Expression of sulfur uptake assimilation-related genes in response to cadmium, bensulfuron-methyl and their co-contamination in rice roots

The responses of sulfur （S） uptake assimilation-related genes＇ expression in roots of two rice cultivars to cadmium （Cd）, bensulfuron-methyl （BSM） and their co-contamination （Cd＋BSM） were investigated by gene-chip microarray analysis and quantitative real-time PCR （QRT-PCR） technology. Treatments of Cd and Cd＋BSM induced expression of sulfate transporter and permease genes, and promoted sulfate uptake in rice roots. Cd＋BSM could alleviate Cd toxicity to cv. Fengmeizhan seedlings, probably due to Cd＋BSM promoting greater S absorption by seedlings. Cd and Cd＋BSM induced expression of sulfate assimilation-related genes, and thus activated the sulfur assimilation pathway. Cd and Cd＋BSM induced expression of phytochelatin synthase and metallothionein genes, and induced expression of glutathione S-transferases （GSTs）, glutathione synthase （GS） and S- containing antioxidation enzyme genes, which detoxified Cd2＋. It is suggested that （to cope with the toxicity of Cd, BSM and their co-contamination） the S uptake and assimilation pathway was activated in rice roots by increased expression of related genes, thus enhancing the supply of organic S for synthesis of Cd or BSM resistance-related substances.     

Efficient dechlorination of chlorinated solvent pollutants under UV irradiation by using the synthesized TiO2 nano-sheets in aqueous phase

Titanium dioxide(TiO2), which is the widely used photo-catalyst, has been synthesized by simple hydrothermal solution containing tetrabutyl titanate and hydrofluoric acid. The synthesized product has been applied to photo-degradation in aqueous phase of chlorinated solvents, namely tetrachloroethene(PCE), trichloroethene(TCE) and 1,1,1-trichloroethane(TCA). The photo-degradation results revealed that the degradation of these harmful chemicals was better in UV/synthesized TiO2 system compared to UV/commercial P25 system and UV only system. The photo-catalytic efficiency of the synthesized TiO2 was 1.4, 1.8 and 3.0 folds higher compared to the commercial P25 for TCA, TCE and PCE degradation, respectively. Moreover, using nitrobenzene(NB) as a probe of hydroxyl radical(.OH), the degradation rate was better over UV/synthesized TiO2, suggesting the high concentration of.OH generated in UV/synthesized TiO2system. In addition,.OH concentration was confirmed by the strong peak displayed in EPR analysis over UV/synthesized TiO2system. The characterization result using XRD and TEM showed that the synthesized TiO2 was in anatase form and consisted of well-defined sheet-shaped structures having a rectangular outline with a thickness of 4 nm, side length of 50 nm and width of 33 nm and a surface 90.3 m2/g. XPS analysis revealed that ≡Ti-F bond was formed on the surface of the synthesized TiO2. The above results on both photocatalytic activity and the surface analysis demonstrated the good applicability of the synthesized TiO2 nano-sheets for the remediation of chlorinated solvent contaminated groundwater.     

Arsenic removal from groundwater by acclimated sludge under autohydrogenotrophic conditions

Arsenic in the environment is attracting increasing attention due to its chronic health effects. Although arsenite(As(III)) is generally more mobile and more toxic than arsenate(As(V)), reducing As(V) to As(III) may still be a means for decontamination, because As(III) can be removed from solution by precipitation with sulfide or by adsorption or complexation with other metal sulfides. The performance of As(V) bio-reduction under autohydrogenotrophic conditions was investigated with batch experiments. The results showed that As(V) reduction was a biochemical process while both acclimated sludge and hydrogen were essential. Most of the reduced arsenic remained in a soluble form, although 20% was removed with no addition of sulfate, while 82% was removed when sulfate was reduced to sulfide. The results demonstrated that the reduced arsenic was re-sequestered in the precipitates, probably as arsenic sulfides. Kinetic analysis showed that pseudo first-order kinetics described the bio-reduction process better than pseudo second-order. In particular, the influences of pH and temperature on As(V) reduction by acclimated sludge under autohydrogenotrophic conditions and total soluble As removal were examined. The reduction process was highly sensitive to both pH and temperature, with the optimum ranges of pH 6.5–7.0 and 30–40°C respectively. Furthermore, Arrhenius modeling results for the temperature effect indicated that the As(V) reduction trend was systematic. Total soluble As removal was consistent with the trend of As(V) reduction.     

重庆市主城区大气细颗粒物污染特征与来源解析

重庆市主城区大气细颗粒物(PM_(2.5))浓度从1990s的100μg·m~(-3)下降至当前的约70μg·m~(-3),但仍高于环境标准限值.为探讨重庆市主城区PM_(2.5)化学组成与来源特征,于2012—2013年在渝北区大气超级站利用四通道采样仪连续采集了颗粒物样品,分析了其中水溶性离子、碳质组分和无机元素含量.采样期间,重庆市主城区大气PM_(10)和PM_(2.5)的年日均浓度分别为103.9和75.3μg·m~(-3),扩散条件不利的冬季,细颗粒物污染较为严重.受静稳天气影响的1月和2月,受沙尘影响的3月,及二次转化显著的6月是重庆市细颗粒物污染较重的月份.重庆市PM_(2.5)组成以有机物(OM,30.8%)为主,其次为硫酸盐(SO_4~(2-),23.0%)、硝酸盐(NO_3~-,11.7%)、铵盐(NH_4~+,10.9%)、地壳物质(Soil,8.2%)、元素碳(EC,5.2%)、K~+(1.1%)、Cl~-(1.0%)和微量元素(Trace,0.6%).较高的SO_4~(2-)浓度和逐步上升的[NO_3~-]/[SO_4~(2-)]比值反映了重庆市燃煤污染较重,同时机动车污染比例逐步增加.采用主因子分析/绝对主因子得分法解析了重庆城区细颗粒物5类主要来源是:二次粒子(41.7%)、燃煤(15.6%)、建筑/道路尘(12.4%)、土壤尘(11.0%)和工业尘(10.4%),通过各污染源季节变化及与其他结果对比,该源解析结果能够较可靠反映重庆市细颗粒物的来源信息.     

凹凸棒石的表面修饰及对水中Cr（Ⅵ）吸附动力学和热力学的研究

以壳聚糖为生物质碳源,采用一步水热碳化法对凹凸棒石表面进行有机修饰,并采用扫描电镜(SEM)、拉曼(Raman)光谱、元素分析(EA)、X光电子能谱(XPS)、Zeta电势分析、热重分析(TGA)等对改性凹凸棒石进行表征分析.同时,通过静态吸附实验,研究了改性凹凸棒石对Cr(Ⅵ)吸附去除的性能,考察了温度对吸附性能的影响,探讨了吸附动力学和热力学规律.结果表明,改性凹凸棒石表面富含含氧基团和氨基等活性基团;对总铬的吸附行为符合准二级动力学方程;表观吸附活化能为13.4 k J·mol~(-1),表明既有静电吸附,也有配位吸附,且以静电吸附为主;对总铬的吸附等温线符合Langmuir方程.在温度为298、308、318和328 K时,最大吸附量分别为203.3、232.6、267.4和322.6 mg·g~(-1),说明改性凹凸棒石是一种新型环保高性能的除铬材料.在研究的温度范围内,ΔH~0为19.8 k J·mol~(-1),ΔG~0为-19.5~-23.7 k J·mol~(-1),ΔS~0为72.1~131.8 J·mol~(-1)·K~(-1),表明该吸附是一吸热的、自发的、熵增过程.     

UV降解氟喹诺酮类抗生素的动力学及毒性分析

紫外线(UV)光降解在UV消毒及基于UV的高级氧化技术中,对污染物的降解起重要作用。试验选定了环丙沙星、氧氟沙星、恩诺沙星、洛美沙星、诺氟沙星5种氟喹诺酮类抗生素(FQs),探究了UV降解5种选定FQs的基础动力学参数及其降解过程中的毒性变化。结果表明,所选FQs的直接光降解均符合伪一级动力学,溶液pH的变化会引起FQs的解离,FQs各解离态摩尔吸光系数值的范围为 0.24×10³～19.02×10³L/(mol·cm),光降解速率常数值的范围为 0.02×10^-3～0.41×10^-3cm²/mJ,光量子产率的范围为 0.35×10^-2～75.91×10^-2,不同解离态的光降解动力学参数大小关系均为分子态>阴离子态>阳离子态。4种常见无机阴离子(氯离子、硫酸根、硝酸根、碳酸氢根)对选定 FQs 的降解具有不同程度的促进或抑制作用。温度的升高对降解具有微弱的促进作用,目标 FQs 的表观活化能范围为13.26～23.14 k...     

网络版摘要

微波作用下H2O2／分子筛协同处理孔雀石绿废水;以工业废弃磷石膏为原料制备碳酸钙晶须的研究;温度对SBR法生物除磷的影响;紫外光降解水溶液中邻硝基苯酚的研究;胶州湾东岸典型入海河流综合污染权重研究……     

真空紫外光降解苯的研究

为了考察真空紫外光辐射在气体净化中的应用,以苯作为目标污染物,分别进行了紫外光波长、气体湿度、反应时间、初始浓度以及辐射功率对苯光解率的影响实验。实验结果表明,真空紫外光辐射方法净化气相污染物中的苯效果良好,在一定条件下,浓度为348.2 mg/m³苯污染气体真空紫外光降解率可达到90%。通过在不同条件下苯的降解率以及臭氧浓度变化,初步探讨了苯降解的机理以及降解途径。苯的降解主要是通过氢氧自由基（·OH）的加成以及后续一系列的氧化反应,降解产物为苯酚以及含有羟基的长链烃。     

石墨相氮化碳协同UV-H_2O_2光催化降解亚甲基蓝

以三聚氰胺为前驱体,经热解—回流法制备了石墨相氮化碳(g-C3N4),采用XRD、FTIR、SEM、EDS、PL等技术对g-C_3N_4进行了表征。研究了g-C_3N_4在UV-H_2O_2体系中对废水中亚甲基蓝(MB)的光降解效果。实验结果表明,UV+g-C_3N_4催化剂+H_2O_2体系能协同降解MB,在初始MB质量浓度为20 mg/L、初始废水p H为5、废水体积为250 mL、g-C_3N_4加入量为0.10 g、H_2O_2浓度为0.4 mmol/L、反应温度为25℃的优化工艺条件下,紫外光照射70 min时MB脱色率达98.32%。g-C_3N_4催化剂具有较好的重复使用性能,使用5次后MB脱色率仍保持在95.10%。     

4-硝基苯胺与人血清白蛋白相互作用的研究

通过荧光和紫外光谱法研究了4-硝基苯胺与人血清白蛋白（HSA）的作用.结果表明,4-硝基苯胺对HSA的内源荧光具有强烈的猝灭作用.猝灭机理为静态猝灭,同时伴随有非辐射能量转移的发生.根据双对数方程计算其结合常数和结合位点数.确定4-硝基苯胺与HSA有一类结合部位.根据热力学参数得出4-硝基苯胺与HSA之间的主要作用力为氢键和疏水作用力.同步荧光的结果表明,作用点位靠近色氨酸,并且使色氨酸的疏水环境增强.