半焦脱硫剂脱除烟气中的SO2

烟气脱硫作为净化大气、遏制酸雨的技术,在过去几十年中得到了迅速发展,并且在工业应用上取得了巨大成功,炭法烟气脱硫技术已经在国外得到商业化应用,能够100%脱除烟气中的SO2.国内、外在炭法烟气脱硫的工艺研究和机理探讨方面都做了大量的工作,如以多孔炭为物理吸附剂,通过变温吸附来获得纯SO2;以多孔炭作为催化剂,将SO2催化氧化变为硫酸.     

农业非点源污染田间模型及其应用

非点源污染的负荷定量化研究是控制、评价和管理非点源污染的基础.农业非点源污染负荷估算包括农田排水估算和排水中的污染物浓度预测2个环节.依据水量平衡原理,农田排水应用DRAINMOD模型估算;将农田的施肥和灌溉过程合成作为田间污染物浓度的脉冲输入,农田排水中的污染物浓度变化则视作对应于此脉冲输入的响应过程,而污染物在田间的复杂迁移转化过程以逆高斯概率密度函数隐含表达.以此为基础,构建了农田尺度农业非点源污染负荷估算模型.以青铜峡灌区典型试验区为例,对稻田排水沟中硝态氮(NO_3~--N)和总磷(TP)的负荷过程进行了模拟,结果表明,模型估算结果和实测污染物负荷过程非常接近,Nash-Suttcliffe模拟效率系数分别为0.963和0.945,表明该模型具有较高的可靠性.     

Acid deposition critical loads modeling for the simulation of sulfur exceedanceand reduction in Guangdong, China

The current acid deposition critical loads in Guangdong, China were calculated using the PROFILE model with a 3 km × 3 km resolution. Calculations were carried out for critical loads of potential acidity, actual acidity, sulfur and nitrogen, with values in extents of 0–3.5, 0–14.0, 0–26.0 and 0–3.5 kmol/(hm2·year), respectively. These values were comparable to previously reported results and reflected the influences of vegetation and soil characteristics on the soil acid buffering capacity. Simulations of S...     

Using the nematode Caenorhabditis elegans as a model animal for assessing thetoxicity induced by microcystin-LR

Among more than 75 variants of microcystin(MC),microcystin-LR(MC-LR) is one of the most common toxins.In this study,the feasibility of using Caenorhabditis elegans to evaluate MC-LR toxicity was studied.C.elegans was treated with MC-LR at different concentrations ranging from 0.1 to 80 μg/L.The results showed that MC-LR could reduce lifespan,delay development,lengthen generation time,decrease brood size,suppress locomotion behavior,and decreases hsp-16-2-gfp expression.The endpoints of generation time,brood...     

生物渗滤池运行参数优化研究

实验针对间歇投配污水的生物渗滤池处理生活废水的一些基本运行参数进行了优化研究。通过对生物渗滤池的出水量、不同填料性质、不同填料粒径以及不同进水水质与污染物(COD)去除率影响的研究,证实该系统的水力负荷与污染物去除率成反向关系,即当水力负荷减少时,污染物去除率会相对增加;研究还表明选用粒径为0.9～2mm自然河沙作为系统填料时,系统COD去除率较高,这时填料不易被堵塞且即使堵塞也较易恢复;运用生物渗滤池处理城市生活污水能使处理后污水COD达到城镇污水处理厂出水排放标准的一级标准。提高污水中营养物质的配比以及采用多级生物渗滤池联用,能高效处理高浓度污水,甚至使出水达标排放。     

Characterization of organic matter in total suspended particles bythermodesorption and pyrolysis-gas chromatography-mass spectrometry

The organic matter in tropospheric aerosol plays an important role in atmospheric physical and chemical processes. The bulk oforganic matter, representing a significant proportion of the total suspended particulate (TSP) mass, is bound to polymeric materialwhose structure and properties are largely unknown. Here we used thermodesorption gas chromatography/mass spectrometry (Td-GC/MS) to study organic compounds of low molecular mass and pyrolysis gas chromatography/mass spectrometry (Py-GC/MS) tocharacterize the chemical structure of macromolecules in TSP samples collected in di erent seasons from di erent sites in Guangzhou.n-Alkanes, fatty acids and nitriles were the predominant compounds in the thermodesorption products, whereas aromatics, fatty acids,nitriles and n-alkanes/alkenes were the major compounds in the pyrolysates. The results indicated that aromatics were main units inmacromolecules. The fatty acids and nitriles formed from carboxylic ammonium salts were detected in both thermodesorption productsand pyrolysates at a certain concentration, indicating the importance of these compounds in TSP formation. The TSP source mainlydetermined the occurrence of compounds in samples from urban, suburban and forest sites, whereas the TSP source and formationprocess maybe controlled the seasonal variation in compounds detected. High levels of nitriles in summer samples from suburban andforest sites coincide with the release of ammonium from the land and of fatty acids from vegetation at these sites.     

污染物负荷对曝气生物滤池处理效果的影响研究

考察了进水有机负荷和氨氮负荷对曝气生物滤池出水水质的影响.结果表明,系统COD、氨氮和TN的去除率随进水有机负荷的增加而下降,在氨氮为28.3～33.6 mg/L、TN为39.0～45.8 mg/L条件下,有机负荷小于3.53 kg/(ms3·d)时,出水COD、氨氮和TN分别小于50、5、15 mg/L,去除率分别在85%、85%和65%以上;氨氮和TN的去除率随氨氮负荷的增加而下降,在COD为287.6～313.4 mg/L、氨氮负荷小于0.56 kg/(m3·d)时,出水氨氮小于8 mg/L,去除率在85%以上,出水TN小于15mg/L,去除率在65%以上.     

季铵盐离子液体改性活性炭及其热安全性研究*

为进一步提高活性炭对VOCs的吸附性能和热安全性,采用铵盐类离子液体改性原始活性炭,优化其理化性质。结果表明:改性活性炭表面生成新的无机盐化合物,C=O、-OH、C-O、-COOH和C-S基团增加;孔隙结构增多且分布均匀,比表面积及微孔体积增大;改性后活性炭对甲苯的吸附量提高3.14倍,吸附效率明显提升;在固定碳的燃烧阶段,改性活性炭活化能为54.44 kJ·mol-1,是改性前活性炭的1.38倍,活化能增大,物质稳定性增强;当粒径为120~150目及200目以上时,改性前后活性炭的自燃温度分别从328.4 ℃、319.3 ℃增长至355.1 ℃、345.7 ℃。因此,负载季铵盐离子液体可有效提高活性炭吸附性能和热安全性,研究结果可为优化VOCs处理工艺提供参考。     

基于平面压入技术研究焊接接头单轴应力-应变关系

目的 获取异种金属焊接接头母材和热影响区局部拉伸应力-应变关系。方法 对压水堆机组蒸汽发生器接管安全端异种金属焊接接头(20MND 5-INCONEL 52-Z2 CND 18.12控氮)进行研究,通过金相检验和显微硬度测试,研究DMWJ母材、热影响区、焊缝熔合线位置的金相组织和维氏硬度分布。采用等直圆棒拉伸试验获得DMWJ低合金钢(20MND 5)母材的应力-应变关系,采用基于能量等效理论的平面压入技术获得DMWJ低合金钢母材、热影响区和焊缝局部材料应力-应变关系。结果 DMWJ材料组织、力学性能不均匀,等直圆棒拉伸试验得到的低合金钢母材拉伸应力-应变关系与平面压入技术测得结果较为吻合。结论 基于能量等效理论的平面压入技术可精确测得DMWJ低合金钢母材、热影响区和焊缝局部材料应力-应变关系,对压水堆核电站DMWJ在役检测及结构完整性评价具有重要意义。