Floatability of polymer materials modulated by frothers

Flotation tests of 35 polymer materials were carried out to investigate their floatability modulated by frothers. Results of flotation tests demonstrated that polymer resins and soft PVC showed high floatability, floatability of hard PVC plastics was relatively low and was related to the frothers, and there exists significant difference in the floatability of different post-consumer plastics. Flotation rate of post-consumer plastics varies from 0% to 100%. Furthermore, three-category low-energy surface (LES) was defined based on the hydrophile index of the materials involved in this paper, and an adsorption model was proposed to explain the results of flotation and to discuss the floatability of polymer materials modulated by frothers. Frother molecules are prone to adsorb on the surface of bubble rather than LES at relatively low concentration, bubble adsorbed by frother molecules is prone to approach first-category LES rather than third-category LES, and the structure of liquid film is formed on the first-category LES at large concentration. Floatability of polymer materials modulated by frothers is further discussed: frothers increase the floatability of the first-category LES but decrease the floatability of the third-category LES, while the floatability of the second-category LES is related to the type of frothers.     

Study of Ni adsorption on NKF-6 zeolite

The adsorption of ⁶³Ni from aqueous solutions using NKF-6 zeolite was investigated by a batch technique under ambient conditions. The adsorption was investigated as a function of contact time, pH, ionic strength, foreign ions, humic substances (FA/HA) and temperature. The kinetic adsorption was well described by the pseudo-second-order rate equation. The adsorption of ⁶³Ni on NKF-6 zeolite was strongly dependent on pH and ionic strength, and the adsorption of ⁶³Ni increased with increasing NKF-6 zeolite content. At low pH values, the presence of FA enhanced the adsorption of ⁶³Ni on NKF-6 zeolite, but the presence of HA had no drastic effect. At high pH values, the presence of FA or HA decreased the adsorption of ⁶³Ni on NKF-6 zeolite. The adsorption isotherms were well represented by the Langmuir model. The thermodynamic parameters (i.e., ΔH⁰, ΔS⁰and ΔG⁰) for the adsorption of ⁶³Ni were determined from the temperature dependent isotherms at 293.15, 313.15 and 333.15 °K, respectively, and the results indicate that the adsorption reaction was favored at high temperature. The results suggest that the adsorption process of ⁶³Ni on NKF-6 zeolite is spontaneous and endothermic.     

Adsorption and desorption variability of four herbicides used in paddy rice production

This investigation was performed to determine the effect of physicochemical soil properties on penoxsulam, molinate, bentazon, and MCPA adsorption–desorption processes. Four soils from Melozal (35° 43′ S; 71° 41′ W), Parral (36° 08′ S; 71° 52′ W), San Carlos (36° 24′ S; 71° 57′ W), and Panimavida (35° 44′ S; 71° 24′ W) were utilized. Herbicide adsorption reached equilibrium after 4 h in all soils. The Freundlich L-type isotherm described the adsorption process, which showed a high affinity between herbicides and sorption sites mainly because of hydrophobic and H-bonds interaction. Penoxsulam showed the highest adsorption coefficients (4.23 ± 0.72 to 10.69 ± 1.58 mL g^?1) and were related to soil pH. Molinate showed K_d values between 1.72 ± 0.01 and 2.3 ± 0.01 mL g^?1and were related to soil pH and organic matter, specifically to the amount of humic substances. Bentazon had a high relationship with pH and humic substances and its K_d values were the lowest, ranging from 0.11 ± 0.01 to 0.42 ± 0.01 mL g^?1. MCPA K_d ranged from 0.14 ± 0.02 to 2.72 ± 0.01 mL g^?1, however its adsorption was related to humic acids and clay content. According to these results, the soil factors that could explain the sorption process of the studied herbicides under paddy rice soil conditions, were principally humic substances and soil pH. Considering the sorption variability observed in this study and the potential risk for groundwater contamination, it is necessary to develop weed rice management strategies that limit use of herbicides that exhibit low soil adsorption in areas with predisposing conditions to soil leaching.     

Synthesis of a highly recoverable 3D MnO2/rGO hybrid aerogel for efficient adsorptive separation of pharmaceutical residue

Water contamination by non-steroidal anti-inflammatory drugs, such as acetaminophen, is an emerging ecological concern. In this study, a new three-dimensional manganese dioxide-engrafted reduced graphene oxide (3D MnO₂/rGO) hybrid aerogel was developed for acetaminophen sequestration. The synthesis involved firstly the self-assembly of GO aerogel, followed by thermal reduction and in-situ MnO₂ growth by redox-reaction. The aerogel demonstrated interlinked planes with smooth surfaces deposited with MnO₂ nanospheres and pores of 138.4 – 235.3 µm width. The influences of adsorbent dosage, initial pH, acetaminophen concentration, temperature and contact time were investigated. It was determined that the adsorption of acetaminophen occurred on uniform sorption sites in the aerogel, as suggested by the best fit of data to the Langmuir isotherm, yielding a maximum adsorption capacity of 252.87 mg/g. This highest adsorption performance of the 3D MnO₂/rGO aerogel was attained at a dosage of 0.6 g/L, initial pH of 6.2 and temperature of 40°C. The process kinetics were in-line with the pseudo-first-order and pseudo-second-order kinetics at 10 and 20 – 500 mg/L concentrations, respectively. Thermodynamic assay showed the spontaneity and endothermicity features of the 3D MnO₂/rGO-acetaminophen system. The acetaminophen adsorption mechanisms were mainly hydrogen bonding and pore entrapment. Moreover, the as-synthesised aerogel was effectively regenerated using acetone and re-utilised in four adsorption-desorption cycles. Overall, the results highly recommend the implementation of the 3D MnO₂/rGO hybrid aerogel for purification of wastewater polluted by acetaminophen residue.     

Capability and limitations of first-order and diffusion approaches to describe long-term sorption of chlortoluron in soil

This paper compares the capability of a first-order and a spherical diffusion model to describe and predict long-term sorption and desorption processes of chlortoluron in two soils. Chlortoluron sorption was investigated at different time scales utilizing one rate experiment (120 days) and two sorption/desorption experiments. Experimental periods for sorption and desorption were set to 1 day (five desorption steps) and 30 days (three desorption steps), respectively. Upon fitting, the two models satisfactorily described the whole set of data. The spherical diffusion model performed better than the first-order model. We then tested the predictive capability of the models by predicting 30-day sorption/desorption data using kinetic parameters fitted on 1-day sorption/desorption data only. While the spherical diffusion model was able to predict the 30-day data set, the first-order model failed completely. Fitting both models to subsets of the data corresponding to different experimental time scales revealed that the rate parameter as well as the Freundlich coefficient of the first-order model are strongly time-dependent--a property that is not shared by parameters of the spherical diffusion model. The apparent stability of the spherical diffusion model with regard to time dependency of its parameters indicates that sorptive uptake may be diffusion-controlled. This also explains the models greater predictive power across different time scales compared to the first-order model. Finally, we investigate the suitability of solute class specific log-linear relationships between the first-order rate parameter and the Freundlich coefficient presented by earlier researchers in the light of the time dependency observed for the parameters of the first-order model.     

Siloxanes removal from biogas by high surface area adsorbents

Biogas utilized for energy production needs to be free from organic silicon compounds, as their burning has damaging effects on turbines and engines; organic silicon compounds in the form of siloxanes can be found in biogas produced from urban wastes, due to their massive industrial use in synthetic product, such as cosmetics, detergents and paints.Siloxanes removal from biogas can be carried out by various methods (Mona, 2009, Ajhar et al., 2010, Schweigkofler and Niessner, 2001); aim of the present work is to find a single practical and economic way to drastically and simultaneously reduce both the hydrogen sulphide and the siloxanes concentration to less than 1 ppm. Some commercial activated carbons previously selected (Monteleone et al., 2011) as being effective in hydrogen sulfide up taking have been tested in an adsorption measurement apparatus, by flowing the most volatile siloxane (hexamethyldisiloxane or L2) in a nitrogen stream, typically 100–200 ppm L2 over N₂, through an activated carbon powder bed; the adsorption process was analyzed by varying some experimental parameters (concentration, grain size, bed height). The best activated carbon shows an adsorption capacity of 0.1 g L2 per gram of carbon. The next thermogravimetric analysis (TGA) confirms the capacity data obtained experimentally by the breakthrough curve tests.The capacity results depend on L2 concentration. A regenerative carbon process is then carried out by heating the carbon bed up to 200 °C and flushing out the adsorbed L2 samples in a nitrogen stream in a three step heating procedure up to 200 °C. The adsorption capacity is observed to degrade after cycling the samples through several adsorption–desorption cycles.     

Enhancement of copper and cadmium adsorption on kaolin by the presence of humic acids

The competitive adsorption equilibrium isotherms of Cu²⁺ and Cd²⁺ on kaolin have been measured at 298 K, in the presence and the absence of humic acids (HAs). HAs were found to enhance the metal adsorption capacity of mineral surfaces, in particular kaolin. This enhancement was also observed in the competitive adsorption of copper and cadmium on kaolin and kaolin–HA complex. This competitive adsorption shows that the presence of Cd²⁺ has not an important effect on Cu²⁺ adsorption, whereas a dramatic decrease is observed on the adsorption of Cd²⁺ in the presence of Cu²⁺. The Freundlich isotherm equation was found to provide an excellent fit to the experimental data. These results were compared with the independent adsorption of both heavy metals.     

Adsorption and recovery of phosphate from water by amine fiber, effects of co-existing ions and column filtration

A weak-base adsorption fiber, acrylic amine fiber (AAF), was prepared for removal and recovery of phosphate from water. The adsorption properties of the AAF for phosphate and effects of co-existing ions were investigated using batch and column filtration experiments, scanning electron microscope, and Fourier transform infrared techniques. Experimental results showed that AAF had a high phosphate adsorption capacity of 119?mg/g at pH?7.0. The effects of calcium, sulfate, carbonate, nitrate, and fluoride showed that sulfate and calcium inhibited phosphate adsorption. However, AAF showed higher binding affinity toward phosphate than sulfate. Column filtration results showed that AAF could filter 1420 bed volumes of tap water containing 1.0?mg-P/L of phosphate. The saturated AAF could be regenerated using 0.5?mol/L hydrochloric acid solution and reused. After desorption, phosphate was recovered through precipitation of hydroxyapatite (Ca₅(PO₄)₃OH). The easy of regeneration, good adsorption performance, and the fiber morphology of AAF make it an attractive alternative for phosphate recovery from multiple water sources.     

Facile synthesis of graphene-based hyper-cross-linked porous carbon composite with superior adsorption capability for chlorophenols

In this work, we proposed a green and cost-effective method to prepare a graphene-based hyper-cross-linked porous carbon composite (GN/HCPC) by one-pot carbonization of hyper-cross-linked polymer (HCP) and glucose. The composite combined the advantages of graphene (GN) and hyper-cross-linked porous carbon (HCPC), leading to high specific surface area (396.93 m²/g) and large total pore volume (0.413 cm³/g). The resulting GN/HCPC composite was applied as an adsorbent to remove 2,4-dichlorophenol (2,4-DCP) from aqueous solutions. The influence of different solution conditions including pH, ionic strength, contact time, system temperature and concentration of humic acid was determined. The maximum adsorption capacity of GN/HCPC composite (calculated by the Langmuir model) could reach 348.43 mg/g, which represented increases of 43.6% and 13.6% over those of the as-prepared pure GN and HCPC, respectively. The Langmuir model and pseudo-second-order kinetic model were found to fit well with the adsorption process. Thermodynamic experiments suggested that the adsorption proceeded spontaneously and endothermically. In addition, the GN/HCPC composite showed high adsorption performance toward other organic contaminants including tetracycline, bisphenol A and phenol. Measurement of the adsorption capability of GN/HCPC in secondary effluent revealed a slight decrease over that in pure water solution. This study demonstrated that the GN/HCPC composite can be utilized as a practical and efficient adsorbent for the removal of organic contaminants in wastewater.     

Nb2O5 nanowires in-situ grown on carbon fiber: A high-efficiency material for the photocatalytic reduction of Cr(VI)

Niobium oxide nanowire-deposited carbon fiber (CF) samples were prepared using a hydrothermal method with amorphous Nb₂O₅·nH₂O as precursor. The physical properties of the samples were characterized by means of numerous techniques, including X-ray diffraction (XRD), energy-dispersive spectroscopy (EDS), scanning electron microscopy (SEM), transmission electron microscopy (TEM), selected-area electron diffraction (SAED), UV–visible spectroscopy (UV–vis), N₂ adsorption–desorption, Fourier transform infrared spectroscopy (FT-IR), and X-ray photoelectron spectroscopy. The efficiency for the removal of Cr(VI) was determined. Parameters such as pH value and initial Cr(VI) concentration could influence the Cr(VI) removal efficiency or adsorption capacity of the Nb₂O₅/carbon fiber sample obtained after hydrothermal treatment at 160°C for 14 hr. The maximal Cr(VI) adsorption capacity of the Nb₂O₅ nanowire/CF sample was 115 mg/g. This Nb₂O₅/CF sample also showed excellent photocatalytic activity and stability for the reduction of Cr(VI) under UV-light irradiation: the Cr(VI) removal efficiency reached 99.9% after UV-light irradiation for 1 hr and there was no significant decrease in photocatalytic performance after the use of the sample for 10 repeated cycles. Such excellent Cr(VI) adsorption capacity and photocatalytic performance was related to its high surface area, abundant surface hydroxyl groups, and good UV-light absorption ability.