three groups according to their distribution: Group 1. Hg, which is very volatile. Group 2: Pb, Zn, Cd, which are partially volatile. Group 3: Mn, which is hardly volatile. Se may be located between groups 1 and 2. Cr has properties of both group ! and 3. In addition, the smaller diameter of fly ash, the more relative enrichment of trace elements (except Mn). The fly ash showed different adsorption mechanisms of trace elements and the volatilization of trace elements rises with furnace temperature. Relative enrichments of trace elements(except Mn and Cr) in fly ash are larger than that in bottom ash. Low oxygen content can not always improve the volatilization of trace elements. Pb is easier to form chloride than Cd during coal combustion. Trace elements should be classified in accordance with factors.