WC/TiO2纳米复合界面光催化剂制备及其光催化降解酚类污染物研究

设计并制备了新型WC/TiO2纳米复合界面光催化剂应用于酚类污染物的光催化降解反应中.采用X射线衍射(XRD)和扫描电子显微镜(SEM)技术分析了WC/TiO2纳米复合界面光催化剂的晶型和表面形貌.结果显示锐钛矿型TiO2纳米颗粒均匀地分散在WC纳米球表面并很好地构筑了WC/TiO2界面.研究了不同WC负载比例的WC/TiO2光催化剂在模拟太阳光照射下降解苯酚的光催化性能.结果表明:WC/TiO2复合界面的形成可以有效地提高TiO2光催化降解性能;其中,3%WC/TiO2(质量分数)光催化降解苯酚的活性最高.利用紫外-可见光谱(UV-Vis)和高效液相色谱-质谱联用技术(HPLC-MS)分析了WC/TiO2纳米复合界面光催化剂降解苯酚的中间产物,提出了苯酚在WC/TiO2界面上可能的降解机理.     

Photocatalytic removal of NO and NO2 using titania nanotubes synthesized by hydrothermal method

In this study, the photocatalysts of titania nanotubes(TNTs) were synthesized at different calcination temperatures using commercial Degussa TiO2(P25) as a precursor. The materials were then characterized by BET, SEM, TEM, and XRD analyses. The photocatalytic reactions with NO and NO2 under UV-A irradiation were both performed. The results showed that the photocatalytic reaction rate of NO was much faster than that of NO2, and the conversion of NO2 to nitrate was the rate-limiting step for photocatalytic removal of NOx if the nitrate produced cannot be removed continuously from the photocatalyst surface. For TNTs calcined at different temperatures, a significant enhancement was observed on the total NOx removal efficiency by TNT calcined at 500°C for both NO and NO2 photocatalytic reaction, which could be attributed to its high anatase crystallinity as well as high surface area. These two factors affect primarily on the NO2conversion step in which the high anatase crystallinity could be responsible for the high efficiency at the beginning, while the high surface area could be accounted for retaining this high efficiency from nitric acid poisoning during the test period.     

Biogenic C-doped titania templated by cyanobacteria for visible-light photocatalytic degradation of Rhodamine B

Cyanobacteria, which occurred in eutrophic water harvest solar light to carry out photosynthesis with high efficiency. In this work, cyanobacteria （Microcystis sp.） were used as biotemplate to synthesize titania structure. The synthesized titania sample had similar morphology to that of the original template in spite of the fragile unicellular structures and extremely high water content of cyanobacterial cells. Incorporation of biogenic C, as well as the morphology inherited from biotemplate improved visible- light absorbance of the titania structure. The sample exhibited higher visible-light photocatalytic activity than commercial titania photocatalyst Degussa P25 for Rhodamine B （RhB） degradation. Compared with those C-doped titania photocatalysts prepared by other methods, cyanobacteria templated titania photocatalyst offer some potential for competitive advantages. The reported strategy opened up a new use for the cyanobacteria. It could also be used for titania in applications such as treatment of polluted water, dye-sensitized solar cells, or other regions.     

Graphene-supported nanoscale zero-valent iron：Removal of phosphorus from aqueous solution and mechanistic study

Excess phosphorus from non-point pollution sources is one of the key factors causing eutrophication in many lakes in China,so finding a cost-effective method to remove phosphorus from non-point pollution sources is very important for the health of the aqueous environment. Graphene was selected to support nanoscale zero-valent iron(nZVI)for phosphorus removal from synthetic rainwater runoff in this article. Compared with nZVI supported on other porous materials,graphene-supported nZVI(G-nZVI) could remove phosphorus more efficiently. The amount of nZVI in G-nZVI was an important factor in the removal of phosphorus by G-nZVI,and G-nZVI with 20 wt.% nZVI(20% G-nZVI)could remove phosphorus most efficiently. The nZVI was very stable and could disperse very well on graphene,as characterized by transmission electron microscopy(TEM) and scanning electron microscopy(SEM). X-ray photoelectron spectroscopy(XPS),Fourier Transform infrared spectroscopy(FT-IR) and Raman spectroscopy were used to elucidate the reaction process,and the results indicated that Fe-O-P was formed after phosphorus was adsorbed by G-nZVI. The results obtained from X-ray diffraction(XRD) indicated that the reaction product between nZVI supported on graphene and phosphorus was Fe3(PO4)2·8H2O(Vivianite). It was confirmed that the specific reaction mechanism for the removal of phosphorus with nZVI or G-nZVI was mainly due to chemical reaction between nZVI and phosphorus.     

Combination of heterogeneous Fenton-like reaction and photocatalysis using Co-TiO2 nanocatalyst for activation of KHSO5 with visible light irradiation at ambient conditions

A novel coupled system using Co–Ti O2 was successfully designed which combined two different heterogeneous advanced oxidation processes, sulfate radical based Fenton-like reaction（SR-Fenton） and visible light photocatalysis（Vis-Photo）, for degradation of organic contaminants. The synergistic effect of SR-Fenton and Vis-Photo was observed through comparative tests of 50 mg/L Rhodamine B（Rh B） degradation and TOC removal. The Rhodamine B degradation rate and TOC removal were 100% and 68.1% using the SR-Fenton/Vis-Photo combined process under ambient conditions, respectively. Moreover, based on XRD, XPS and UV-DRS characterization, it can be deduced that tricobalt tetroxide located on the surface of the catalyst is the SR-Fenton active site, and cobalt ion implanted in the Ti O2 lattice is the reason for the visible light photocatalytic activity of Co–Ti O2. Finally, the effects of the calcination temperature and cobalt concentration on the synergistic performance were also investigated and a possible mechanism for the synergistic system was proposed. This coupled system exhibited excellent catalytic stability and reusability,and almost no dissolution of Co2＋was found.     

臭氧/纳米TiO2催化氧化去除水中微量硝基苯的研究

在悬浮颗粒搅拌混合反应器中,研究了臭氧/纳米TiO₂催化氧化去除水中微量硝基苯的性能,结果表明,纳米TiO₂催化臭氧化去除硝基苯较单独臭氧氧化有明显的提高,反应20min硝基苯的去除率提高了44%.实验中分别考察了纳米TiO₂热处理温度、催化剂投量、臭氧投量、硝基苯初始浓度、pH值对臭氧/纳米TiO₂催化氧化去除硝基苯的影响.发现550℃烧结得到的纳米TiO₂表现出最好的催化臭氧化活性,在较低的臭氧投量与催化剂用量条件下,硝基苯的去除率可达到56.57%;增大臭氧或者硝基苯的初始浓度,硝基苯的去除率随之提高;但是改变催化剂投量,硝基苯的去除效果几乎不受影响;中性或碱性pH环境利于纳米TiO₂催化臭氧化反应的进行.通过研究叔丁醇对纳米TiO₂催化臭氧化反应的影响,证明反应遵循羟基自由基(·OH)反应机理.     

3,5-二硝基水杨酸表面修饰纳米Ti2吸附对硝基苯酚

化学吸附法合成3,5-二硝基水杨酸表面修饰的TiO₂纳米粒子,TiO₂表面修饰后呈浅黄色,TiO₂表面羟基与3,5-二硝基水杨酸发生类似于醇和酸间的酯化反应.表层链接有苯环,极性减弱,非极性增强,在水、苯、乙醇中均分散性良好,与芳香族污染物的亲合力增强,有利于吸附去除芳香族污染物.表面修饰的TiO₂纳米粒子20mg,在最佳吸附pH值3、吸附时间10min,对100mL对硝基苯酚(3～10 mg/L)的吸附率可由改性前的43%增至99.9%.该法吸附效率高,可直接达到一级排放标准,提供了深度处理对硝基苯酚废水的新方法.     

微纳米气液分散体系吸收NO

以模拟烟气为气源,去离子水为水源,通过微纳米气泡发生器形成微纳米气液分散体系,吸收模拟烟气中的NO,考察了多种因素对脱硝率(η)和气相体积总传质系数(KGa)的影响,分析了微纳米气液分散体系吸收NO的反应机理。结果表明:η和KGa随着进气NO体积分数和十二烷基苯磺酸钠(SDBS)质量浓度的提高而下降;随着吸收液初始pH的提高先降低后升高;随着进气O_2体积分数的增大而提高;随着吸收液温度的升高先提高后降低;控制进气NO体积分数为0.06%时,在吸收液初始pH为2.0、吸收剂为去离子水、吸收液温度为25℃、进气O_2体积分数为10%的最佳条件下,脱硝率可达81.0%。微纳米气液分散体系是通过产生羟基自由基从而对NO进行氧化吸收的。     

基于CFD的超薄平板膜MBR流态模拟及优化分析

随着MBR的广泛应用,为控制膜污染导致高运行成本问题,优化新型平板膜MBR的曝气条件成为目前的一个研究热点.本研究通过使用CFD Fluent软件,结合多相流模型和湍流模型进行超薄平板膜MBR的高质量流态模拟,量化膜面剪切力,并从流场及膜污染角度分别对3种气水比(10∶1、15∶1和20∶1)工况下的MBR进行了优化分...     

基于LW51铅锌捕获剂在矿产节能中的优化分析

本文对难选氧化铅锌矿进行了实验研究,详细介绍了氧化铅锌矿浮选工艺、矿石的工艺矿物学以及新型捕收剂LW51在难选氧化铅锌矿开发中的应用。