无缝钢管局部径向模具塑性成形过程的三维有限元数值模拟

采用大变形弹塑性有限元理论,用DYNA3D(研究版)有限元软件,对无缝钢管局部径向模具塑性成形过程中当凸模的凹槽尺寸与凸模的圆弧半径发生变化时进行了数值模拟研究,得出了对成形钢管表面质量控制具有重要参考价值的结论,解决了成形钢管表面的压痕问题。     

Effects of bifenthrin on Daphnia magna during chronic toxicity test and the recovery test

IntroductionWiththedevelopmentandapplicationofnewpesticide ,insecticidehasgreatlyreducedtheharmofpesttocrops .Bifenthrinisaneffectivepyrethroidinsecticideandacaricideagainstawiderangeofinsectpests ,anditisverypoisonoustomammal,aquatic .Thisinsecticideiswi…     

以工业废物制备高效氧化铁系脱硫剂的研究

研究了以硫酸烧渣、转炉赤泥、平炉尘为主要原料制备氧化铁系 (SW型 )脱硫剂的方法及制备工艺。结果表明 :脱硫剂最佳配方为粘结剂 5 %～ 8% ,制孔剂 0 0 8%～ 0 1% ,木屑 8%～ 12 % ,工业废渣 (硫酸烧渣、转炉赤泥、平炉尘等 ) 78%～ 88% ;成型的最佳温度为 15 0℃ ,活化方法应根据主要原料的不同有所差异 ,活化条件以成型活化优于成型前活化     

凤眼莲根系分泌物对栅藻结构及代谢的影响

研究了凤眼莲（Ｅｉｃｈｈｏｒｎｉａ ｃｒａｓｓｉｐｅｓ）根系分泌物对栅藻（Ｓｃｅｎｅｄｅｓｍｕｓ ａｒｃｕａｔｕｓ Ｌｅｍｍ）超微结构及生长代谢的影响，结果显示，凤眼莲对栅藻有明显的克生作用，藻的数量逐步减少，栅藻生长受影响后，细胞中绿体片层肿用甚至解体，线粒体嵴消失，质膜、核膜受破坏，光合放氧化速度明显下降，可溶性蛋白折含量四天后４线下降，超氧阴离子（Ｏ２－）、丙二醛（ＭＤＡ）的含量上升，知值都     

一株苯酚降解菌的分离和鉴定

:从工业废水中分离到一株高效降解苯酚的菌株PHEA 2 ,它能够在以苯酚为单一碳源和能源的无机培养基上生长 ,其最高苯酚降解率为 394nmol/ (mg·min) .经Biolog细菌自动鉴定仪鉴定 ,该菌株为醋酸钙不动杆菌 (Acinetobactercalcoaceti cus) .采用PCR扩增获得的该菌 16SrDNA片段 ,核苷酸序列分析结果表明 ,该菌株的 16SrDNA的核苷酸序列与醋酸钙不动杆菌同源性为 98% .在细菌系统发育分类学上 ,PHEA 2归属变形细菌γ亚类、不动杆菌属、醋酸钙不动杆菌 .     

三维叠前时间偏移技术在江苏WZD地区的应用

当地下地质构造复杂、断裂发育,横向速度变化不是太剧烈的情况下,提高偏移成像精度,三维叠前时间偏移是一种行之有效的方法。三维叠前时间偏移取得成功的关键:一是高保真、高信噪比的叠前数据;二是建立一个合理的三维偏移速度场。随着计算机性能的不断提高,三维叠前时间偏移逐渐成为常规处理技术,该技术在江苏油田WZD地区得到了广泛的应用,实际资料处理结果及钻探效果证实了三维叠前时间偏移技术是解决WZD地区复杂构造成像精度的一种好方法。     

加速我国环保产业的发展

简述了环保产业是未来世纪产业，介绍了国内外环保产业的现状及我国环保产业存在的问题，对发展我国环保产业提出了对策和建议。     

饮用水中氯化产物水合氯醛、三氯乙酸的活性炭富集顶空分析法研究

以活性炭为富集材料,经酸化和甲酯衍生化后,饮用水中非挥发性的水合氯醛和三氯乙酸可以从活性炭的吸附态定量地释出气体,利用顶空法取样,GC/ECD进行测定。对不同水样检测结果表明,饮用水中水合氯醛、三氯乙酸来自氯化消毒过程。控制水源有机质污染,装置活性炭过滤器,延长烧水煮沸时间,可有效地减少人体对其摄入量。     

Adsorption performance of CMK-3 and C-FDU-15 in NO removal at low temperature

CMK-3 and C-FDU-15 samples were synthesized using hard-templating and evaporationinduced self-assembly(EISA) methods,respectively.The pore structures of CMK-3 and CFDU-15 as well as commercial activated carbon were characterized by means of X-ray diffraction,field emission scanning electron microscopy,transmission electron microscopy,and N_2 adsorption–desorption.Adsorption of NO was investigated by means of thermogravimetric analysis,temperature-programmed desorption of NO + O_2,and in situ diffuse reflectance Fourier transform infrared spectroscopy.The results show that the CMK-3 and C-FDU-15 materials possessed ordered and uniform structures.The coadsorption capacity of NO and O_2 decreased in the sequence CMK-3(88.6 mg/g) C-FDU-15(71.7 mg/g) AC(25.3 mg/g).There were two main adsorption species on CMK-3 and CFDU-15:nitrite and nitrate.Nitrite is converted to nitrate easily.However,the adsorption species were more complex on AC,with nitrite being the main species.Moreover,CMK-3 and C-FDU-15 exhibit excellent regeneration efficiency compared with AC.The excellent NO adsorption performance of CMK-3 and C-FDU-15 was associated with their ordered mesoporous structures and high surface areas.The research provides more options for NO adsorption in the future.     

Component regulation in novel La-Co-O-C composite catalyst for boosted redox reactions and enhanced thermal stability in methane combustion

A novel La-Co-O-C (LC-C) composites were prepared via a facile co-hydrothermal route with oxides and glycerol and further optimized for methane catalytic activity and thermal stability via component regulation. It was demonstrated that Co₃O₄ phase was the main component in regulation. The combined results of X-ray photoelectron spectroscopy (XPS), temperature-programmed desorption of oxygen (O₂-TPD), temperature-programmed reduction of hydrogen (H₂-TPR), temperature-programmed desorption of ammonia/carbon dioxide (NH₃/CO₂-TPD) revealed that component regulation led to more oxygen vacancies and exposure of surface Co²⁺, lower surface basicity and optimized acidity, which were beneficial for adsorption of active oxygen species and activation of methane molecules, resulting in the excellent catalytic oxidation performance. Especially, the (3.5)LC-C (3.5 is Co-to-La molar ratio) showed the optimum activity and the T₅₀ and T₉₀ (the temperature at which the CH₄ conversion rate was 50% and 90%, respectively) were 318 and 367°C, respectively. Using theoretical calculations and in situ diffuse reflection infrared Fourier transform spectroscopy characterization, it was also found that the catalytic mechanism changes from the “Rideal-Eley” mechanism to the “Two-term” mechanism depending on the temperature windows in which the reaction takes place. Besides, the use of the “Flynn-Wall-Ozawa” model in thermoanalytical kinetics revealed that component regulation simultaneously optimized the decomposition activation energy, further expanding the application scope of carbon-containing composites.